Question about 2004 Ford F150

3 Answers

I Have A 2005 F-150 Lariet, Just Changed The Rotors and Pads. ABS is engaging then ABS light comes on then brakes work fine,why is this happening ????

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My abs light is on, computer says rear housing abs sensor is out, I replaced abs sensor with new ones, but still have same problem. so i checked for power going back to abs sensor going to housing and have no power. what would be problem. I checked all small fuses which showed good. can not get abs light to go off with computer. has it got any more fuses or relays i need to check?

Posted on Jul 02, 2012

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 14,036 Answers

Check wheel sensors wires.you could have accidently knock them out while replacing the rotor and brakes.

Posted on Apr 17, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

You will have to get the abs computer tested for codes, unfortunately these days things are almost too much for us backyard mechanics!!!

Posted on Apr 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code 4029 on my ABS code scanner?


Check the air gaps on the abs ring to sensor.

Aug 07, 2016 | 2003 Chrysler Town & Country

2 Answers

Brake and abs light is on what hapen


The antilock brake system has a problem and needs servicing quickly before you have an accident.

Oct 01, 2014 | 2006 Chrysler Town & Country

1 Answer

2005 Chevy impala brake pedal pulsation with brand new rotors installed


Is your ABS working properly? Under heavy braking the ABS should engage and 'pulse' the brakes on/off. It is normal to feel the brake petal flutter or pulse under your foot.

Under light braking there should be no pulsing as the ABS does not engage and you have changed the rotors and pads.

Nov 19, 2013 | 2005 Chevrolet Impala

2 Answers

ABS light came on after changing pads and rotors


The ABS reluctor ring is mounted on the back of the rotor by three fasteners. They do NOT come with the new rotor. IF you did not transfer that part, there would be nothing for the sensor to get it's signal or (sine wve) from. That would set codes. Did you transfer abs ring along with the hub when putting on the new rotors ?

May 17, 2010 | 2001 Isuzu Trooper

1 Answer

I changed the brake pads on a 05 equinox


Did you bump the ABS pickup at the wheel hub when you changed the brakes? Or are the wires maybe nicked? The noise is normal and might go away depending on the brake pad type you replaced with. The ABS problem might be caused by you.

Nov 24, 2009 | 2005 Chevrolet Equinox

1 Answer

I have just fitted new pads to the front of my 1998 bmw 523i almost immediatly after the warning lite came on.just before i changed,the last 15mph or so there was a shuddering till it came to stop.thought...


When you replaced your brake pads did you also replace your rotors??? If you haven't replaced them, I can almost guarantee your rotors are warped and need replacing. Anytime you replace brake pads, replace the rotors as well. That's what i reccomend!

Oct 05, 2009 | BMW 525 Cars & Trucks

1 Answer

Changed brake pads and fluid. Brake light/ABS light still lit.


Go back around and check to make sure you didnt accidentally pinch or cut a brake pad sensor. Also the ABS modules on VAG cars are pretty crappy.

Sep 11, 2009 | 1999 Audi A4

2 Answers

2002 Grand Prix GT - When applied the breaks work


ABS pump may be faulty. Quite common, that is the exact reason I always remove the fuse under the hood for all my ABS. on all cars. I don't trust them.

Aug 06, 2009 | 2006 Pontiac Grand Prix

1 Answer

Yellow DSC and Brake light on... recently changed brake pads


Abs and dsc are related and with the light on these won't work. It is possible that you need to go back to where the work was done to look this over.

Jun 07, 2009 | 2003 BMW 325

3 Answers

ABS light on after replacing the front and rear brake pads .


u will need to check the wheel speed sensors behind the brake rotors to see if they got damaged or disconnected during the brake job, as long as the ABS light is on the Anti-lock brake system is disabled, regular braking without the need of ABS will feel fine.

Apr 01, 2009 | GMC Sierra 2500 Cars & Trucks

Not finding what you are looking for?
2004 Ford F150 Logo

359 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...