At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I checked the fuses and they are OK. Replaced the light switch, also. Does the multi-switch on steering column effect the headlights?I checked the fuses and they are OK. Replaced the light switch, also. Does the multi-switch on steering column effect the headlights?
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
How to remove headlamp
James, Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
open hood.behind plastic headlight assembly,towards the corners,locate two square metal 'tabs' these are the 'handles' of the retaining brackets pry/pull straight out.remove bolt near grille opening.pull assembly forward to access lamp socket.turn socket counterclockwise,remove & replace bulb.do not touch glass of a halogen bulb,the oil from your fingers will cause a 'hot spot' & bulb may fail prematurely.clean 'touched' bulb w/ alcohol.
the filament on the low beam burnt out. but the high beam didn't. You have a filament for each. 1 for high beam and 1 for low beam in the same light bulb. You need a new head light.
under the hood unplug the headlamp bulb twist off the sleeve that holds the bulb and pull out the bulb assy do not touch the glass of the bulb when installing the new one
FROM INSIDE ENGINE COMPARTMENT, YOU MAY HAVE TO PULL BATTERY DEPENDING ON SIDE. LOCATE THE WIRE HARNESS TO BULB. TURN COUNTER CLOCKWISE TO REMOVE SOCKET. WHERE GLOVES WHEN HANDLING BULB. REMOVE AND INSERT NEW ONE. REVERSE PROCEDURE
I checked the fuses and they are OK. Replaced the light switch, also. Does the multi-switch on steering column effect the headlights?
×