Question about 1998 Dodge Intrepid

1 Answer

CODES NUMBER 1 INJECTOR CIRCUIT OPEN.1998 DODGE INTREPID 2.7

REPLACED ALL INJECTORS AND PLUGS AND CHECKED OMS AT 7 OR SO EACH AND STILL RUNS BAD AND NUMBER 1 INJECTOR IS STILL CODING....ANY THING YOU CAN THINK OF...THIS IS DRIVING ME CRAZY...

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 323 Answers

The ground wire from the injector to the pcm is open. The injectors share the same power wire but the pcm grounds each one individually to fire.

Posted on Apr 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

2000 Jeep Grand Cherokee Laredo 4.7 liter code reads p0307 turn the car off when I turn it back on started misfiring and sputtering and wont stay started now help


code p 0307 is misfiring on no 7 cylinder ====causes --- engine mechanical fault ---wiring---ignition/ fuel system--injector --ECT/MAF sensor---ECM
look for low fuel pressure or ignition control module

May 31, 2016 | 2000 Jeep Grand Cherokee Laredo

1 Answer

Code p0201 on in dodge intrepid 2001 steady not blinking


P0201 Injector Circuit Open Cylinder 1

replace your fuel injector

Jan 14, 2013 | 2001 Dodge Intrepid

1 Answer

How do ya fix codes p0320&p0340


Ford Crown Victoria, Mercury Grand Marquis, Marauder, Lincoln Town Car 1999-2005
4.6L V8 - Auto 2

Print


Trouble Code: P0201

Cylinder 1 Injector Circuit Malfunction

Possible Causes:


Injector 1 connector is damaged, open or shortedInjector 1 control circuit is open, shorted to ground or to powerPCM has failed (the injector driver circuit may be damaged)


Trouble Code: P0202

Cylinder 2 Injector Circuit Malfunction

Possible Causes:


Injector 2 connector is damaged, open or shortedInjector 2 control circuit is open, shorted to ground or to powerPCM has failed (the injector driver circuit may be damaged)


Trouble Code: P0203

Cylinder 3 Injector Circuit Malfunction

Possible Causes:


Injector 3 connector is damaged, open or shortedInjector 3 control circuit is open, shorted to ground or to powerPCM has failed (the injector driver circuit may be damaged)


Trouble Code: P0204

Cylinder 4 Injector Circuit Malfunction

Possible Causes:


Injector 4 connector is damaged, open or shortedInjector 4 control circuit is open, shorted to ground or to powerPCM has failed (the injector driver circuit may be damaged)


Trouble Code: P0205

Cylinder 5 Injector Circuit Malfunction

Possible Causes:


Injector 5 connector is damaged, open or shortedInjector 5 control circuit is open, shorted to ground or to powerPCM has failed (the injector driver circuit may be damaged)


Trouble Code: P0206

Cylinder 6 Injector Circuit Malfunction

Possible Causes:


Injector 6 connector is damaged, open or shortedInjector 6 control circuit is open, shorted to ground or to powerPCM has failed (the injector driver circuit may be damaged)


Trouble Code: P0207

Cylinder 7 Injector Circuit Malfunction

Possible Causes:


Injector 7 connector is damaged, open or shortedInjector 7 control circuit is open, shorted to ground or to powerPCM has failed (the injector driver circuit may be damaged)


Trouble Code: P0208

Cylinder 8 Injector Circuit Malfunction

Possible Causes:


Injector 8 connector is damaged, open or shortedInjector 8 control circuit is open, shorted to ground or to powerPCM has failed (the injector driver circuit may be damaged)


Trouble Code: P0219

Engine Over-Speed Condition

Possible Causes:


Engine operated in the wrong transmission gear positionExcessive engine speed with gear selector in Neutral positionWheel slippage due to wet, muddy or snowing conditions


Trouble Code: P0230

Fuel Pump Primary Circuit Malfunction

Possible Causes:


FP or FSV circuit is open or shortedFuel pump relay VPWR circuit openFuel pump relay is damaged or has failedPCM has failed


Trouble Code: P0231

Fuel Pump Primary Circuit Low Input

Possible Causes:


FP or FSV circuit is open or shorted to groundFuel pump relay VPWR circuit open or fuel pump relay failedPCM has failed


Trouble Code: P0232

Fuel Pump Secondary Circuit High Input

Possible Causes:


Fuel pump relay contacts always closedFuel pump ground circuit has high resistanceFuel pump secondary circuit is shorted to powerLow speed fuel pump relay damaged or related circuit problem


Trouble Code: P0297

Vehicle Over-Speed Condition

Possible Causes:


The code indicates the vehicle was driven at very high engine speed (rpm) for too long. The PCM temporarily prohibits high engine speed by disabling the fuel injectors with this code set.


