Question about 1998 Mazda Pickup

2 Answers

98 mazda 2300 truck wont fire or start

Truck normally runs excellent,but turned truck offand wouldnt start again or even fire.checked all fuses and the fuel pump relay sw. all OK seems to lack spark.is there a way to initiate the codes to find out what is wrong?

Posted by on

  • yadayada
    yadayada May 11, 2010

    are u sure u have fuel pressure, don't guess check.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 334 Answers

Check your coil and see if you have fire.if you have fire then you need to check your fuel pressure. i have a mazda 2600i that did the same thing and it was the coil .did your truck back fire when you shout it off?. if it did iam pretty sure its your coil.note there is a module in side the dis very few people know about this but they are not notted for going bad good luck

Posted on Apr 20, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

2001 Mazda 2300 won't crank battery good starter good what could be the problem

Posted on Oct 26, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 1996 Mazda 2300 and I need to know which fuse is my running lights. My dash light is out also


Parking (running) lights: Check 15A FUSE 3 in the I/P fuse panel.
I/P (dash) lights: Check 7.5A FUSE 11 in the I/P fuse panel.

Jul 11, 2017 | Mazda Cars & Trucks

1 Answer

Mazda wont start, brand new battery


sounds like you have a failing ecu. the capacitors in the ecu are worn out. there has been a lot of problems with the ecu on mazda's over the years, only take one out put overload from the alternator and the ecu starts playing up. no codes come up as it don't code its self. having the battery off is like a reset.

Mar 20, 2014 | 2007 Mazda 3 1.6

1 Answer

When jumped my truck runs but wont start again. i replaced battery and it still wont start


check the resistance on the wires from the battery to your fuse panel and your ground wires also check to make sure you have good connections inside your fuse box if all is good there try to bench test the starter by applying a direct 12 volt power supply to.

Nov 20, 2013 | 2001 Dodge Ram 2500 Truck

1 Answer

My 98 mercury mountaineer died and won't start


check fuse, check for fire, if no fire when turning over probably busted timing belt/chain, if fire then check for fuel

Sep 07, 2013 | Cars & Trucks

1 Answer

My 98 mazda prodege wont start only cranks over


Well you need spark at the right time, fuel, and normal compression to make the engine run.
So you would need to check for spark and fuel, then compression if necessary.

Jan 30, 2013 | 1998 Mazda Protege

1 Answer

1994 mazda b2300 changed the head and now no spark and wont start. timming marks are all lined up


i got a94 2300 5speed and i change coils packs module crank trigger and it does not have spark after i change all that and check every fuse an ignition swicth i got no spark who cant help me

Dec 30, 2011 | Mazda B-Series Cars & Trucks

1 Answer

1989 chevy 2500. started it up in driveway it died wouldnt start. changed ignition module drove it to town died wouldnt start again. got a diognostic tester which read throttle positioning sensor changed...


I WOULD CHECK IGNITION FUSE TO SEE IF POWER GOING TO COILS AND IGNITION MODULE. REPLACE DISTRIBUTOR CAP AND ROTOR.HAVE IGNITION TIMING CHECK.DISTRIBUTOR CAN SLOWLY WORK A LOOSE JUST A LITTLE TO THROW OFF IGNITION TIMING SO PLUGS WONT GET NO SPARK.

Jan 04, 2011 | Chevrolet 2500 Cars & Trucks

1 Answer

98 honda crv wont start unless bump started, starter motor?


will it start with a boost? either the starter motor or the battery. take the battery to auto zone and they will test it for you.

May 24, 2010 | 1998 Honda CR-V

1 Answer

96 Mazda Protege is dead and has no power, wont turn over!


check all your fuses sometime when giving a jump start
a surge of power a cures and blows out the main fuse

Nov 14, 2009 | 1996 Mazda Protege

2 Answers

Engine doesnt start 1991 ford ranger


the fuse should be in fuse box and be labled eec. if there is a fuse box under hood chk. there too. if its got a distributor, chk.madual

Jan 31, 2009 | 2000 Ford Focus

Not finding what you are looking for?
1998 Mazda Pickup Logo

344 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...