Question about 2002 Chevrolet TrailBlazer

1 Answer

Head light bulb replacement 2003 chevy trailblazer

My low beam bulb is burnt out in my o3 trailblazer. i got a new bulb but not sure how to put it in?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,027 Answers

Simple! (I have the same model as well) Pop off the front chevy grill - it's held on with spring clips. Then look at the headlight assembly - there are 2 slide clips on either side, near the top - they have a tab that is bent forward - lift them UP. It may take a little force as they are usually stiff. The headlight assembly can then be pulled off the car, and the bulbs replaced.

Posted on Apr 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2008 chevy Equinox. When the headlights are on normal, the left one works but the right one doesn't. When I switch the high beams on, the right works but the left doesn't. Any suggestions?


Head lights are a two stage bulb. One filiment for low beam. One filiment for high beam. The low beam filiment is burnt out . a new set of headlight bulbs will fix you up.

Sep 16, 2015 | Cars & Trucks

1 Answer

Issues with 2003 Chevrolet TrailBlazer


low beam will go out automatically whem brigt beams click on

Sep 17, 2012 | 2003 Chevrolet TrailBlazer

1 Answer

Low beam on 2006 trailblazer quit working but have high beam


probably just a burnt out bulb. You do not have to replace the whole headlight as on older vehicles , just the small bulb inside.
I would hope that your friendly local chevy dealer would be happy to do it for just the cost of the bulb. Also some parts stores like pep boys or autozone will help customers out with quick easy fixes like that.

Sep 20, 2010 | 2006 Chevrolet Trailblazer

1 Answer

How do you get to the low beam to replace it on a 2003 chevy trailblazer. it is burnt out and i can't find how to remove it to replace it.


there is an access cover at the rear of the headlamp that you need to remove. once you do that you will gain access to the headlight bulb. remove the electrical connector and then twist the bulb counterclockwise to remove it.

Sep 23, 2009 | 2006 Chevrolet Trailblazer Ext

1 Answer

2005 chevy trailblazer one head light works the other won't. The high beams both work.


you need a low beam bulb or if combo light it will replace both go to walmart get a bulb dont touch bulb with fingers use clean rag

Jun 16, 2009 | Chevrolet TrailBlazer Cars & Trucks

1 Answer

Electrical low-beam headlight wire on 02 Chevy Trailblazer burnt


Get yourself to a junkyard and pack yourself a light lunch while you're at it. Take a leisurely stroll through the junk that closely resembles the one you need parts for. Go to the closest wiring harness to the headlight assembly, take your time and don't go trying to **** it, and unplug it from the bulbs up front. Make a simple and straight forward swap and do take the time to stop and smell the junkers, it's quite relaxing! Then, you should seriously make sure your new wiring harness is properly grounded (!), which I suspect to have been a contribing factor to your problem of overheating the bulb socket. Do take the time to go over the stuff that should be grounded and make it so. Th e job is quite simple and well worth you taking the time to do it yourself.

May 27, 2009 | 2002 Chevrolet TrailBlazer

1 Answer

2004 chevy trailblazer low beams not working fuses good bulbs new


Check the relay or your head light switch has gone bad. 

Apr 06, 2009 | 2004 Chevrolet TrailBlazer

2 Answers

2004 chevy trailblazer low beam sensor


I just fixed my light problem tonight. you need to switch your relay #45 with #46 it will fix the light problem i am calling chevy in the morning to complain

Jan 08, 2009 | 2004 Chevrolet TrailBlazer

4 Answers

Replace low beam headlight on 2003 chevy trailblazer


I just replaced the low-beam bulb on my 2003 Chevy Trailblazer. The grill just needs to be loosed slightly. Then, raise two L shaped brackets, one on each side. For the inside one, I needed to use a flathead screwdriver to get to it. The light assembly can then be pulled out. Remove the rubber cover and rotate the bulb one quarter turn left to release it. Pull out the bulb, replace with a new one ($11.50) from Advance Auto Parts, and reverse the process. Once I figured it out, took about 10 minutes total.

Jan 05, 2009 | 2006 Chevrolet Trailblazer Ext

1 Answer

How to change bulb on drivers side low beam head light


My niece has a jimmy, they should be the same. The inside should be the high beam, the outside the low, DO NOT TOUCH THE GLASS ON NEW BULBS! Oil will cook on them and pop them! Both come off the same way. Take off the big rubber thing. They are soft but over hard plastic. Just pull them off. If you have trouble, you can flip the little wire clips that hold the headlight housing in place, this will give you room to see the rubber caps enough to figure them out better. The bulb assembly rotates CCW counter clockwise, and should slip out easily. Take the wires and plug off. it should be obvious how it pulls off. Snap the new bulb into the wires without touching the glass part. Gently replace in backwards order as you removed it. Put the rubber caps on, they keep water off the bulbs. It will break them!

The passenger side was harder for me. I had to take the air cleaner off, the whole cover and filter.You should be able to see or feel the same type caps, The low beam outside, High beam inside. The same 2 wire clips are there to release the housing. Everything pretty much goes the same, other than the air cleaner has to be removed and replaced. And make sure the rubber cap is replaced! Good Luck and good motoring!

Dec 15, 2008 | 2005 Chevrolet Trailblazer Ext

Not finding what you are looking for?
2002 Chevrolet TrailBlazer Logo

1,169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...