Question about 2004 Ford F150

1 Answer

96 ford explorer code p0301 mis fire 1

I have a 96 ford explorer 4.o 2wd It started throwing a code misfire 1 We have checked the injector they are good we checked spark plugs they are good replace fuel filter did a compression test was good fuel pressure was good.

Posted by on

  • Anonymous Mar 20, 2014

    also the # 4 cylinder does not seem to be firing but has fire

  • Anonymous Mar 23, 2014

    cylinder 2 misfire no injector pulse width once vehicle is running but the injector does fire while cranking. i have already checked compression and spark to that cylinder and both are good.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 202 Answers

Sounds like either a bad plug wire, or coil pack. This is about all that would cause the misfire.

Posted on Apr 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 ford explorer sport tracs cylinder 1 misfire


The coil-on-plug. These are common to fail. #1 is easy to get to, all you need is a 7mm socket, an extension, and a ratchet. P0301 tells you that cyl.#1 is not firing everytime it is asked to, P0316 means that during the first 1000 revolutions when you start your truck, there was a misfire. To be sure about the coil, swap the coils with the one next to #1. Clear the codes and wait for the codes to return. If the code P030_ shows up, (P0302 if you swapped it with #2, P0303 for #3, for example) Then remove that coil and get you another!

Feb 01, 2012 | 2004 Ford Explorer

3 Answers

I have a 97 Ford Explorer AWD 8 cylinder. Check engine light comes on and I get code p303. Vehicle bucks at times, uses lots of gas. Believe it may be 02 censor, spark plugs and wires tested ok. Any Idea


code says #3 cylinder misfire, check the coil pack for this cylinder to see if its got spark, bad o2 sensor will spit another code, its most likely the coil

Mar 17, 2011 | 1997 Ford Explorer AWD

1 Answer

Engine misfires on #1 cyl. Code P0301. plug, fuel


Then the coil is bad. Even if the specs were ok, which they r not, the cracked case means its junk.

Jan 29, 2010 | 2001 Ford Taurus

1 Answer

P0301


Check obvious first, starting at plug wire, to make sure it's getting spark to plug, then pull plug to see how/if, it appears to be firing. No spark to wire, check coil. If spark is good to plug, and plug firing, time to check if fuel getting there,and if no, could be caused by faulty oxygen sensor, bad injector, just as starters.

Dec 22, 2009 | 2001 Ford Taurus

1 Answer

2001 Cougar getting a P0301 & P0303 error...could this be a leaky intake manifold? Already replaced the plugs & wires. It has 114,000 miles


those codes are for a misfire if you've already replaced the plugs and wires and it still throws the same codes check the coil for those 2 cylinders and make sure it's firing if it is check to make sure the fuel injectors are firing on those 2 cylinders a leaking intake wouldn't cause the misfire codes it would throw like a po171 and or a po174 normally

Nov 11, 2009 | 2001 Mercury Cougar

3 Answers

My check engine light keeps coming on. With a different code each time. I have replaced MAS, EGR Valve, spark plugs, wires and fuel injectors. It feels like it is miss firing. The dealership has no clue,...


I have a 99 mazda B3000 with the 3.0l motor which is the same as the ford Ranger and I Had a misfire and it was caused by the camshaft sensor on the rear of the engine. It is mounted where the distributor should be but these have coil packs. My code was a po1309. If this helps any.

Sep 27, 2009 | 1997 Ford Explorer AWD

1 Answer

Coil pack


153624 is the firing order

Jun 21, 2009 | 1998 Ford Mustang

2 Answers

2001 ford taurus p0301 and p0303


You are mis fireing on cyl 1 and 3 if you replaced plugs and wires and coil this is going to be a fuel injector issue or valve issue. See if you can swap the injectors with known good cyl. and see if it changes. Or have a shop do a fuel injector service on it to see if it helps. It may be to late for the fuel injector service.

Mar 01, 2009 | 2001 Ford Taurus

Not finding what you are looking for?
2004 Ford F150 Logo

551 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5516 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...