Question about 1991 Volvo 940

1 Answer

Reverse lights not working changed bulbs - 1991 Volvo 940

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,986 Answers

On the side of your transmission will be a switch with several wires coming out of it. This is your reverse switch that turns on your reverse lights and most likely needs to be replaced

Posted on Oct 01, 2009

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Can't remove back light to change reverse light bulb.

Sorry I have been out of town. I went to the library and borrowed the Chilton book. I already had it right, but the back light cover was just not being cooperative. After jiggling it a little more, it came off and I was able to change the bulb. I wish they had made it simpler like the old Camry _ where there wasn't so much difficulty getting at the bulbs.

Thank you for checking.

Posted on Apr 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Stuck in park,power windows don't work,reverse lights don't work dash doesn't work. keeps blowing 10 amp fuse for reverse lights.changed brake pedal switch didn't help


of course changing a brake pedal switch will not help in a reversing light problem
they are two totally different circuits
check for a damaged wire at the reverse light switch or bulb holder for the reversing bulbs for a dead short
as for the rest check the IGN fuse under the bonnet

Feb 18, 2016 | 1997 Honda Accord

1 Answer

Reverse lights not working mercedes w202


check switch wire on gearbox, can fall off? or fuse, and bulbs, I have had 2 bulbs go at once? so could be as simple as changing the bulbs

Sep 02, 2014 | Cars & Trucks

1 Answer

Reset reverse light indicator camry


Make sure the tail lights and brake lights are working including the one in the rear window, if any of these are out the dash warning light will stay on, any bulbs that look discolored should be replaced

Mar 16, 2014 | Toyota Camry Cars & Trucks

1 Answer

Only right side reverse light does not work.


There is not any left or right reverse Light switch. It is only one switch for reversing light and it is fitted on the Transmission. If you do have the one working and the other not,first check the bulb if is ok,if not change it. If the bulbs are ok, check for any broken wiring.

May 07, 2013 | 1995 Jeep Grand Cherokee

1 Answer

2009 V50 back up lights are both out. What could it be? Not the fuse or bulb.


if fuse and bulbs are fine then it's your reverse switch that's not working. it is located at the transmission, change it. but before changing you should make sure that the wires are not cut or faulty.

Feb 08, 2013 | Cars & Trucks

1 Answer

After switching the fuse and replacing the bulbs the reverse lights won't work.


if you changed the right fuse then you could have a bad neutral switch not working to turn on the reverse lights or power or ground is lost going to the bulbs either a bad wire or bad sockets this will have to be checked out with a test light.

Dec 07, 2011 | 2002 Pontiac Sunfire

1 Answer

How do I change a brake light bulb in a 1999 c70 volvo?


Welcome to FixYa.com
Brake Lamp Replacement

Location of the lights

Image

The illustration shows the locations of the lights on the RH side. The LH side is the same but

mirror-reversed.

The lights have the following functions:

- 1 +1 = Parking light Fail light

- 2 = Reversing light

- 3 = Fog light LH side only (LHD cars)

- 5 = Direction indicator

- 6 = Brake light

Image

Tail light changing bulbs

Ignition off.

Open the cover in front of the tail light

Undo the wing nut and take out the lamp holder.

Change the defective bulb.

Fit in reverse order.

Check that all bulbs lamps are intact and in working order.

Image

Replacement of tail light cluster

Note! If a new tail light is to be fitted, the sleeves must be ground down 1.5 mm.

Open the cover in front of the tail light Undo the panel partly in front of the tail light Unplug the

connector for the tail light Undo the four nuts securing the tail light see illustration.

Pull the tail light straight out. Fit in reverse order

Note! check the sealing and fit on reassembly.

Check that all bulbs lamps are intact and in working order.Thank you for Using FixYa.comKind Regards, LeeYour FixYa Expert and Master Technician

Jan 27, 2011 | 1999 Volvo C70

1 Answer

My reversing lights dont work how do I change the bulb? Its a Mitsubishi L200


Remove the screws that attach the lense to the truck. Twist the bulb hold from the backside and remove the bulb. Installation is the reverse.

Jun 11, 2008 | 1988 Mitsubishi Pickup

Not finding what you are looking for?
1991 Volvo 940 Logo

Related Topics:

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...