Question about 1998 Buick Park Avenue

2 Answers

'98 Buick Park Avenue Signal Switch Replacement

I have diagnosed my turn signal problem from the fuses, wiring, and signal stat to the signal switch in my 1998 Buick Park Avenue. I have the manual for models ranging between the years 1985 to 2002, but the instructions and diagrams are the most clear for older models. It would be helpful to have a set of instructions and diagrams for my specific year, make, and model.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have same problem with my 1998. How do I find instructions for replacement of same.

Posted on Apr 19, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

This is info on how to repair a window regulator on a 1988 buick park avenue. I am sure its a start if you are looking for this kind of info. I googled it and this is the link I was given.
http://www.ehow.com/how_4577019_buick-park-avenue-side-window.html
I am sure you can find your year and info starting here or at google and just type in your question. You be amazed on how easy it is to find LOADS of info...

Posted on Jun 16, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the module for the flashers? Is it the normal round one? 1998 Buick Park Avenue


No it is not . It's a module . 1998 Buick Park Avenue Hazard Warning and Turn Signal Flasher Under the dash Turn Signal Flasher
Under the left side of the IP, to the right of the steering column .

Mar 07, 2017 | 1998 Buick Park Avenue

1 Answer

I have a 2002 Park Avenue my turn signals do not work my flashers work


gmlogoflat.gifService Information
2002 Buick Park Avenue ' Park Avenue (VIN C) Service Manual ' Body and Accessories ' Lighting Systems ' Description and Operation ' Document ID: 643323


Turn Signal/Cornering Lamps
The HZDT/SIG fuse in the fuse block - underhood - left supplies battery positive voltage to the turn signal/hazard flasher module and have ground at G202. The turn signal lamps may only be activated with the ignition switch in the ON or ACCY position. The T/SIG fuse in the fuse block - underhood - left supplies battery positive voltage to the turn signal switch. When the turn signal switch is placed in either the left or right position, current flow is from the turn signal switch assembly to the turn signal/hazard flasher module. The turn signal/hazard flasher module then sends an on-off voltage signal to either the left or right turn signals and their instrument cluster (IPC) indicator. When the hazard switch is pressed, all the turn signal lamps will flash including both IPC turn signal indicators. The left turn signals have ground at G106, G400 and at G402. The right turn signals have ground at G105 and G400. The turn signal switch supplies battery positive voltage to the cornering lamps, the left cornering lamp has ground at G105 and the right cornering lamp has ground at G106.
+snpvvsvwho06+5aqhepgaaaabjru5erkjggg==










2002 Buick Park Avenue ' Park Avenue (VIN C) Service Manual ' Body and Accessories ' Lighting Systems ' Description and Operation ' Document ID: 643323

May 10, 2016 | Cars & Trucks

1 Answer

Right blinker not working 1999 Buick park avenue


You'll need to find a wiring diagram an component location chart to check this out . Here is a diagnostic flow chart for trouble shooting this problem ! Do you know how to use a voltmeter ?
DEFINITION: This table diagnoses inoperative turn signals on one side. It assumes that the cornering lamps, hazard lamps, and turn signals on the other side all operate properly.

1

Did you perform the Exterior Lights System Check?
--
Go to Step 2 - yes
Go to Exterior Lights System Check - no

2

  1. Disconnect the turn signal flasher connector.
  2. Turn the ignition switch to the RUN position.
  3. Place the turn signal switch in the appropriate position.
  4. Connect a DMM from the appropriate turn signal flasher connector cavity to ground:
?€¢
LH: cavity C (ORN)


?€¢
RH: cavity B (BLK)

Is the voltage within the specified range?
10-15 V
Go to Step 3 yes
Go to Step 5 no

3

Connect a fused jumper between the appropriate turn signal flasher connector cavities:
?€¢
LH: cavity C (ORN) to cavity D (YEL)


?€¢
RH: cavity B (BLK) to cavity F (TAN)

Do the appropriate turn lamps light without flashing?
--
Go to Step 4 yes
Go to Step 6 no

4

Replace the turn signal flasher. Refer to Hazard and Turn Signal Flasher Replacement .
Is the repair complete?
--
Go to Exterior Lights System Check
--

5

Repair the open in the appropriate circuit:
?€¢
LH: CKT 57 (ORN) between S200 and the turn signal flasher


?€¢
RH: CKT 58 (BLK) between S201 and the turn signal flasher

Refer to Wiring Repairs in Wiring Systems.
Is the repair complete?
--
Go to Exterior Lights System Check
--

6

Repair the open in the appropriate circuit between the turn signal flasher and the IP fuse block:
?€¢
LH: CKT 685 (YEL)


?€¢
RH: CKT 686 (TAN)

Refer to Wiring Repairs in Wiring Systems.
Is the repair complete?
--
Go to Exterior Lights System Check

May 09, 2015 | 1999 Buick Park Avenue Ultra

1 Answer

1997 buick park avenue right turn signal wont work


if fuse and bulb Are still working then there is a problem with supply or connecting wires..!!!!!!!

Mar 23, 2012 | 1997 Buick Park Avenue

1 Answer

Cant find turn signal relay on a 1999 buick park avenue


Should be a little(usually silver) square box plugged into your fuse panel, usually above your left leg in drivers seat. Most vehicles , although i am not familiar with the Park Avenue. Probably has a cover that would have to be dropped.

Nov 23, 2010 | 1998 Buick Park Avenue

1 Answer

1998 Park Avenue: where is the fuse box on a 1998 buick park ave?...


i have a 98 buick park avenue
i got a problem running it. it start but when i hit the break pedal some light comes out the direction signal and it shuts off i check all the fuse

May 17, 2010 | 1998 Buick Park Avenue

1 Answer

98 Buick Park Ave: Rt turn signal does not work


Hi you may have a poor earth connection to the lights or a wire from the lights is touching the car body or another wire.

Was the relay switch new that you replaced? the one behind the dash?

Regards
Dan

Feb 10, 2010 | Buick Park Avenue Cars & Trucks

1 Answer

Install Turn signal switch on a park ave 98


remove the cover and you will see the bolts holding it on.some times you have to remove the steering wheel.you have to disconect the wire harness as well.

Aug 17, 2009 | 1998 Buick Park Avenue

Not finding what you are looking for?
1998 Buick Park Avenue Logo

1,284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

80608 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...