Question about Ford Taurus

Open Question

My front seat on ford taurus wont move. Can someone break a front seat motor if they push back on it while moving it? What can I do to fix it. I already took the seat out. No loose wires and power is

I cant get the driver seat to move on driver's side ford sel 2005. I dissembled the seat and checked to see if power can go through. No loose wires. I took it in to get a repair on my bumper and a young man cleaned the car. He moved the seat back, now it doesnt do a thing. Can someone break a motor by pushing back on it while running the seat motor?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76846 Answers

SOURCE: power front seat won't go back and forth

U will have to replace the entire power seat transmission, there is no other way to get the part, I know it sucks but that is the way it is, try finding a used unit, or swap the passenger side to the drivers side.

Posted on Dec 29, 2008

Ad
ewashmidas
  • 362 Answers

SOURCE: I have a 2005 Ford Taurus SEL with code 42 flashes

It is a air bag code. If the light is on the air bags will not work in an accident, you need to have it repaired.

Posted on Mar 07, 2009

MNfisherman
  • 11896 Answers

SOURCE: driver's side front seat won't move

It is likely the gear on the motor came off track with the seat. The seat will have to be removed and bottom panel disassembled.

Posted on Jul 06, 2009

  • 1 Answer

SOURCE: Driver's seat unable to move forward or backward

There are plastic gears connecting the track to the seat assembly. Whne one of these strip the seat will only work or move to one side. Infiniti does not sell a simple fix. You are looking at buying an entire seat assembly complete with the module for all the electronics. It will be at a cost of around $950 - $1000. Once that is in, Infiniti must program the seat to the brain of the car, only then can you reset your memory settings.

Posted on Oct 02, 2009

harley9701ha
  • 424 Answers

SOURCE: Power Seat Control does not move the seat front or back

Try tapping the power seat frame with a hammer to unbind the motor .

Posted on Nov 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 Ford Taurus GL and none of the power windows work. two front ones sound like the motor is turning but nothing happens. back two don't make any sound. Fuses are ok Any ideas?


ford use cables to move the windows and they have a habit of breaking
you will have to remove the door panels and to an inspection

Apr 06, 2017 | Ford Cars & Trucks

1 Answer

1997 Sable Driver Seat Only Moves 2 Inches At A Time


Could be the switch, but it sounds like the motor is going bad. However, I dont know if you tried to lubricating the tracs. Some of these seats are on ball bearings and some on nylon bushings, either way they need to be lubricated once in a great while. Have you tried to help the seat to move by pushing in the direction it is going to see if it speeds up. If so, the seat motor is going out or the tracks are binding up. I hope this helps.

Apr 02, 2013 | Ford Taurus Cars & Trucks

1 Answer

I moved the seat forward and now it wont move back


look in the track that the seat moves on and make sure nothing is in its way

Mar 01, 2013 | 2003 Ford Explorer

1 Answer

My 1997 ford taurus wont shift out of park. The shifter seams to be stuck, it wont move. The shifter is on the steering wheel not the floor.


This is often a switch located on the brake pedal lever. The car requires you to press the Brake pedal before shiftting out of Park. You lose the signal when a foot hits or breaks this part. Look under the dash for the part and fix it.

Dec 17, 2012 | 1997 Ford Taurus

1 Answer

How to fix the power seat


It could either be the fuse, the power seat switch, or the motor that moves the seat.

May 21, 2012 | 2008 Ford Taurus SEL

1 Answer

Driver seat will move foward but will do all other position


will or wont move foward?
you can get to the wiring block under seat. isolate wiring from motor 1 of three, (middle motor- foward back, front motor - front seat base up / down, back motor - back seat base up /down) does it work of mem. buttons? or when u lean seat foward (entry assist).

Mar 24, 2011 | 2000 Mercedes-Benz CLK

1 Answer

Power Seat Control does not move the seat front or back


Try tapping the power seat frame with a hammer to unbind the motor .

Nov 08, 2009 | 2003 Ford Expedition

2 Answers

My front seat will not move forward. It will recline, move up and down but it will not move forward. I've tried reseting the seat positions but nothing seems to work. my seat wont move forward is there a...


You can move the drivers seat back by turning on the power, getting in the seat and position your feet firmly on the fron flor with your back firmly against he seatback, and then engage the switch pushing back - while pushing like hell with your feet. You can actually hear the seat drive shaft turning while the seat moves back. The principle should be the same for moving forward, but pressure would have to be aplide to the back of the seat.

Jun 02, 2009 | 2004 GMC Envoy

2 Answers

My right subframe would go up when gas is pushed and it shifted hard and i just got a rebuild trns done i changed bot front and back motor mount it helped a lil but my subframe still moves up when i put it...


1. subframe mounts.
2. subframe bolts or nut welded to body broken
3. Body rotted out.
Ford has a bulliten and a retrofit kit to fix this issue.Its a pain in the *** you need to pull up the carpet and drill holes and stuff, I did one way back in the day. Took like 2-3 hours but fixed it. I live in minnesota the road salt eats cars up something fierce!!

Apr 24, 2009 | 1996 Ford Taurus

1 Answer

Power Seat does not work on Expedition.


Have the same issue with mine. My solution was to take the seat out, real easy. And clean the entire motorized system with some MAF/electronic cleaner. From time to time I still have to play with knob a couple of times. My issue is the knob not motor. Not sure what the noise is. This could be the motor. Ensure you don't have any unknown obstructions blocking the motion.

Apr 19, 2009 | 1998 Ford Expedition

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...