Trouble Code: P0300

Random Misfire Detected

Possible Causes:


Base engine mechanical fault that affects two or more cylindersFuel metering fault that affects two or more cylindersFuel pressure too low or too high, fuel supply contaminatedEVAP system problem or the EVAP canister is fuel saturatedEGR valve is stuck open or the PCV system has a vacuum leakIgnition system fault (coil, plug) affecting two or more cylindersMAF sensor contamination (it can cause a very lean condition)Vehicle driven while very low on fuel (less than 1/8 of a tank)TSB 03-14-4 contains repair help for this code for COP ignition


Trouble Code: P0301

Cylinder Number 1 Misfire Detected

Possible Causes:


Air leak in the intake manifold, or in the EGR or PCM systemBase engine mechanical problem that affects only Cylinder 1Fuel delivery component problem that affects only Cylinder 1 (i.e., a contaminated, dirty or sticking fuel injector)Ignition system problem (coil, plug) that affects only Cylinder 1TSB 02-16-2 contains repair help for this code (LS & T-Bird)TSB 03-14-4 contains repair help for this code for COP ignition


Trouble Code: P0302

Cylinder Number 2 Misfire Detected

Possible Causes:


Air leak in the intake manifold, or in the EGR or PCM systemBase engine mechanical problem that affects only Cylinder 2Fuel delivery component problem that affects only Cylinder 2 (i.e., a contaminated, dirty or sticking fuel injector)Ignition system problem (coil, plug) that affects only Cylinder 2TSB 02-16-2 contains repair help for this code (LS & T-Bird)TSB 03-14-4 contains repair help for this code for COP ignition


Trouble Code: P0303

Cylinder Number 3 Misfire Detected

Possible Causes:


Air leak in the intake manifold, or in the EGR or PCM systemBase engine mechanical problem that affects only Cylinder 3Fuel delivery component problem that affects only Cylinder 3 (i.e., a contaminated, dirty or sticking fuel injector)Ignition system problem (coil, plug) that affects only Cylinder 3TSB 02-16-2 contains repair help for this code (LS & T-Bird)TSB 03-14-4 contains repair help for this code for COP ignition


Trouble Code: P0304

Cylinder Number 4 Misfire Detected

Possible Causes:


Air leak in the intake manifold, or in the EGR or PCM systemBase engine mechanical problem that affects only Cylinder 4Fuel delivery component problem that affects only Cylinder 4 (i.e., a contaminated, dirty or sticking fuel injector)Ignition system problem (coil, plug) that affects only Cylinder 4TSB 02-16-2 contains repair help for this code (LS & T-Bird)TSB 03-14-4 contains repair help for this code for COP ignition


Trouble Code: P0305

Cylinder Number 5 Misfire Detected

Possible Causes:


Air leak in the intake manifold, or in the EGR or PCM systemBase engine mechanical problem that affects only Cylinder 5Fuel delivery component problem that affects only Cylinder 5 (i.e., a contaminated, dirty or sticking fuel injector)Ignition system problem (coil, plug) that affects only Cylinder 5TSB 02-16-2 contains repair help for this code (LS & T-Bird)TSB 03-14-4 contains repair help for this code for COP ignition


Trouble Code: P0306

Cylinder Number 6 Misfire Detected

Possible Causes:


Air leak in the intake manifold, or in the EGR or PCM systemBase engine mechanical problem that affects only Cylinder 6Fuel delivery component problem that affects only Cylinder 6 (i.e., a contaminated, dirty or sticking fuel injector)Ignition system problem (coil, plug) that affects only Cylinder 6TSB 02-16-2 contains repair help for this code (LS & T-Bird)TSB 03-14-4 contains repair help for this code for COP ignition


Trouble Code: P0307

Cylinder Number 7 Misfire Detected

Possible Causes:


