Question about 1995 Oldsmobile Cutlass Supreme

2 Answers

Where is air mass flow sensor on 1995 olds supreme 3.1

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Oldsmobile Master
  • 6,982 Answers

If your car has one, it is located in the large hose (duct) that goes between the air filter and the throttle body. (duct is two seperate parts with sensor body between them)

Posted on Apr 17, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Open the hood and look at the top of the engine. You'll see 3100 stamped on the intake manifold. There is a black, large diameter hose connected to it. You just unscrew the hose clamp, pull the hose off and there you will see the MAFS bolted on with 4 bolts. There will also be a black electrical box that is plugged into the harness. Here is a link of what the part looks like!

http://www.autopartswarehouse.com/shop_parts/air_flow_meter/oldsmobile/cutlass_supreme.html

Posted on Apr 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Grand Am Has P0102


It is not an ECM/PCM problem.
P0102 - Mass or Volume Air Flow Circuit Low Input
Possible causes- Faulty mass air flow sensor
- Dirty mass air flow sensor
- Dirty air filter
- Mass air flow sensor harness is open or shorted
- Mass air flow sensor electrical circuit poor connection
- Intake air leaks Tech notes Before replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with low compress air or mass air flow sensor cleaner. Reset code and drive vehicle. If the code comes back, it may be necessary to replaced the mass air flow sensor

Sep 27, 2012 | 2003 Pontiac Grand Am

2 Answers

Engine quits when automatic transmission shifted into gear


Sounds like the mass air flow sensor. Have the vehicle scanned for codes . Do the repairs the codes indicate and erase codes.

Apr 26, 2010 | 1994 Oldsmobile Cutlass Ciera

1 Answer

My car is dieing out when i give it gas it is a v6


have you checked your mass air flow sensor? i had a 1994 cutlass ceira that did that and I just replaced the mass air flow sensor. but if you cant find a mass air flow sensor just take yours off and spray out the little wires in it with carb cleaner and let it dry.

Jan 10, 2010 | 1994 Oldsmobile Cutlass Supreme

1 Answer

How can i find the mass air flow sensor in a kia


Here's a picture: d776d5b.jpg

It's right on top of the air filter housing.

Sep 09, 2009 | 1995 Kia Sephia

3 Answers

I have a 1995 ford taurus engine stalls when idling and smells of gas when accelerating it bucks. Changed fuel filter, could it be mass air flow sensor?


Start with smaller problems and check the fuel pressure regulator, the mass air flow sensor for these vehicles is pretty pricy. Is the check engine light on? If so, head to your nearest auto zone and have them check for trouble codes. If the check engine light isn't on, its not likely your mass air flow sensor

Jul 09, 2009 | 1995 Ford Taurus

3 Answers

MAF sensor


HI, MAF is located right between the Intake duct assembly and the seal assembly. check the visual aid below to help with the location.

60588ee.jpg

Jun 21, 2009 | 1995 Oldsmobile Cutlass Supreme

1 Answer

1995 ford probe


The mass air flow sensor is right by the airbox.... It has two screws holding it into a body. Unplug it, unscrew it, and take it out of the housing. Its literally in plain view. Take it out and CAREFULLY put the new one in. Make sure not to damage the electrodes on the new mass air flow sensor. It's not even six inches from where you put in the air filter. Intake hose going to the intake manifold.

Jun 10, 2009 | 1995 Ford Probe

Not finding what you are looking for?

Open Questions:

See all 1995 Oldsmobile Cutlass Supreme Questions

1995 Oldsmobile Cutlass Supreme Logo

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...