Question about 2001 Ford Focus

2 Answers

Ford focus will not start.

Stoped at a light and will not start replaced fule pump and spark plugs and it still will not start

Posted by on

  • l_jcarter Apr 21, 2009

    my timing chain slipped a couple of teeth, be cause the tensing pully was bad

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 334 Answers

Do you have a nersher switch on that car ? ford had them for a safty . see if you have spark . and do you hear your fuel pump when you trun the key on .you may have a blown fuse good luck

Posted on Apr 17, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Check the timing chain, it might have broke and check the oil to make sure it have enough pressure to keep pressure on the chain tentional.

Posted on Apr 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 225 that has spark and good comp but wont start the man said it could be fule pump ?


Compression, fuel, timing and spark and a sufficient cranking speed are all required for an engine to start. Each should be checked through systematically but check the immobiliser first.

Dec 28, 2016 | Cars & Trucks

1 Answer

2000 ford focus cranks wont start has fule and compression


Check for spark. Remove a spark plug and attach the wire back on, then hold the plug against the engine block and have someone crank the engine. Watch for a spark.

Apr 12, 2013 | 2000 Ford Focus

1 Answer

Just replaced my motor in my focus and the mechanic says it wont start


well the mechanic should be asking questions here because the first motor might have not been the problem if a new used one dosent start 1st check for fule is fule getting to the fule rail 2nd is there spark at the spark plugs with plug removed but pluged in turn over and look at spark plugs to see if they are even sparking when attempting to turnover

Sep 27, 2012 | 2000 Ford Focus

1 Answer

My car was running great, i killed the car ran inside and back out about 10min later and it would not start! Replased the fule pump, still will not start. 2008 mustang gt


Is the fuel pump getting voltage and ground ?
Are you getting spark at the plugs ?
Could be a crank sensor or relay among other things.

Jul 28, 2012 | 2008 Ford Mustang

1 Answer

My 97 ford taurus has a rough idle, i have a new fule pump and new spark plugs, this only started after inot using the car for two aand a half years.


well after two and a half years the fuel goes bad and needs replaced also you replaced the fuel pump and didnt mention the fuel filter you should change the fuel filter also....

Sep 05, 2010 | 1997 Ford Taurus

1 Answer

I have a 1998 ford wind star new fule pump but still not geting fule , wont crank engine turns ove but won;t start


INSTALL PRESSURE GUAGE THEN CK, VOLTAGE TO PUMP PCM TURNS ON PUMP RELAY FOR 2 SECONDS WHEN KEY CYCLED ON ,, IF NO POWER CK INERTIA SWITCH ( MAY BE TRIPPED ) IF NO POWER TO INERTIA SWITCH CK FUEL PUMP RELAY IF NO VOLTAGE AT PUMP RELAY THEN CHECK FOR SPARK AT PLUGS IF NO SPARK CK PCM POWER RELAY IT SUPPLIES VOLTAGE TO PCM THAT INTURN POWERS FUEL PUMP RELAY

HOPE THIS HELPS

Aug 08, 2010 | 1998 Ford Windstar

2 Answers

Ford Taurs will turn over but not start


check for spark, check timing, check for fuel pressure

Sep 12, 2009 | 1995 Ford Taurus

1 Answer

Fuel Pump


number 2 cylinder has broken rings ,or the coilpack/leads need replacing check for current to fuel pump if no power checkfor spark if no spark either it could be immobiliser

Aug 21, 2008 | 2001 Ford Focus

1 Answer

Can you help me please?


Clicking noise and won't start.

Aug 21, 2008 | 2001 Ford Focus

Not finding what you are looking for?
2001 Ford Focus Logo

Related Topics:

204 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

78289 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5655 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...