Question about 1999 Oldsmobile Intrigue

4 Answers

Front signal light not working and rear signal lights flashing fast on 1999 intrigue

Posted by on

  • Blixer May 07, 2009

    Exact same car and year and exact same problem. Changed bulbs and still same problem. Hope this won't be a major electrical issue.

  • OReillyMan May 14, 2009

    I have the same problem. I've changed all the bulbs with brand new ones and i've checked every fuse but the front turning signals still don't work.. only the rear

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Your front turn signal socket is shot. Buy a new one at the dealer for about 30.00. It will fix it. You may be able to clean it and wiggle it to get it to work. But it wont last very long. I had the same problem. Replaced the socket and it is fine. Note: If one side is bad the other side it not far behind. Probably 2 or 3 months it will go also. Good Luck.
Bill

Posted on May 15, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Sorry changed all bulbs twice and still the same bulbs light in front and flash rapidely in back. same on both left & right.

Posted on May 05, 2009

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 25 Answers

Your front bulb is probably burnt, star by changing the bulb, easy & innexpensive.


Pierre

Posted on Apr 18, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 678 Answers

The rear signal light is flashing fast as a result of the bulb that is out in the front. Replace the front turn signal bulb and both problems will go away. There are usually visible screws retaining the lense assembly. Remove the screws and pull the lense out, twist the bulb socket and replace the bulb. If no screws are visible you may be able to access the bulb from behind the lense.

Posted on Apr 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Left back signal light doesn't work but front one flashes really fast


Check and replace the bulb first before you do anything else.

Jul 10, 2012 | 1999 Plymouth Voyager

1 Answer

99 olds intrigue front signals dont work rear ones do


the trun light signal socket is burn out you have to replace it

Jun 16, 2011 | 1999 Oldsmobile Intrigue

2 Answers

Left blinker flash fast, hit brake left blinker goes out left taillight goes out but both backup lights come on


Usually a fast flashing signal is because one of the bulbs is burned out or shorted out. If the signal and brakes use the same light which many cars do then check the wiring to it and replace bulb. If burns out again then it has a short between the signal switch and the actual light or the brake wiring to it is shorted.

Sep 03, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

The rear passenger turn signal/brake does not work.front turn signal and marker light flash.turn signal on dash flashes fast.have replaced and checked rear bulbs.think it may be a broken wire but not sure...


Check between connections, starting from back of lights. Turn hazards on and use a safety pin to poke through wire and test with test light, be sure to tape over hole.

Jan 06, 2010 | 1999 Chevrolet Suburban

1 Answer

Right signal lights not working. ive changed the bulbs still not working. the one at the back flickers really fast


flashing fast is because only one bulb is working. look for power to front signal light and check ground wire

Nov 30, 2009 | 2000 Oldsmobile Intrigue

2 Answers

Turn signals flashing too fast


Yes, This is easy. Recall on this problem. Take into dealer for free recall solution and it will stop.

Jun 24, 2009 | 1999 Buick Regal

2 Answers

Left rear turn signal light on my 1999 chev. s10 is not working


any increase in bink speed is direcly related to a bulb being burt out.

Jun 12, 2009 | 1999 Chevrolet S-10 Pickup

1 Answer

Front signal light Turn on but do not blink


try some electric contact lube in the light socket the leads may be corroded

Nov 18, 2008 | 2000 Oldsmobile Intrigue

1 Answer

Taillight and right turn signal not working


Does the light flash fast or is the light off? If flashes fast replace the flasher. If the light does not. Replace the bulb socket. Let me guess it's the rear socket bulb.

Jul 19, 2008 | 1999 Chevrolet Cavalier

Not finding what you are looking for?
1999 Oldsmobile Intrigue Logo

889 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...