Question about 2006 Chevrolet Silverado 1500 2WD

1 Answer

Shifting problem with my truck.

My name is Joe and I am having problems with truck. When I am stopped and I try to put my truck in first or reverse sometimes it will not go in gear. I have been told five to six different things wrong. I have even bought a chiltons and there is no help in that big expensive book either. I was told it was the clutch, but when shifting there is no grinding. I was told that it can not be the slave or master cylinder because they would leaking and there would be a pressure loss. There is neither. The clutch fully engages and allows shifting through all the gears. Also, when it will not go in to first I put it in second and it will then go into first. The same thing happens when I try to go into reverse I put it in fifth and then it will allow me to go into reverse. Please I need so help that makes sense. Dealerships will not even return my calls.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 334 Answers

It duse sound like the clutch . but i would try bleeding the slave clinder frist. it may work . but i think you will have to replace the clutch. good luck

Posted on Apr 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have posted this before my engine stalls when put into drive and also reverse I have cleaned the egr valve replased the fuel filter cleaned tank filter still no good ps would a blocked cat do this...


We would need more info to give advice.
I doubt a clogged cat would cause the problem.
Have you checked fuel pressure, can you raise RPM in park, and does the engine die suddenly when you shift into gear ?

Mar 12, 2015 | Cars & Trucks

3 Answers

I have a 2001 elantra. What would make it stay in reverse and 1st gear.it is a manual transmission


when you put it in reverse,first thing you feel a spring.after tthat you lift,
a security plate,this plate prevent you from going reverse into 1 gear.
cause the axel turn a little further when you allreddy has stop the car.
this takes two sec.thats why when putting it in reverse after you feel the spring you wait two seconds,then puch al the way in reverse.

Jul 26, 2014 | 2001 Hyundai Elantra

1 Answer

What could the problem be with 1999 villager wont go forward or reverse?


I forget the name, but it could be the shift connecttion. It the connection point behind the shifter in the car and the transmission. The port disconnected mine in my car cause they couldn't figure out how to shift it. It basically put the car into nuetral. No forward no reverse. But engine runs fine.

May 20, 2014 | 1999 Mercury Villager

1 Answer

Truck will only shift to nuetral ,won't move in drive or reverse.


Simple either you have no fluid in the transmission or it has failed and needs to be rebuilt.

Mar 17, 2014 | 1996 Dodge Ram

2 Answers

2003 altima dash fuse blows when i put in reverse and alternator stops working


It is electrical, could be initiated by mechanical (shift lever mechanics are pinching a wire in reverse) or a shorted wire or solenoid in the reverse light system or transmission solenoid circuit. Need a detailed wiring diagram to determine path of circuit for that fuse. That is where you need to start. Try your local library or dealer for a service manual. Look Online also.

Nov 02, 2013 | Cars & Trucks

1 Answer

Transmition problems with 1989 ford f150 1/2 ton 2wd 5.0


Sorry bud you need a transmission repair or replacement.

Sep 19, 2012 | 1989 Ford F 150

1 Answer

Thanks for your help! My 1998 Ford contour four-cylinder, five-speed manual transmission intermittently has difficulty going into reverse and first gears. The problem is intermittent. Most of the time...


You still have air trapped in teh hydrualic clutch. Bleed again and again until you get the air out. try actuating teh clutch several times fast just before you bleed it.

the clutch is partially applied, that's why it is hard to shift. the synchros can;t overcome the input shaft spinning.

Guaranteed you have air, 100%

Jan 13, 2011 | 1997 Ford Contour

1 Answer

94 Chrysler Concorde Tranny Problems


Have your transmission oil filter changed;
it is located under the transmission pan
The oil is what makes the transmission shift
When you shut off the engine it stops the transmission pump then when you start up again the transmission shifts until the filter clogs again

May 28, 2009 | 1994 Chrysler Concorde

1 Answer

Grinding when in reverse and tries bogging down at lights


stop shifting so hard. your reverse gear is the same exact gear as your first, so if you shift hard and grind that gear a little then reverse will be harder to get into. you probably need your transmission rebuilt the harder your engine has to work the more its going to bogg down

May 14, 2009 | 1987 Ford Ranger

2 Answers

2003 Dodge DSL 2500 transmission shifting problems


sounds like you should start by dropping the pan and changing the filter, put cheap fluid in it or reuse the old fluid if its not too bad bring it to a shop and have a transmission flush performed with a good flush machine your valve body is sticking and this should clear things up please rate -jeff

Sep 05, 2008 | 2004 Dodge Ram 2500

Not finding what you are looking for?
Cars & Trucks Logo

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...