Air leak in the intake manifold, or in the EGR or PCM systemBase engine mechanical problem that affects only Cylinder 7Fuel delivery component problem that affects only Cylinder 7 (i.e., a contaminated, dirty or sticking fuel injector)Ignition system problem (coil, plug) that affects only Cylinder 7TSB 02-16-2 contains repair help for this code (LS & T-Bird)TSB 03-14-4 contains repair help for this code for COP ignition


Trouble Code: P0308

Cylinder Number 8 Misfire Detected

Possible Causes:


Air leak in the intake manifold, or in the EGR or PCM systemBase engine mechanical problem that affects only Cylinder 8Fuel delivery component problem that affects only Cylinder 8 (i.e., a contaminated, dirty or sticking fuel injector)Ignition system problem (coil, plug) that affects only Cylinder 8TSB 02-16-2 contains repair help for this code (LS & T-Bird)TSB 03-14-4 contains repair help for this code for COP ignition


Trouble Code: P0315

Unable to Learn Crankshaft Variation

Possible Causes:


Inspect the CKP sensor for damageInspect the CKP sensor for debris on the rotorInspect the crankshaft pulse wheel for damaged teethInspect the crankshaft pulse wheel for wobble (loose condition)


Trouble Code: P0316

Misfire in the First 1000 Revolutions

Possible Causes:


Check for CMC DTC P0136, P0156, P0171, P0172, P0175, P1130 and P1150. Repair these adaptive fuel and HO2S codesCheck for any other CMC in memory. Repair these codes first!Ignore P1000 codes that set during KOEO and KOER Self-Test


Trouble Code: P0320

Ignition Engine Speed Input Circuit Malfunction

Possible Causes:


Inspect for problems with an Aftermarket 2-way radioInspect for signs of "arcing" at one or more of the ignition coilsInspect the Profile Ignition Pickup (PIP) unit inside distributor (check for damage or corrosion at the PIP sensor connector)PIP sensor is damaged or it has failed (distributor models)Ignition control module (ICM) has failed (Distributorless models)Trouble Code: P0340

Camshaft Position Sensor Circuit Malfunction

Possible Causes:


CMP sensor circuit is open or shorted to groundCMP sensor circuit is shorted to powerCMP sensor ground (return) circuit is openCMP sensor installation incorrect (Hall-effect type)CMP sensor is damaged or CMP sensor shielding damagedPCM has failedTSB 02-22-1 contains repair information for this trouble code

Nov 16, 2012 | Ford Cars & Trucks

1 Answer

My problem is vehickle code po205


Trouble Code: P0205

Injector 1, 2, 3, 4, 5, or 6 Control
Possible Causes:


ASD relay output circuit failure. Fuel injector has malfunctioned or failed. Fuel injector control circuit is open or shorted to ground. PCM has failed.Here is the code from the Dodge repair guide..

Oct 12, 2012 | 2001 Dodge Intrepid

1 Answer

My 1998 Dodge Intrepid is starting & then stalling only after a few seconds. The engine light came on, & the code was P1391. Any ideas?


That code is indicating an intermittant crank shaft or cam shaft sensor fault. Because the engine is starting then stalling, check to see if you have spark after the stall. If spark is still present, you are probobley looking at a cam sensor circuit issue. The cam sensor controls the fuel injector pulse. If the cam sensor fails on a chrysler product, the fuel injectors will not function.

Nov 25, 2011 | 1998 Dodge Intrepid

1 Answer

1998 DODGE INTREPID 2.7 MISSES


fixed the problem....unhooked wires from pcm to harness at the connector next to fuse box under hood,sprayed with electrical cleaner and then dried with air compressor...rehooked and car is running great....code engine service is also off....

Apr 17, 2009 | 1998 Dodge Intrepid

1 Answer

2000 dodge intrepid engine light on, power loss, rough idle


P0304 Cylinder 4 Misfire Detected P0354 Ignition Coil 4 Control Circuit P0204 Injector 4 Control Circuit You need to check injetror wires an coil wires .If good, The new coil my not be good.The Injector my be bad. If good it the ECM Check all fuses.

Jan 15, 2009 | 2000 Dodge Intrepid

Not finding what you are looking for?
1998 Dodge Intrepid Logo

Related Topics:

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...