Question about 1992 Acura Integra Hatchback

1 Answer

Oil light comes on after oil change 1992 acura integra.

I don't see a reset button under dash as some have suggested. Is it in plain sight? Or will disconnecting the battery do the trick?

Posted by on

  • 6 more comments 
  • jannino Apr 17, 2009

    I dont have the manual thats why i am here

  • jannino Apr 17, 2009

    Its just the oil lamp and it only flashes after 20mins of drving. If I push hard on the brakes it will steady the light for a minute then flash again.

  • jannino Apr 17, 2009

    at $72.00 an hour I will keep looking online

  • yadayada
    yadayada May 11, 2010

    You may be able to buy a used owners manual here, also try ebay.

    http://ebiz.netopia.com/jbmanuals

  • yadayada
    yadayada May 11, 2010

    that's cheap for the dealer, we charge $125.00

    try justask.com

  • yadayada
    yadayada May 11, 2010

    consult the dealer.

  • yankstorm02
    yankstorm02 May 11, 2010

    Is the oil pressure warning light on or is it a maintenance reminder light?

  • yadayada
    yadayada May 11, 2010

    the reset procedure is in the owners manual.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 145 Answers

If the oil lamp itself is illuminating it is not a maintenance light that can be reset the oil pressure sending unit is detecring low oil pressure. You should have the vehicle serviced right away. The reset procedure for the maintenance indicator is as follows,with the key off depress & hold the odometer/trip button on the instrument panel turn key to run position wait 10 seconds for reset

Posted on Apr 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1992 honda integra horn fuse blows after applying brakes


Honda makes the Integra but it uses the Acura name in the US.
According to the wiring diagram the brake lights and horn are on the same circuit. So I would check the bulbs and sockets for a short.
The brake light switch also involves the cruise control system.

Sep 21, 2012 | Cars & Trucks

1 Answer

Reset oil lamp acura integra 1992 gs


Turn the key to the "on" position, not start, step on the gas pedal 3 times, turn key tp off and then start the car. This works on most cars for the oil change light. If it is the oil pressure light get in for service very soon. Low pressure can kill your engine.

May 06, 2012 | 1992 Acura Integra Hatchback

1 Answer

Bought use car and changed oil and cant seemed to


It's a little button above your right knee. Try turning the ignition on (without starting it)... then press the button for about 5 secs... then start it. Should be out then.

May 06, 2010 | 1994 Acura Integra

2 Answers

Maintainance required light flashes 10 times before starting car


take it to your local repair shop and have it checked for codes

Apr 15, 2010 | 1994 Acura Integra

1 Answer

HOW TO RESET MAINTENANCE LIGHTS ON 2000 ACURA INTEGRA?


When you turn the ignition on, and the maintenance light comes on, reach under the dash on the right side and press the button for about 10 seconds. The light will go off...

1ed05fd.jpg

I hope helped with this (remember rated this help) Good luck.

Dec 07, 2009 | 2000 Acura Integra

3 Answers

No spark and no fuel 1992 acura integra. jumped fuel pump still no fuel


I don't know what happened but i kept trying it and the car started i guess it's not the fuel pump I'm going to change the fuel filter tomorrow

Oct 09, 2009 | 1992 Acura Integra Hatchback

2 Answers

Honda Integra Headlights


you can use acura integra lights for your honda integra no mater which side is the wheel.

May 17, 2009 | 1992 Acura Integra Hatchback

1 Answer

92 acura integra s3 dash light constantly blinking


that shop should be responsible. but you can reset by taking negative battery wire off for few minutes. u can also get a book for that car cheap and read through. make sure no other wires disconnected

Apr 24, 2009 | 1999 Acura Integra

1 Answer

2000 Acura RL and 2000 Acura Integra GS ABS light on


The SRS computer needs to be reset, if you dont have a repair manual i would first suggest finding one for each car. The basic principal is that you jumper the diagnostic plug (under the glove box in the RL). The next step I believe is that you must depress the TCS button, then while holding it down you turn the key to on, continue to hold the TCS button for 15 sec and then let off. The check engine light should then blink really quick a few times and that means its reset. Im reciting this from memory so dont quote me on it. I have done it before for the RL but not the integra, id really suggest finding a repair manual though.

Jan 04, 2009 | 2000 Acura 3.5RL

Not finding what you are looking for?
1992 Acura Integra Hatchback Logo

547 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...