Question about 2000 Chevrolet Silverado 2500

1 Answer

Truck wont start...

My truck would take a few cranks then turn on...then just the other night it did not even crank at all and the key just turns without anything starting up, I had my starter rebuilt last night and installed it...when we went to start the car it cranked but did not start, then we tried again and it did the same thing as before it did not crank or do anything

Posted by on

  • Chris Kieninger
    Chris Kieninger May 11, 2010

    have you checked your battery and cables?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 255 Answers

Have battery load tested at local parts store ( it will
need to be fully charged )


hope2help shack

Posted on Apr 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why car wont crank, but can smell gas


IT IS LOOKS LIKE A FUEL PRESSURE LEAKING INSIDE THE ENGINE OR DEFECTIVE FUEL INJECTOR LEAKING . TRY DISCONNECTING THE FUEL PUMP RELAY. AND CRANK THE ENGINE IF ALWAYS CRANK WITH OUT OF FUEL (CRANK WITHOUT START) YOU HAVE FUEL LEAK INSIDE THE ENGINE
REMOVE THE INJECTORS RAIL UP EVERYTHING CONNECTED,PUT BACK THE FUEL PUMP RELAY TURN THE SWITCH ON AND FIND WICH ONE IS LEAKING. (GASOLINE IS FLAMMABLE TAKE CARE)

Nov 06, 2017 | 1999 Dodge Durango

2 Answers

Truck wont start


It could be the fender mounted starter relay under the hood. Or if you took off the small wire at that relay (its from the ignition switch), it should have voltage when the key is held in start. If it does have power in start, probably the relay. If no power in start, either the switch or the neutral safety switch is acting up.

Jan 24, 2014 | 1985 Ford F150

1 Answer

Truck cranks and cranks but wont start


check and see if the gas is getting to the carb, maybe a bad fuel pump. open gas cap and listen for the pump as someone else turns on the key.should hear the pump run a few seconds.

Nov 18, 2013 | Cars & Trucks

1 Answer

Truck wont start


sounds like the tumblers are worn out get a new or used ignition switch and replace.

Feb 17, 2013 | 2001 Chevrolet Silverado 2500

1 Answer

Truck will crank but it won't fire.


My guess would be the key switch.

Jul 08, 2012 | 1997 Chevrolet S-10 Pickup

1 Answer

Car wont start up right away


Crank or cam sensor probably as plugs bad plugs would start but miss the sensor will either give a start or no start condition and on 1 truck the crank sensor went out and it would run cold but miss like crazy when warm,I work in a chyrsler shop and have never seen that happen and even a scan tool didn't pick it up.

Mar 09, 2009 | 1998 Jeep Cherokee

1 Answer

1999 Chevy S10 cranks but wont start


A very common problem on the 99 S10 is a leaky fuel pressure regulator in the intake plenum.What happens is when the truck sits for a few hours or more the regulator leaks all of the fuel in the fuel injection system into the intake air plenum. This does 2 things, 1 it has no fuel pressure when starting and 2 it floods the air intake with raw fuel. Sometimes if you turn the key on wait 3 seconds then turn key off then turn key back on and just turn key to crank starter for a split second and wait 3 seconds.do this 3 times to repressurize fuel system then crank to start(you will hear fuel pump buzz each time you do this.also you may have leaky fuel injectors. Try to crank engine with the gas pedel to the floor. This will tell the computer to stop spraying fuel trhough the injectors and it will start. Joe ASE Master Tech

Mar 04, 2009 | 1999 Chevrolet S-10 Pickup

Not finding what you are looking for?
Cars & Trucks Logo

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...