Question about Daewoo Nubira

2 Answers

TURN LIGHST DON'T WORK

Suddenly nor my turn lights neither the warning signals work. I can't even heard the tick-tack noise. I have checked the fuse but it's ok. Could it be because of the device which controls these functions? If so, where is it placed on the car? Thanks.

Posted by on

  • rasares Apr 18, 2009

    perfect. solved, lam escelente speed of response.

  • threethings May 16, 2009

    would it be the flasher relay if you change the fuse and it works a couple of times and then quits working?

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

You need to replace the flasher relay under the dash on the drivers side. it may be mounted in the fuse box or as a stand alone relay. if it's in the fuse box it will likely be larger then any of the other relays.

Posted on Apr 17, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Sounds like your flasher went out. they are generally behind the glove compartment. not sure on this vehicle. the flasher is either square or cylindrical and what makes the tick-tock noise. power goes through the fuse to it. if it goes out, not turn signals or flashers. It should be pretty easy to get to either way. and it doesnt cost very much. hope this helps

Posted on Apr 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does not start?


I have never heard of an engine noise being described as a tick tack rattling noise. (I assume you mean Tick Tack candy/breathmints?) \

Either way, if it doesnt start, but just makes a rattling/knocking sound, I would ask you did it just quit on you and not restart? Or did it get you where you were going and then would not start when you were ready to leave? If the answer to the first question is yes, then you are likely facing a broken timing belt. The sound you hear are the valves coming into contact with the pistons when you are cranking the starter. This is a bad sound. Lets hope your answer was no to the first and yes to the second. Are you sure have gas? I cannot tell you how many times people have told me "It just won't start!" only to pour a gallon of gas in and varrroooom! What about oil? The tick tack sound just doesn't sound like a healthy engine sound in my head. Do you have oil in the engine? Does somebody hate you enough to drop nuts and bolts into your intake manifold? That would sound like tick tacks. BIG GIANT tick tacks, but tick tacks nonetheless.

Apr 29, 2014 | Toyota Sienna Cars & Trucks

2 Answers

Turn signal flashes fast but bulbs good


Under the dashboard there is a round metal device called a flasher its where the tick noise comes from when you activate your turn signal I would try replacing that next Good luck

Apr 04, 2014 | Toyota Camry Cars & Trucks

1 Answer

Tapping/ticking noise when rpm goes above 2000 with check oil warning on my chevrolet lumina ls 2005 model


You will have to take an oil pressure reading and compare to specifications. It could be that the pick up screen is plugged. Do not drive the car as damage to engine will occur.

Jan 14, 2013 | Cars & Trucks

1 Answer

Hazard warning light don't work


Its possibe that ypou have independient FLASHER device, one for hazard and one for turn signal; check backside of fuse panel and replace it.

Aug 28, 2012 | 1993 Plymouth Voyager

1 Answer

2006 Saturn turn signals on right side don't work


May want to check the bulbs on the trailer to ensure the connections are solid and the wiring is in tack. May be a weak ground wire connection.

May 09, 2017 | Saturn Vue Cars & Trucks

1 Answer

Car won't start and makes a ticking noise


CHECK IF TURN SIGNALS WORK, USUALLY ON GM CARS IF A BULB IS BURNED IT WILL TICK FASTER, IT IS AN INDUCATION OF BURNT BULB - COULD BE FRONT OR REAR

May 19, 2010 | 1999 Chevrolet Cavalier

1 Answer

1999 Nissan Altima GXE Turn signal problem


you have a busted bulb, your hazard may be working fine but the bulb is double contact so one part is working and the other is not. just check which bulb is busted.

Apr 20, 2009 | 1999 Nissan Altima

1 Answer

Need


I heard a loud knocking noise on the front left driver side. There are no warning lights which appear on the dash. I have a 1997 toyota corolla manual transmission. Help!!!!!!!!!!!!

Jul 01, 2008 | 1997 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

315 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76682 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...