Question about 2005 Pontiac Montana SV6
The message on the radio is please wait and there is no sound of movement
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: MY 2005 PONTIAC G6 6
yeah dude that happened to me, i put subs in my 05 g6, it supposedly happens when the battery dies or u undo the batter, so i took it too a dealership and they tried making me pay $30 for them to tell me it doesn't work so being the angry person i gave them a few choice words and got out of the nice 30 bucks but they will make u pay for a new stock system for a nice $350 bucks which i told them to go screw themselves and i put the dash kit in so i could read the mpg temp and all that and just put a dvd player in it was better and looks better. and to get ur discs out u pull the stock system out get a screw driver and pliers and start taking the junk apart to get them
Posted on Oct 08, 2008
Hi you can try looking on ebay, i have used this method a few times its simple and cheap, or the dealer can get it for you, you just need the seriel number, Hope this helps
Posted on Dec 04, 2008
If the 2005 Montana is similar to the 2001 Montana, I have a solution. First you'll need a hexagonal wrench (the 6-sided L-shaped wrench). The tail light assembly is held on by two screws. You'll need the hexagonal wrench to remove them, because a normal screwdriver won't do it. I also had to use a conventional adjustable wrench to get the leverage to turn the hexagonal wrench, because the screws were in there pretty tight. Once you remove the two screws, the whole tail light assembly should come off. Mine required a little force and I had to play with it a bit, but it came off without a lot of work. There will be one set of wires that connects the tail light assembly to the rest of the minivan--try not to damage that set of wires. Once you get the tail light assembly off, you'll have to take apart the assembly that actually holds the lights. No tools should be required. It's held on by four plastic catches. Just undo the catches (easier said than done, but still not too tough) and it comes apart. Then you can pop out the old light and pop in the new light. Then re-assemble. For me, it went back together much easier than it came apart.
Posted on Jan 03, 2009
For the sliding doors you need to clean the contacts, there are 6 or 8 on both sides, just wipe them clean as they are probably covered in oil/grease/grime.
Posted on Feb 14, 2009
did you pull the radio out? it might just be a loose wire or something simple.. the car is 10 years old stuff becomes loose
Posted on Mar 27, 2009
Tips for a great answer:
Aug 17, 2016 | Pontiac Cars & Trucks
Jan 16, 2016 | 2006 Pontiac Montana SV6
Oct 02, 2014 | 2000 Pontiac Montana
Jan 30, 2014 | Cars & Trucks
Nov 24, 2013 | 2005 Pontiac Montana SV6
Dec 27, 2017 | 2005 Pontiac Montana
Nov 05, 2009 | 2006 Pontiac Montana SV6
Jan 09, 2009 | 1989 Pontiac Sunbird
92 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: