Question about 2004 Jeep Grand Cherokee

2 Answers

Brake Lights I have a 2004 Jeep Granad Cherokee. The brake lights will not work when the brake pedal is pressed.I have checked the fuses and the bulbs. Is there some kind of switch that can be replaced.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I just had this problem! I actually replaced the brake light switch, which is located up and under the dash by the brake. It cost only about 12 bucks at Autozone and is really easy to install. I sugguest plenty of lights and a small flat tip screw driver. Also, I cleaned all of my lights contacts in the rear light assembly with a metal file. Once I did all of this and checked my fuses voila!!! Lights! I hope this helps, it worked for me and I estimated it saved me about $250 bucks including labor at the local rip-off chrysler dealership.

Posted on Aug 06, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 55 Answers

Yes there is a switch located somewhere by the prake pedal. Go to your local auto parts store and they should be able to help you find the switch location.

Hope this helps

Matt

Posted on Apr 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2000 grand Cherokee Laredo v8 all my brake lights went out checked the bulbs fuse and brake switch all are good the tail and signal lights are good. what should I do nextto fix the problem


Have you checked the brake light fuse to see if there is power at the fuse and out of the fuse, also check the brake light switch for power in and out when the pedal is pressed, do that and get back to me.?

Oct 26, 2016 | 2000 Jeep Grand Cherokee Laredo

3 Answers

Brake lights do not work on a 2000 JEEP CHEROKEE SPORT. Bulbs are new ...


If you dont have any brake lights at all, I would assume it is not the lights themselves, but the brake light accuator on your brake pedal. It controlls when the lights come on and go off by how far the brake pedal is depressed. You can find it connected to the metal bracket that is your brake pedal,and replace it relatively cheap and easily.

Aug 10, 2010 | Jeep Cherokee Cars & Trucks

2 Answers

Have a 1995 jeep cherokee that both brake lights went out. all other lights working, signals, reverse, but not brake lights. fuse? have no owners manual. also a right hand drive


Most likely the fuse, if the fuse is good, then check the brake light switch, that is under the dash, near the top of the brake pedal.
Press on the brake pedal with your hand and see if the button is popping out, if not, tap on it and see if it pops out, if not, replace it.

May 05, 2010 | 1995 Jeep Cherokee

1 Answer

The brake lights don't work on my 04 jeep grand cherokee, the fuse is good.


Check your bulbs and your wiring. I would also make sure to check around your brake pedal. Sometimes that area trips the wiring if caught up.

Sep 19, 2009 | 2004 Jeep Grand Cherokee

2 Answers

How do i find the brake light fuse on my 2003 jeep grand cherokee? fuse 19 under the dashboard is antilock brakes. Is that the correct fuse?


That's for the abs system only, not the brake lights. All brake lights are not working? Check the brake light switch (aka stop light switch), which is attached to the upper brake pedal, and has a wire attached to it. If it's shot, the brake lights won't work. If this is not the problem, let me know so I can help further.

Sep 09, 2009 | 2003 Jeep Grand Cherokee

2 Answers

When lights are on and brake pedals are pressed all brake lights go off except for top brake light on 99 jeep grand cherokee laredo...


i take it the brake lights work ok when the lights are not on??? check the ground going to the lights

Jan 04, 2009 | 1999 Jeep Grand Cherokee

3 Answers

MY BRAKE LIGHTS ON MY 1996 JEEP CHEROKEE LARADEO DON'T WORK, WHY


Hi, there should be a microswitch behind the brake pedal,it works the lights each time the pedal is depressed, it may need adjusting or replacing,or it may have come off its mount.

Dec 16, 2008 | 1993 Jeep Grand Cherokee

2 Answers

Lights


hmm interesting have you done any wiring to the lights at all?

Dec 13, 2008 | 2004 Jeep Grand Cherokee

Not finding what you are looking for?
2004 Jeep Grand Cherokee Logo

252 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...