Question about 2000 Ford F250 Super Duty Crew Cabs
Truck was running fine stopped at a job would not crank ,no power windows wipers all else seems ok. checked fuses and wiring under dash. only way to start was to jump solenoid
First thing to check for is if the starter has a thermal overcrank or not, thermal overcrank sensor is located right on the starter it should have two wires going to the connector, check to make sure you have a ground to one wire at key engine off, next if ground is present on one wire plug back into sensor on starter and make sure ground is bridge or present on other wire, if ground is not transfer to other circuit when plugged in then thermal overcrank sensor is bad than just jump circuit or replace sensor, now if ground is not present on either circuit at key on engine off than applied ground to both wire and retest starter cranking at key switch, please update once test is complete, thanks.
Posted on Sep 23, 2009
If it a standard check the cluch safety switch, i had a switch come apart on a f250 before and caused this
Posted on Apr 17, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Apr 27, 2016 | Cars & Trucks
Oct 11, 2012 | 2003 Ford F250 Super Duty Crew Cab
Apr 08, 2010 | 2002 Ford F250 Super Duty SuperCab
Apr 15, 2017 | Ford F-250 Cars & Trucks
Aug 11, 2009 | Honda Prelude Cars & Trucks
Feb 08, 2009 | 1999 Plymouth Grand Voyager
Nov 07, 2008 | 1999 Ford F250 Regular Cab
447 people viewed this question
Usually answered in minutes!