Question about 2005 Pontiac G6

1 Answer

I need to replace my instrument cluster in a 2005 pontiac G6 GT but have never done this before and need help on how to do this or if it is even possible to do this on my own!

Posted by on

  • blueextc3221
    blueextc3221 May 11, 2010

    its plug and play - once the trim around it is removed - the cluster will remove with 4 screws.

    unplug old, and reverse to install.

    Simple job - should be about 1 hours work.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 678 Answers

Electronics in automobiles are becoming extremely complex. The cluster will likely have to be flashed with the correct programming at a dealer once it's replaced. The actual replacement of the cluster may not require much more then a few simple hand tools. However having it work correctly or at all once replaced will require a special handheld computer with the correct software. Unfortunately for this problem it looks like the best option is to bring it to repair facility with the correct equipment.

Posted on Apr 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 G6 2.4 I'm checking resistance from CKP to ECM. Is 2.5 ohms too much? The RPM guage is inop.Scan tool shows CKP rpms, but not on IP.


Does the vehicle start an run ? If so the crank sensor is not your problem . It's the gauge , probably bad . GM had defective step motors in thier instrument clusters from 2003 to 2006 ! what type scan tool are you using ? Can it check instrument cluster data ? The pcm sends info for the instrument cluster over GMLAN serial data network . Do you know what that is . How to repair GM Instrument Cluster Speedometer Gauge Stepper

Mar 18, 2017 | Pontiac G6 Cars & Trucks

1 Answer

How to change thermostat 2005 pontiac g6 3.5


You are in luck there is a video on YouTube
Replacing Thermostat 2006 G6 GT


You will also need to bleed the air out of the cooling system so here is a video of that.
How to Bleed Coolant on 3 5 Pontiac G6

Feb 27, 2017 | Pontiac Cars & Trucks

3 Answers

Where is the fuse for instrument cluster in a 2006 pontiac g6 4cly 2.4 litr


You pull the cover off of the fuse block, And on back of the cover it should list what fuses are where. i have attached your owners manual and some diagrams of the fuse box
http://www.vadengmpp.com/owners-manual/pontiac/2006-Pontiac-G6.pdf 2006 pontiac g6 fuse diagram Google Search

Mar 03, 2016 | Pontiac Cars & Trucks

1 Answer

I have a 2005 pontiac g6 & my dashboard fuse has went out. The dash doesn't show the speed and gas fuel. What fuse has went out?


Open up the access panel on the passenger side - see pic below.
f234998.jpg
You;re looking for a reddish color 10 fuse located on the bottom right in the fuse box. This should be the fuse for the instrument panel. Hope that helps.

Oct 15, 2010 | 2005 Pontiac G6

2 Answers

Speedometer on 2002 pontiac sunfire not working how to fix


Pretty common problem with these. Here's a guide to learn how to fix GM instrument clusters yourself, I used it to fix mine and it worked great.How to guide for Sunfire instrument cluster repair

Aug 22, 2010 | 2005 Pontiac Sunfire

1 Answer

G6 won't start. Says


sounds like u are have scurity probs with the car not reconizing the key or it thinks its not in park there will bea code stored in the history of the ecm u will have to take it to a dealer have them just diag it that will let u know what needs to be done

Jan 08, 2010 | 2006 Pontiac G6

2 Answers

Where is the temperature guage located under the hood in my pontiac g6. I can not find it to replace.


The temperature gauge is actually a needle that read a range of Hot/Cold on the dash instrument cluster. If you are referring to the coolant temperature sensor, the location depends on the engine size. Post the engine size and we'll answer it better.

Oct 16, 2009 | 2006 Pontiac G6

1 Answer

Where transmission fluid dipstick tube on a 2005 pontiac G6 GT


alot do not have a dipstick jack car up and block as u need to go under car on front of trans is a plug about 4ins. up take out and fluid should come out

Apr 19, 2009 | 2007 Pontiac G6 GT Convertible

Not finding what you are looking for?
2005 Pontiac G6 Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...