Question about 1994 Geo Metro

1 Answer

1994 Metro Geo rough idling and lagging up hills

I have a 1994 metro geo with a rebuilt engine in it, have had it for a little over 2 years and have put about 150,000 miles on it. I have had a problem with it recently to where it will lag going up hills, and has noticed a rough idling. We have replaced the spark plugs and bought a new air filter and had a oil change and oil filter, and also have had a fuel injection cleaner put into it. What should I do next?

Posted by on

  • Bill Eager May 11, 2010

    Do some diagnosticks first before you spend any more money.

    Compression test

    Vacume test

    Fuel pressure test, before and after the fuel filter.

    Then note the reults and we can take it from there.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Dunno if it'll fix it- but check your pcv valve - 5$ for a new one - also check your egr valve- should be able to move depress it with your finger- if not, carb cleaner is safe to use to clean it up- remove it and clean it. this should help the idle

Posted on May 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What are the fuses on a 1993 Geo metro


click metro here
and read
http://www.fixkick.com/
see those 2 forums.
or here
http://www.teamswift.net/index.php
GEO swift?

if you own any GEO, ANY.
be proactive (its old) and buy the books, then ask questions.
http://www.ebay.com/sch/i.html?_odkw=1993+geo+metro+operators+guide&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.X1993+geo+metro+operators+manual&_nkw=1993+geo+metro+operators+manual&_sacat=0

or get an account at alldata.com
or join a real forum and ask there.
or google all week.
those are the DIY choices.

or google like this, google really is your friend....

https://www.google.com/search?q=1993+geo+metro+fuse+box&source=lnms&sa=X&ei=cxrNU7DaDMuTyASOrYCwAQ&ved=0CAcQ_AUoAA&biw=1120&bih=516&dpr=1.71



Jun 04, 2014 | 1994 Geo Metro

1 Answer

I took motor/tranny out of well maintained/well running 1994 Geo metro xf and installed them in a 1995 geo metro LSI. everything went well i had to use the 1995 intake and throttle body due to wiring...


Yes, because the specs are different... most manufatures change the specs on vehicles every four years, so 90-94 is most likely all the same, but then you will have 95-99 an so on an so on.. Good Luck

Oct 23, 2010 | 1995 Geo Metro

2 Answers

My 94 geo metro runs very rough and has


you should check a throttle body valve or purge valve, choke valve

Feb 14, 2010 | 1994 Geo Metro

1 Answer

1994 Geo Metro Engine Rotates But Wont Start


check the timing belt it might have broken

Jul 09, 2009 | 1994 Geo Metro

2 Answers

Laging 1994 metro geo that is losing horse power


If your geo is losing power ,first thing to do is a comprision test .
if its testing any thing below 100 psi you may have to replace the piston rings.

Apr 20, 2009 | 1994 Geo Metro

1 Answer

Automatic 1994 metro 3 cyl.tranny takes a long time to shift


Sounds like the converter clutch is engaging. Maybe converter selonoid? Should get put on scanner to be sure.

Jan 20, 2009 | 1994 Geo Metro

1 Answer

When A/C is on engine idles rough, almost stalls engine


I have read your problem and you can easily get the solution of your problem at the given link toolsnyou.com they provide the service manuals.Do visit it once. http://toolsnyou.com/

Jul 31, 2017 | 1994 Geo Metro

1 Answer

1994 geo metro


It's actually super easy.
All you need is your year and make alternator belt and a wrench.
Take off the existing altenator, take off the old belt.
Once the altenator is off you'll be able to look further down below where the altenator was. You'll see a metal wheel that's a little bigger than the one on the altenator. This is where the new belt needs to wrap around.
I found it alot easier to wrap the belts around the two wheels before putting the altenator back on the engine.
Make sure that all bolts and seals are sound. (that's the last thing you need falling off in the middle of nowhere!)
Hope it helped!

Aug 29, 2008 | 1994 Geo Metro

1 Answer

1991 geo metro rough idle


i have no idea about an idle up solenoid relay but i had the same problem.. there is a hex screw on the motor that takes a very small allen wrench head where you can adjust the idle from there. its near the throttle body

Jul 02, 2008 | 1991 Geo Metro

2 Answers

Geo metro timing


how to put the timing chain back on the engin. what i need too know is how too set the point up?

Jun 07, 2008 | 1992 Geo Metro

Not finding what you are looking for?
1994 Geo Metro Logo

Related Topics:

475 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...