Question about 2003 Hyundai Tiburon

1 Answer

Bulb wont come out of fitting

I have a Gen 3 Hyundai Coupe I have removed the fog light bulb from the fitting under then car, how do you remove the fog light bulb from the plastic fitting to put a new one in? any help would be appreciated Richie richiehamilton@hotmail.com

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 776 Answers

Do you have a NEW bulb? The bulb assy 'twists' out (counterclockwise) and a new bulb 'twists' in (clockwise). Each bulb has a connector to it. Remove the connector, twist out the old bulb, twist in the new one, and reconnect the connector.bulb wont come out of fitting - 25d2850.jpg

Posted on Jun 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do you replace a fog light bulb on a 2005 hyundai tuscon"?


undo the hatch back {life the tail up as if you were wanting to gain access to the boot ..you will notice on either side both lighting clusters .depending on what side needs replacing .all you have to do it use a size 2 Philips screw driver to remove the black screws holding in the lighting clusters the locate the broken lamp{bulb} then twist the holder half a turn then replace the lamp {bulb} and then refit the cluster ..PLEASE note when you remove the screws you will have to gently ease the lighting cluster away from the body of the vehicle as if you try to rip it of you will damage it .there are two lugs that slide in to the bodywork of the car .make sure that you take a little time to locate them and check that the lighting cluster fits nicely to the vehicle before you replace the screws ..its worth trying the replacement lamp/bulb before you replace the screws ..just in case you have replaced a fault one with a faulty one !!! it can happen .

Jan 04, 2011 | 2005 Hyundai Tucson

1 Answer

How to replace a 2006 hyundai sonata fog light bulb?


On the bottom side of the car under the fog light area there will be an inspection cover. it is held in place by two plastic trim clips. they will have what looks like a philips head on the screw. remove both of these then pull out the retainer (they are set up like a dry wall anchor). pull back the cover and unplug the bulb. twist the bulb counter clock wise to remove. install in reverse order.
Good luck!! EJ

Nov 04, 2010 | 2006 Hyundai Sonata

1 Answer

How do you change the front fog light bulb on a 335d se?


the bulb just twists out of the fog light .Twist it counter clockwise to remove and clockwise to install the connector should just pull off.

Feb 27, 2010 | 2007 BMW 335i Coupe

2 Answers

How do you replace the fog light bulbs on a 2007 hyundai sonata


Look under the bumper and you will see two large phillips head screws right in front of the wheels. Take these two screws out and bend/move the plastice piece out of the way. Now you can easily get to the bulb. There is a cap that twists off that protects the wires and back of the bulb. Twist this off and then remove the plug portion from the back of the bulb. The bulb then turns 1/4 to 1/2 revolution to loosen and remove. Reverse steps for installation.

Dec 19, 2009 | 2007 Hyundai Sonata Limited Sedan

1 Answer

What is the best way to replace a fog lamp bulb on a 2008 Santa Fe?


1. Turn tires away from car
2. There is a plastic covering in front of the wheel that usually goes around the wheel well. There are plastic thumb pins on the outer edges of this plastic covering. Remove the thumb pins and this plastic piece will come off.
3. Behind this you will find access to your fog lights.
4. Then you can remove the fog light by twisting the plastic cover (if it has one) or by twisting the bulb

Nov 10, 2009 | 2007 Hyundai Santa Fe Limited

1 Answer

How do I replace fog lights on my 2002 Hyundai Santa Fe?


Look up into the bumper and see if you can access the fog light. The bulb should just twist out of the back. If not, the assembly should either pop forward or back to come out. I've heard though, that many santa fe's require the removal of the entire front bumper fascia just to get to the bulbs in which case you'd have to remove your headlights to get to the screws holding the bumper fascia on

Sep 09, 2009 | 2002 Hyundai Santa Fe

1 Answer

My 2007 Sante Fe fog lamp bulb went out and I wasn't able to


Step:
1. Turn tires away from vehicle
2. There is a plastic covering in front of the wheel that usually goes around the wheel well. There are plastic thumb pins on the outer edges of this plastic covering. Remove the thumb pins and this plastic piece will come off.
3. Behind this you will find access to your fog lights.
4. Remove/Replace just like an ordinary head light.

Jul 17, 2009 | Hyundai Santa Fe Cars & Trucks

1 Answer

Fog lamp replacement on 2008 elantra


1. Disconnect the negative (-) battery terminal. 2. Remove the front side cover screw. 3. Remove the front fog lamp assembly connector (A).

38eda8f.gif 4. Remove the front fog lamp bulb (A).

20279ba.gif

Jun 20, 2009 | 2008 Hyundai Elantra

1 Answer

2007 Hyundai Santa Fe - Replacing fog light


hi have not had pleasure of this on santa fe yet? but will try to help dependant of which side o/s or n/s ? i would first remove the screws holding the front of the under engine plastic cover/shield and drop down sufficient to gain view/access? to the rear of fog lamp then if a cover is on? try turning anti clock to remove? or if rubber cover pull off? then the bulb and clip should be visible? unplug the wire from bulb then the spring clip holding bulb in place normally just sring the 2x top ends together and swing down/clear to remove bulb? refit new bulb correctly! pay attention to position old bulb positioned? then clip securely and re connect wire at this stage it would be best to ensure bulb works ?? before you re assemble all else? wish you luck and hope this helps with your problem ?

Oct 28, 2008 | 2007 Hyundai Santa Fe Limited

2 Answers

Changing fog light bulb


I just replaced the fog light bulb on my 2008 Azera. I went under the car and removed two screws from the protective shield. I pulled down the shield and reached up and turned the fog light socket and pulled it out of the housing, remembering which side the wires were on and removed the old bulb (Don't touch the new bulb with your hand) and replaced it with the new bulb. The job took less then 15 minutes

Aug 08, 2008 | 2002 Hyundai Santa Fe

Not finding what you are looking for?
2003 Hyundai Tiburon Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...