Question about 2000 Chevrolet Tahoe

2 Answers

1997 Chevy Tahoe will crank but will not start.

Have replaced fuel filter. New dist. cap & roter. Replaced spark plugs as well as plug wires. Tested fuel injection pressure and that was good. Just replaced Pick-up Coil Capteur and still won't start. Please help. thanks...

Posted by on

  • 3 more comments 
  • carhob May 11, 2010

    did u check ign. fuses?

  • carhob May 11, 2010

    do u have spark at plugs,do u have fuel pressure from pump?

  • Anonymous Mar 20, 2014

    Replaced the dist. Cap and rotar button still will not crank. Has no fuel pump pressure

  • Anonymous Mar 21, 2014

    I replaced the plugs and plug wires the coil and stribeder and the gas filter and it still has a jerking when driving my car..What could be the problem ?

  • Anonymous Mar 21, 2014

    replaced plugs wires and plugs coil and stribiter and the fuel filter and still has a jerking when I am driving.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 67 Answers

Check the fuse for the injetor. if is bad

Posted on Apr 17, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check the firing order of the spark plugs, you can call any autozone and tell them the motor size and they will tell you the firing order. Has it the same motor or different. Ours is 5.7 and this is what we had to do. Now it starts, but sometimes hesitate. I think we need to replace starter now from trying to start it so much until we figured it out

Posted on May 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Im getting a crank/ no start situation on my 93 chevy astro ext 4.3Ltr v6 and ive never let a vehicle beat me b4 but this one is giving me a sound whoopin - pls help


Easiest way to trouble shoot a crank no start is to spray starting fluid into the air cleaner intake before you crank it. If it fires then dies it is a fuel problem. If it doesn't fire it is a spark problem. If it fires then dies, check the fuel pressure at the engine end of the fuel line. Pressure below spec prevents the injectors from working properly. See shop manual for the proper procedure.
If it doesn't fire put a spark tester at one of the plug wires set to the proper gap to measure the spark voltage being developed by the coil etc. Good luck.

Sep 22, 2015 | Cars & Trucks

1 Answer

Won't start. Have I missed something?


Starter is good,battery and connection,Cap is good no cracks.

Apr 23, 2013 | 1987 Chevrolet Camaro

1 Answer

My car won't start,seems like no spark?/,just turns over and over


before u replace the whole dist. have u first checked for fuel delivery on the carb or fuel rail, and then if u have that then check the spark plug wire by removing one while cranking by arcing to metal , if you see spark then dist is good if not then replace, but if dist is good and still no start then check coil pack and or all fuses

Apr 25, 2012 | Cars & Trucks

1 Answer

I have a 1990 dodge ram 250 3.9 v6 just replaced the fuel pump and the map sencer and the intake temp. sencer and fuel filter new spark plugs wires cap rotor and the dist. pick up plate ran good for one...


could it be your crank sensor?
having a similar problem with a dakota. dodge tells me it may be the dist, but seeing as how you replaced it with a new one it could be that the sensor needs replacing

Apr 06, 2011 | 1990 Dodge Ram

1 Answer

What part get replaced on a complete tune up on a 2000 chevy tahoe?


I would replace
1. spark plugs. Do not go cheap on the plugs use the proper AC Delco spark plug
2. cap and rotor
3. spark plug wires
4.fuel filter
and then i would have a fuel injection cleaning done . there is not a timing adjustment or air fuel adjustment this is all done by the PCM ( Powertrain Control Module )

Mar 04, 2011 | 2002 Chevrolet Tahoe

1 Answer

2004 ford 6.0 cranks over but will not start , has fuel at filter


You need to make sure the engine is getting gas to your injectors. Now, if the engine is getting gas, you need to make sure you are getting spark. There are many things that can cause a vehicle to not start. Your timing belt/chain may be broken. You could have a bad cam sensor and crank sensor. It may be in the plugs/coils, wires, distributor, dist.cap, roter, ecm. You just need to check each possibility the best you can. Some can be visually inspected and some will need tested. If you have a question, feel free to ask me.

Feb 28, 2011 | Ford F-250 Super Duty Cars & Trucks

2 Answers

97 chevy cargo van 5.7liter engine. Replaced fuel pump, dist.cap and rotor, spark plugs and wires air filter and oil change and oil filter. Will crank but won't start. Tried putting starting fluid air...


try to spray some carburetor cleaner inside where the air goes in the engine...it will clean the system and it might start...
press some gas when you try to start the vehicle...
good luck!

Oct 09, 2010 | 2000 Chevrolet Express Cargo

1 Answer

I HAVE A 1988 CHEVY VAN G20 5.7 I CHECKED TIMEING CHAIN NEW PLUGS,PLUG WIRES,DIST CAP, ROTOR,COIL,FLUSHED FUEL TANK,NEW FUEL PUMP AND FILTER I HAVE GOOD FUEL PRESSURE,GOOD COMPRESSION,THE PROBLEM IS SPARK,...


1/ Have you fitted the spark plug leads in the proper firing order.
2/ Look inside the top of distributor Top (this is not the first time a new distributer cap has very small crack) or the rotor arm is fitting the cap properly. Hope this helps Best Wishes, Malcolm Campbell.

Jul 04, 2017 | 1988 Chevrolet G20

2 Answers

1997 gmc savana 4.3, wont start ,has new fuel pump, new pressure regulator, new spark plugs , i cleand up the maxi ijector, looks ok no leaks,i do have spark and fuel but still wont work any ideas


only 3 things will cause this engine not to start (crank and not start) fuel, ignition, timing.
You haven't mentioned the engine cranks over or not, so I have to assume it cranks over.
Possible timing chain or the crank sensor on the timing chain. Have you checked this? you need to remove number 1 spark plug & when the piston is in the full top position on compression, remove the dist cap & see what spark plug wire the rotor is pointing to inside the dist cap. (I'm sure if you google checking for top dead center you'll find the proper procedure)

Oct 12, 2009 | GMC G3500 Cars & Trucks

Not finding what you are looking for?
2000 Chevrolet Tahoe Logo

404 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...