Question about 1995 Oldsmobile Cutlass Supreme

2 Answers

The steeing column in my 95 Olds Cutlass

Replaced the steeing column in my 95 Olds Cutlass supreme...security light now comes on and the car won't start

Posted by on

  • Anonymous Mar 13, 2014

    Need whole light and casing

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Your problem sounds like the transponder in your ignition cylinder, the key has to match the radio waves that the transponder puts out

Posted on Oct 27, 2012

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Does the key have a computer chip built into it. i think it does . if this is the case that,s your problem. the key has to match the computer in the car it,s programed from the factory like this. you either have to use the original ignition lock and key or get the lock in your new column keyed to your original key by a lock smith. than your car will start. good luck.

Posted on Apr 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1994 Oldsmobile Cutlass Supreme electrical problem with the ignition key or cylnder column for ignition. Not sure what is causing this issue? Could it be that the key is bad and needs to be reset...


I am having the same problem with my 1994 Olds Cutlass. The connection between the ignition and the starter is malfunctioning, and the car will not start. One moment is was fine, the next it won't start. Were you able to resolve the problem on your Cutlass?

Sep 14, 2010 | 1994 Oldsmobile Cutlass Supreme

2 Answers

I have a 95 cutlass and sometimes it don't start. I turn the ignition and the lights etc come on but that's it. I don't even get any "click" from the starter likes its trying to start. What I have noticed...


I had the same problem with my 1995 Cutlass Supreme. Finally it would not start at all and I noticed the security light on the dash would not go off after I turned the key. It wound up being the ignition switch. I replaced it and no problems. The only trouble is that your old ignition keys do not work with the new switch.

Mar 08, 2010 | 1995 Oldsmobile Cutlass Supreme

2 Answers

Security light staying on 1995 olds cutlass


Go to good locksmith and make a copy of ignition key.Your keys must be badly worn and or resistor(antitheft)could be weak.Good locksmith can make you a new replacement at reasonable price.Also make sure you wipe ignition key if it gets wet.If it wont start wait 3 mins minimum before trying to restart.
Last resort would be changing ignition on column.

Feb 03, 2010 | 1995 Oldsmobile Cutlass Supreme

3 Answers

My 1997 Olds Cutlass Supreme won't turn over


Better have the starter, battery and chargeing system all tested. A starter can cause the problem.

Oct 30, 2009 | 1997 Oldsmobile Cutlass Supreme

1 Answer

89 olds cutlass supreme hard time turning over


My 89 olds cutlass did the same thing....Shop fixed her, they replaced the knock sensor....I also had the fuel filter replaced, they sold me a can of MG injector cleaner too..Out on the highway the service engine light would come on and she would cut out under a load....Then she would crank but not start ( she would start eventually).....Runs great now....bill was $250

Aug 18, 2009 | 1993 Oldsmobile Cutlass Supreme

1 Answer

I need to replace turn signal switch on 97 olds cutlass supreme.


Disconnect the battery to do any service on the steering column or front radiator areas.

Jun 30, 2009 | 1997 Oldsmobile Cutlass Supreme

1 Answer

I have a 96 Olds Cutlass Supreme that intermittently won't start


If the lights on the dash all come on but the engine wont turn over it could be a problem with the VAT security system. Your key has a little chip on it between the teeth and the handle. This is a common problem with GMs', often just replacing the key is necessary but sometimes the VAT module needs to be replaced.

Jun 18, 2009 | 1996 Oldsmobile Cutlass Supreme Coupe

2 Answers

1994 oldsmobile cutlass supreme will not start.security flashes


Sounds like a RFID issue. Your key most likely has a chip inside of it. Most of the time people will have multiple keys on their key chain that can cause interference with the receiver in your steering column. Try using the one ignition key to start.

Jan 10, 2009 | 1994 Oldsmobile Cutlass Supreme

2 Answers

Trying to start a 1994 Olds Cutlass Supreme and wont turn over.


Does it crank at all or is there nothing when you turn the key? If the resistor chips in the key(s) are bad, they shut down the fuel system for 3 minutes and it won't crank. I've had this happen and the problem was solved when I got new keys.

Jan 08, 2009 | 1994 Oldsmobile Cutlass Supreme

Not finding what you are looking for?

Open Questions:

See all 1995 Oldsmobile Cutlass Supreme Questions

1995 Oldsmobile Cutlass Supreme Logo

270 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7711 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...