Question about Chevrolet Tahoe

1 Answer

Wont shift out of 4wd low

My truck wont shift out of 4wd low. I put it in neutral and it still wont come out of 4wd low, the light just flashes then goes back to 4wd low help me, help me, help me plzzzzzzz!!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 126 Answers

It sounds like the motor on transfer case is bad .

Posted on Apr 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 Colorado 4x4 38000 miles. 4H wont engage, light wont stop flashing. Replaced the Actuator but still the same problem.


I am sure you already know this but will mention it anyway just for others that read your question. On all of my trucks you can not shift in or out of 4wd low unless transmission (not transfer case) is in neutral and vehicle pretty much stopped. The transfer case for 4wd low is geared so different that system will not change back out of low (or fully into low) unless trans control is telling computer that it is in neutral.

Jan 17, 2015 | 2009 Chevrolet Colorado

1 Answer

My gear shift neutral light wont come on in my 99 silverado. it goes in neutral but the light wont come on and if the neutral light dont light up it wont go in 4wd low all other 4wd functions work . anyone...


Hi,
Go search on a Chevy Forum, but likely the solenoid that shafts the transfer case is faulty. You might try resetting it by disconnecting the Neg. battery connection overnight....IF your truck has an alarm or radio key code you MUST know how to reset these b4 disconnecting the battery!!

GL,
Td

Oct 10, 2012 | 1999 Chevrolet Silverado 1500

1 Answer

I have a 1998 chevy k2500 pickup with a 5.7L V8. The problem i am having is with the 4wd. it has a 3 button electronic shift selector. when pressing the 4wd low button it will shift the motor and the front...


First, you do not need 4 low unless you're stuck out in the bush somewhere. Secondly, when you shift from 2 high to 4 high, it goes in immediately. To access 4 low, the tranny shifter must first be put into neutral, wait five seconds, then shift into 4 low. To shift out of 4 low back to 4 high, you must shift into neutral for 5 seconds again. They both flash at the same time because you have not shifted into neutral gear with the transmission.

Feb 02, 2011 | 1998 Chevrolet K2500

3 Answers

Wont disengage out of 4 wheel drive 1998 ford ranger first time its stuck in 4 low we have backed up turned switch numerous times shut it off and restarted


Be sure to put the truck in neutral, while engine is running, while you disengage from 4 wheel drive (low) to 4 wheel drive (high) and then finally to 2 wheel drive. It is critical to shift transmission into neutral when switching out of 4WD Low, as indicated in your owner's manual. Hopefully, this will help to FixYa problem!

Oct 14, 2010 | 1998 Ford Ranger SuperCab

2 Answers

Flashing 4WH and 4WL lights on the dash with switch position on Auto. What does it mean and what is needed to fix the problem? Car dirves fine.


This is purely a guess, but it seems to point towards the four wheel drive High and Low range, (Transmission)

Jul 12, 2010 | 1998 Ford Explorer

1 Answer

2005 gmc sierra. Manual shift 4wd. After using


When you are finished with your 4 wheel drive,put the transmission in neutral, disengage 4 wheel drive and shift to reverse then back up a couple feet before shifting to forward gear.

Jan 15, 2010 | 2005 GMC Sierra

2 Answers

Transfercase problem it is stuck in 4x4 low canot put it back in 2high connections look good


Try putting the transmission in neutral first then shift the 4wd switch to 4 hi.then try shifting normally.If the light on the 4wd is flashing there is a code in the 4wd system and you will need to get the code.Sometimes the encoder motor will gets week and will not be able to switch gears.

Nov 24, 2009 | 2000 Chevrolet Silverado

1 Answer

The 4wd light flashes non-stop. The vehicle is not in 4wd.


put in neutral, and neutral on 4wd tbar. rev motor to 1500rpm, put in high 4wd, let it click in, then low 4wd, then in 2wd.

Aug 09, 2009 | 1999 Mitsubishi Montero

1 Answer

4WD SWITCH DOES NOT DESELECT 4WD LOW


When you use 4w low you have to put the truck in neutral to shift into and out of low mode. If it still gives problems move the truck back and forth and see if you can unbind the gears and try again.

Jun 07, 2009 | 1998 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

456 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...