Question about 2003 Chrysler Town & Country

1 Answer

Left low beam headlight on Chrysler 2003 T&C wont work while engine is on

I replaced a left headlight bulb on 2003 Chrysler Town and country. Low beam on left side keeps going out but right side and both high beams worked. I have replaced bulb twice and it does the same thing. Low beams will work with the engine off but left one will not work with engine on. EDC

Posted by on

  • Anonymous Apr 25, 2009

    2002 town and country - switch fro high beam to low beam and both low beams are out !

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Chrysler Master
  • 1,130 Answers

Ill guarantee you have an electrical short on the left side of the headlight switch,circuit.From here its immpossible for me to go any further.Good Luck.,Get A Wiring diagram.

Posted on Apr 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My Chrysler 300C left headlight low beam won't light up . I've brought new bulbs and still the left low beam light did not glow! I swapped bulbs around and the left bulb that wasn't working now glowed in...


Check the socket or connections that supply power to the bulb Sometimes the contacts can become corroded. Also, a loose or corroded ground wire can cause a bulb to not work or glow dimly.

Feb 19, 2015 | Chrysler Cars & Trucks

1 Answer

2005 Chrysler town and country. Headlights stopped working at the same time. Brights still work. All other lights still work. Any ideas?


If the low beam headlights don't work, and the bulbs are good, the problem can be in the headlight switch or the dimmer switch among other things.

Jul 08, 2012 | Cars & Trucks

2 Answers

1999 Chrysler T&C Limited - Driving lights/Fog Lights


The fuses that protect your headlamp circuits are Fuse Numbers [4] (Left High Beam), [5] (Right High Beam) [6] (Left Low Beam) and [7] (Right Low Beam).
Fuse 4 is a 10 Amp fuse
Fuse 5 is a 10 Amp fuse
Fuse 6 is a 20 Amp fuse
Fuse 7 is a 15 Amp fuse
All are located in the Power Distribution Center in the engine compartment.

The difference between a 1999 Chrysler Town & Country with DRL and WITHOUT DRL is that one has a DRL module and the other does not. The headlmps themselves are wired exactly the same.

To make yours work, you would have to add the DRL module and reprogram your Body Control Module (BCM) to accept the DRL module. Doing it any other way would probably result in the BCM setting fault codes and possibly even causing malfunctions in other non-headlamp-related circuits.

Apr 22, 2012 | 1999 Chrysler Town & Country

1 Answer

How to replace our low beam headlight on 1999 town and country


1.) Open the hood of your van 2.) On the passenger side of the vehicle, look behind the headlight enclosure. You will see a set of wires running into the back of it. This is the power clip. Either with your hand or a flat-head screwdriver, pop the power clip off.
3.) There is a plastic ring encasing the light bulb. Turn the ring counter-clockwise and pull it out of the socket and set it aside.
4.) Pull firmly on the light bulb to remove it.
5.) Place the new light bulb into the same opening. Be careful not to touch the glass part of the new bulb. The oils in your skin can substantially reduce the life of the new bulb.
6.) Replace the plastic ring and turn it clockwise to lock it in place.
7.) Reattach the power clip to the back of the bulb.

Oct 29, 2009 | 1999 Chrysler Town & Country

1 Answer

Replacing low beam headlights


if equipped with sealed beam lights,remove screws from trim panel surrounding headlights.remove 4 screws from headlight bezel [silver rectangle that retains bulb] unplug connector.do not remove adjustment screws. halogen bulbs may be reached from engine compartment,behind light assembly.

Oct 13, 2009 | 2000 Chrysler Town & Country

1 Answer

2003 Chrysler Town & Country Headlight & signal light problem.


Right headlight sounds blown to me. Other problem needs to be looked at.

Aug 16, 2009 | 2005 Chrysler Town & Country

2 Answers

Headlight repair on 2003 Mercedes Benz E320


how do you change left low beam bulb on 2003 mercedes e320

Mar 15, 2009 | 2003 Mercedes-Benz E-Class

1 Answer

Headlights don't work, low or high beam-


Light switch bad or check all head lightrelays . 2 dim ones and 2 high beam ones. one is bad.

Mar 14, 2009 | 2005 Chrysler Town & Country

Not finding what you are looking for?
2003 Chrysler Town & Country Logo

916 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...