Question about 1999 Ford Expedition

2 Answers

My signal lights do not work i have replaced the wand assembly and checked all fuses and they dont even turn on.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try replacing the flasher which is located underneath the steering column, this part will cost approx. $11.99, Good luck

Posted on Apr 17, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This happenned to me last Christmas. For me all it was, was a loose wire on the battery cables. I thought that was weird but sure enough, they got tightened and they worked. People were telling me it was the multifunctional switch, which is like $500.00 from where I live, so thankfully a little tightening did the trick. Hope that is all that it is for you.

Posted on Apr 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My suzuki grand vitara right signal light is not working even i replace it with new bulb.what is wrong pls help me.


Check the fuses first and if they are ok it could be the turn signal switch or multi function switch..

Feb 16, 2015 | Suzuki Grand Vitara Cars & Trucks

2 Answers

Chrysler Vision hazard light


on some of these models, the hazard switch operates through its own flasher fuse. if this is the case, locating and replacing the fuse ($4) should do it. Location should be in the owners manual.

Nov 10, 2013 | 1997 Chrysler LHS

1 Answer

Turn signals dont work


Check the fuse if the turn signal lights are not even coming on. If the light are coming on but just not flashing, then the flasher relay is defective. Replace the relay to solve the problem.

Sep 02, 2010 | 2001 Pontiac Grand Am SE

1 Answer

Back break lights


Same problem have someone check the ECM and the turn signal assembly voltage. The ECM is located by fuse box under dash and turn signal assembly is in the steering wheel. But they can check the voltage on both before replacing. Good luck

Apr 14, 2010 | 1996 Mercury Mystique

1 Answer

Troubleshooting tail light assembly issues in my Jeep


Check fuse panel, under dash, as well as under hood. Owners manual should also give you map of fuses. May say"park" lights, "running lights", or something similar.

Jan 06, 2010 | 2005 Jeep Grand Cherokee

1 Answer

Installed new headlights assemblys. turn signals


check once more the front turn bulbs, connections, fuse if front and rear have a separate one. Once you connect the front turn signal, blinking frequency should normalize.

Nov 08, 2009 | 1997 Dodge Caravan

1 Answer

Turn signal, dont work, emergeny flahers work


first you need to check the ground connection of the tail lamp, poor ground connection might be the cause. about the turn signal, clean the turn switch using contact cleaner spray. If this cannot solve the problem. The switch have to dissmantle and service manually.

Sep 02, 2009 | 1993 Mercury Grand Marquis

1 Answer

Dash lights-turn signal and rear lights


Access your fuse box and check the fuse labled- rear tail lgts,turn sgns, that fuse is blown, replace the fuse with the same value fuse, while your under there, on the fuse box or next to it you'll find 2 round plug in components, about the size of a Marshmellow, one of these is your flasher unit and the other is for your turn signals, replace both of these, even though one may work, it's just good sense to replace both, that shoud fix your rear lighting problem. good luck.....

Jul 11, 2009 | 1994 Ford Crown Victoria

3 Answers

1997 dodge avenger turn signal probs and location


replace the turn signal switch it self, mine did the same thing with the left turn signal, put in fuse and it will continue to flash... went to junk yard pulled one out of a 97 avenger just like mine, swapped them out and now it works fine. looked to be like some corrosion... to repace: 3 screws under columb, 2 screws on side of signal switch (black plastic side). unplug and replace

Mar 20, 2009 | 1997 Dodge Avenger

2 Answers

Turn signals do not work


hi there, i would first check the fuse box for a blown fuse. secondly, i would check the relay for issues. last, i would check the actual wand or switch for lose connections and bad switch assembly. the issue will be in one or both of the areas stated.

Mar 03, 2009 | 2003 Chevrolet Suburban 1500

Not finding what you are looking for?
1999 Ford Expedition Logo

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...