Question about 1990 Lexus LS 400

1 Answer

I have a part that is hanging down under the car. Someone said it my b the aframe. Im looking for a free on line manual so i can see the part and know what to do next.

I have a part that looks like the aframe hanging from my car. i am looking for a manual that would let me look thru the parts of the frontend so i can tell what it is and what to do

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 103 Answers

Can you take a picture of the part and email it to me?

Posted on Apr 18, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Fuel line diagram

Check carcoal canister and also look for fuel leaks.

Aug 30, 2014 | Cars & Trucks

1 Answer

1997 lincoln continental box under trunk with 2 metal lines going to the front of the car it was hanging down and dragging on the road.

Have a repair shop tell you or look under a similar car

Lot under there to know what your looking at & guess to give
you the answer

Feb 02, 2013 | 1997 Lincoln Continental

1 Answer

Im looking for a 1993 toyota corolla free manuel to download. where can i get one?

check your owners manual. should tell you. the manual youd get from someone might not be the same for your car as they have different options so you could get one for a 6 cyl while you have a 4, or vice versa. also i just posted on a different version of your question of how to check this by looking at spark plug wires under the hood.

Oct 26, 2012 | 1993 Toyota Corolla

1 Answer

Im losing brake fluid in my resivor as fast as i put it in what could be the problem? its a 1999 kia sportage

well, if fluid is going down. then you have a leak. either in the brake lines or a bad wheel cylinder. if you can not see the leak. have someone push on brake while you look under the car. if the lines you will see it spray out. but if you do not see anything check for brake fluid on the inside of back wheels if it has drum brakes in the back, this means a brake cylinder is bad.

Aug 09, 2011 | 2001 Kia Sportage

2 Answers

I have rusted metal of the undercarriage of a 2002 ford escape xlt on the side where the gas tank is located, this metal started to hang down, and a piece of metal came this safe to drive, until...

Yes it should be OK. Just as long as none if it is touching it rubbing the lines or tank if it is you need to remove the piece that is. This will be ok till you get it into a body shop to fix the problem. Also if the tank is loose dont drive it because the tank might fall out but it is rare but it does happen..

Mar 06, 2011 | 2002 Ford Escape

1 Answer

Im looking for repair manual for 1986 chevy k10 pickup. or at least a diagram of where all the gas lines go has a lot of info on your truck. Just sign up for free account, enter your truck year, model, etc. and look here: .

To answer the question on fuel tank lines, there should be 3. The pressure line goes to the fuel pump, and a return line from the fuel pump. The third line is the evaporation system/vent line. It goes to the evaporation cannister to control gas emissions. Not sure where that is on your truck. The manual doesn't say.

If you have more questions, please let me know.

Oct 18, 2010 | Chevrolet Silverado Cars & Trucks

1 Answer

How to replace cv axels in 1986 pontiac grand am 3.0 litre

much easier to do this on a lift. You have to break the lower ball joint loose (and in some cars the tie rod end too), remove the axel nut, pry the a-frame down with a big pry bar between the aframe and car frame or inner fender skirt. While one person prys a-frame, the other person pulls the hub away from the car to clear the lower ball joint. Pull the axle out of the hub first, then straight out of the tranny. Use a drip pan under the tranny in case it leaks a little. Push the new axle straight into the tranny until it clicks in. put the other end into the hub and have someone pry the a-frame down again while you get the hub back into the ball joint. button her back up...

Sep 04, 2010 | 1986 Pontiac Grand Am

1 Answer

Transmission is stuck in 4 x 4 low

If it is an automatic, check the fluid level. If a manual, climb under it while someone tries to move the transfer case lever. Look for something binding or hanging up

Feb 15, 2010 | 2004 Ford Expedition

1 Answer

Heat and a/c only blows from floor not vents

i have had that problem ,it`s usually one of the AC Vacuum lines is not connected , sometimes they hang down by you feet ,and someone steps on them ,you might half to look under the dash or behind the ac switch on the dash that turns it to Heat or vents etc.......

Dec 23, 2009 | 2000 Chevrolet Express Cargo

Not finding what you are looking for?
1990 Lexus LS 400 Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts


Level 3 Expert

76846 Answers


Level 3 Expert

907 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides