Question about 2005 Suzuki Swift

2 Answers

With an '06 Swift 1.5, Hazard Light Problem

With an '06 Swift 1.5, I have a problem with the hazard lights.

When I turn off the ignition, the hazard lights start blinking. It doesn't happen all the time, but enough to really get on my nerves.

I can't find a link between the various times this has happened.

I took it into the dealership, and they replaced something in/around the relay box under the dash. It was fine for a couple of months, but it has now started doing it again. My battery went flat today because of it. Not much fun when you're parked on a steep hill facing up it.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Hey there, i've found that water leaks from the top drivers side of the windscreen onto the body computer which is located in the fuse box you mentioned and causes corrosion it causes many different faults including yours. if you remove the right hand pillar trim and run a hose over the pillar and windscreen you will most likely see the water run from a seam about 3 quarters of the way up the pillar, seal this seams and either remove the fuse box and clean the plug behind the body computer or replace the complete unit again. i hope this helps regards chris

Posted on Oct 06, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do you fix the problem? Replace windscreen or just replace box? I notice after rain there is water dropping on my foot on acceleration

Posted on Apr 14, 2013

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My left turn signal will not stop blinking while car is running or completely off...please help!!

Hi BJ:

- Hazard lights work when ignition is turned OFF.
- Signal lights Don't work when ignition is turned off.
- Is it possible that the Right signal bulb is burned out?
- I'd be checking the functions of all of the bulbs.
How did this problem start?
Please reply as a COMMENT to this post.

Jan 06, 2016 | 2003 Saturn Lw 4dr Wagon

1 Answer

Turn signal hazard lights work but not running lights

The parking lights should be on a different circuit from turn signals - hazard lights. The bulbs usually have two filaments, one for each circuit.
On most models there is a tail light fuse and relay that handles front and rear parking lights.

Jun 28, 2013 | Toyota Tacoma Cars & Trucks

1 Answer

1988 Trans Am will not start when ignition is turned all the way.

Take a test light to the small wire on the starter and have someone turn it to the start position. If the light lights up and the engine doesn't turn over, I would suspect the starter itself. If the test light doesn't light, try it in neutral and repeat test. If it still doesn't light up, it may be the PRNDL switch or the ignition switch itself.

Sep 22, 2012 | 1988 Pontiac Firebird

1 Answer

I recently replaced the timing belt on my 92 tercel. everything is running fine however my hazard lights blink when ever the key is in the ignition they will blink for awhile stop then continue

Are you saying that the key just has to be in the ignition? Or you need to turn the key before it

Most likely, there is a problem with the switch that you push to turn on the hazard lights.
Either the switch itself is damaged and somethings loose inside it which is making the
hazard lights come on and off randomly, or the wires going to the switch are making contact
with each other.

Remove the switch and see if the button feels loose, and check the wires going to the switch.
To remove it you need to detach the plastic piece that covers above an below the gauges that the switch is housed inside. There are 2 phillips screws that hold it on on top. And pull off the knob
that you use to to dim and brighten the lights on the gauge cluster. Remove the nut under that knob. Then you can pull the plastic cover away and detach the switch. Then check the wires and switch.

If you needed to get another switch you would probably need to get it from a Toyota dealer or
from a wrecking yard. i would get it from the wrecking yard if there are any in you area.

Or the turn signal/hazard flasher may be malfunctioning. The same flasher is used by the turn
signal and hazard lights. Maybe the components in the flasher that control the hazard lights are
not working right. So you could try changing that if you wanted to. Its located somewhere in
the relay center under the hood or near one of the fuse panels.

Are the turn signals working correctly?

And its just coincidence, chaging the timing belt has nothing to do with it.
I drive a 92 Tercel too. But ive never had a problem like this.

Jul 14, 2011 | 1992 Toyota Tercel

2 Answers

The Right Turn Signal comes on, but doesn't blink on my 95 Buick Park Ave. I have a State Inspection coming up and need to get it fixed by this weekend.

It sounds like one of the signal lights is out. The best way to find out is to turn the hazards on and check if they blink. If they do then you might need a turn signal relay.

Good Luck

May 11, 2011 | 1995 Buick Park Avenue

1 Answer

1992 Ford Ranger Turn signal/Hazard light issue

Can you just check to make sure the ignition key switch is not staying over to far and not backing off when you try to start it. I had a truck that did that and it messed up my turn signals until I brought the key switch back a little after starting it. Just a simple idea. Be kind with your rating for me. Raz

Apr 19, 2010 | 1992 Ford Ranger

2 Answers

Turn signal doesn't come on until I hit my hazard light on & off

it could be duel filament bulb that is blown and shorting inside the bulb to the other circuit, you may need to remove all indicator and hazard bulbs and check. I would also try a new flasher can

Apr 17, 2010 | 2003 Chevrolet Impala

1 Answer

94 Camry Wagon ignition blocked, doors self-lock, flashers on

you may have had a bad connection at the battery that would cause this kind of problem

Dec 14, 2008 | 1994 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

836 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides