Question about 2000 Chrysler Grand Voyager

1 Answer

2000 Chrysler Voyager Instrument Cluster is dead

The front panel instrument cluster - gas gauge, speedometer, odometer, rpm and radiator gauge are all dark and not on. I replaced the fuse to no avail.

Posted by on

  • Anonymous Mar 16, 2014

    1999 grand voyager had to remove the instrument cluster and sotter 2 cracked pins because everything was flatline or dark. Put it back in now everything works except the temperature gauge which starts off way past hot and never comes down. How can this be fixed?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 48 Answers

Have you got a dimmer switch on your model to dim the dash lights. if you have it may be faulty. link the cables together if the lights work the switch is faulty. if you have not got a dimmer switch
your printed circuit on the back of the dash may be faulty or the plug in the back of the dash is not pushed all the way in. hope this helps

Posted on Apr 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1998'Ford Explorer and half the dash lights are out and all pod a sudden my speedometer just quit. Need to know what fuses would go to these, so I can try that. Ty


Sorry but it's not a fuse problem . There is not a fuse just for the speedometer . The microprocessor inside the instrument cluster determines where the speedometer needle points , just like the fuel gauge , tachometer etc... Having the vehicle checked for DTC'S would be the proper step to take .
Vehicle Speed Signal
The vehicle speed signal is generated by the rear anti-lock brake sensor and sent to the 4-wheel anti-lock brake system (4WABS) module. The 4WABS module sends the vehicle speed signal via circuit 679 (GY/BK) to all systems which require a vehicle speed signal input.
Speedometer
The electronic speedometer receives a speed signal from the 4WABS module.

  • The Speedometer/Odometer Is Inoperative
  • Circuitry.
  • Speedometer.
  • GO to Pinpoint Test E .

No where in this factory diagnostic step does it say to check a fuse !

PINPOINT TEST E: THE SPEEDOMETER/ODOMETER IS INOPERATIVE CONDITIONS DETAILS/RESULTS/ACTIONS E1 CHECK THE VOLTAGE TO THE INSTRUMENT CLUSTER
Instrument Cluster
Measure the voltage between instrument cluster C288-7, circuit 1001 (WH/YE), and ground.
  • Is the voltage greater than 10 volts?
Yes GO to E2 .

No REPAIR circuit 1001 (WH/YE). TEST the system for normal operation.
E2 CHECK THE INSTRUMENT CLUSTER PRINTED CIRCUIT
Instrument Cluster
NOTE: Measurements must be made to the speedometer gauge pins that are inside the instrument cluster printed circuit clips.
    Measure the resistance between the speedometer pins (which can be seen in the middle of the instrument cluster printed circuit clips) and the corresponding instrument cluster terminal. Refer to the table for the pin and terminal assignments.
    Instrument Cluster Terminal Speedometer Gauge Pin C286-13 C287-1 S C287-2 G C288-7 BATT
    .

  • Are the resistances less than 1 ohm?
Yes GO to E3 .

No INSTALL a new instrument cluster printed circuit. REFER to Instrument Cluster Printed Circuit . TEST the system for normal operation.
Your best bet , take it to a qualified repair shop

Mar 30, 2017 | Cars & Trucks

3 Answers

My speedometer works but my digital odometer does not work on my 2003 old alero


This is one guy's advice: Replace the speedo head, that should take care of the problem."

This site is also interesting because the guy said
General Motors cars had instrument cluster problems from 2003 through 2006. When I researched instrument cluster problems on the Internet what I found raised concerns in me. Many of those vehicles had problems that began with the instrument cluster, but eventually led to the engine refusing to start.
(an electronic instrument cluster, digital instrument panel or digital dash for short, is a set of instrumentation, including the speedometer, that is displayed with a digital readout rather than with the traditional analog gauges. Many refer to it simply as a digital speedometer.)

http://www.instructables.com/id/Erratic-Instrument-Panel-on-GM-Cars/

Feb 12, 2017 | 2003 Oldsmobile Alero

1 Answer

My 2000 Chevy s15 Rpm and Gas Gauge is not working


I didn't see an s15 in that model year, in my database?
If the speedometer works but the tach doesn't, I think something is wrong with instrument cluster?
GM has had a problem with fuel gage sending units. The sending units are not hard wired to instrument cluster, they send signal to pcm, the pcm sends serial data to instrument cluster, telling the cluster the gage settings.
It may be possible to use different size resistors in place of the fuel level sending unit, to see if fuel gage reacts properly to different resistors, if the gage reacts properly, then I think the problem is the fuel gage sending unit.

Nov 02, 2016 | Chevrolet Cars & Trucks

1 Answer

How do I DETERMAN WHAT IS WRONG my speedometer and rpm gauges aren't working


a fuse blew.
this car has an electronic dash cluster. (with brain)
first is fuses. (check them first) (2 of them)
second is scan it. scan the PCM for DTC error !

if rpm dies, for sensors the engine dies...
The PCM runs spark and injection off 2 sensor and RPM
if they die so does spark and injection.
the cluster has self test mode, try that first?
this proves the cluster is ok.
this is covered in the FSM for your JEEP

the WJ jeep
Chapter 8J covers all this.. to great details.
page 8
fuse 17 and 22 must be good. JB box, cab.

posted now 100 of times, here it is again.
quote
The instrument cluster actuator test will put the
instrument cluster into its self-diagnostic mode. In
this mode the instrument cluster can perform a selfdiagnostic
test that will confirm that the instrument
cluster circuitry, the gauges, the PCI data bus message
controlled indicators, and the electro-luminescent
illumination lamp (if equipped) are capable of
operating as designed. During the actuator test the
instrument cluster circuitry will sweep each of the
gauge needles across the gauge faces, illuminate each
of the segments in the Vacuum-Fluorescent Display
(VFD), turn all of the PCI data bus message-controlled
indicators on and off again, and turn the electro-
luminescent illumination lamp (if equipped) on
and off again.
Successful completion of the actuator test will confirm
that the instrument cluster is operational. However,
there may still be a problem with the PCI data
bus, the Powertrain Control Module, the Airbag Control
Module (ACM), the Body Control Module (BCM),
the Controller Anti-lock Brake (CAB), the Sentry Key
Immobilizer Module (SKIM), or the inputs to one of
these electronic control modules. Use a DRBIIIt scan
tool to diagnose these components. Refer to the
appropriate diagnostic information.
If an individual indicator lamp or the electro-luminescent
illumination lamp do not illuminate during
the actuator test, the instrument cluster should be
removed. However, check that the incandescent lamp
bulb is not faulty, that the bulb holder is properly
installed on the instrument cluster electronic circuit
board, or that the electro-luminescent lamp pigtail
wire connector is properly connected to the instrument
cluster electronic circuit board before considering
instrument cluster replacement. If the bulb and
bulb holder, or the electro-luminescent lamp connection
check OK, replace the faulty instrument cluster
unit.
(1) Begin the test with the ignition switch in the
Off position.
(2) Depress the odometer/trip odometer switch button.
(3) While still holding the odometer/trip odometer
switch button depressed, turn the ignition switch to
the On position, but do not start the engine.
(4) Release the odometer/trip odometer switch button.
(5) The instrument cluster will automatically
begin the actuator test sequence, as follows:
(a) The cluster will turn on, then off again each
of the PCI data bus message controlled indicators
(except Airbag) to confirm the functionality of the
indicator and the cluster control circuitry:
(b) The cluster will sweep the needles for each of
the gauges from minimum to maximum and back
to minimum to confirm the functionality of the
gauge and the cluster control circuitry:
(c) Only on models with a premium version of
the cluster, the cluster will illuminate the electroluminescent
lamp and turn it off again to confirm
the functionality of the lamp and the cluster control
circuitry.
(d) The cluster will sequentially step the odometer/
trip odometer VFD display from all zeros
(000000) through all nines (999999) to confirm the
functionality of all VFD segments and their control
circuitry, then display the software version number,
followed by "DONE".
(6) The actuator test is now completed. The instrument
cluster will automatically exit the self-diagnostic
mode and return to normal operation at the
completion of the test, if the ignition switch is turned
to the Off position during the test, or if a vehicle
speed message indicating that the vehicle is moving
is received from the PCM over the PCI data bus during
the test.
(7) Go back to Step 1 to repeat the test, if
required
end quote.


if this passes and fuses are good
then you may have DTC errors scanned
if you scan it and you see comminications error from PCM to cluster, well that be it. ... and am not going into THAT>here.

Aug 18, 2015 | 2004 Jeep Grand Cherokee Overland

2 Answers

Where is cluster for speedometer lights


The "cluster" means all of the things you see under the plastic cover in front of the driver, the 'gauges'. The term is a reference to the 'instrument cluster' including speedometer, tachometer, fuel gauge, idiot lights, temperature gauge, everything.
Get a second independent opinion since this is very unusual. Most likely you have a blown fuse.

Aug 26, 2012 | 1998 Cadillac DeVille

1 Answer

Speedometer,Gas gauge,heat gauge and RPM is not working. what do I look for?


The contacts on where the instrument cluster plug in in the back. If you check my comments you will see that this diagnostic approach works. As unconventional as it may sound. Turn the key on in the run position, but don't start the vehicle. Hit the dash board just above the steering wheel kinda hard. But don't hurt yourself. If you watch the instruments, they should come back on. This is by no means a way to fix it. It may work for a week, or it may work for a couple of years. It didn't fix the problem. If you're more comfortable, push back on the instrument cluster face and wiggle it back and forth. It will take longer but also works. Then start looking for a new cluster and/or someone to install it. If I've helped, please rate my assistance and leave a comment to let others like yourself know that it worked, and help them too. Thank you, and good luck.

Dec 04, 2010 | 2000 Chrysler Grand Voyager

3 Answers

Speedometer, gas gauge, odometer, rpm gauge not working


My gas guage, speed odometer and tempiture does not work
The speed odometre is reading 9999999 what should i do

Jul 29, 2009 | 1998 Nissan Frontier

2 Answers

1995 Cougar Odometer/trip-meter inop


Section 13-01: Instrument Cluster—Conventional 1995 Thunderbird, Cougar Workshop Manual REMOVAL AND INSTALLATION Instrument Cluster Removal and Installation
  1. Disconnect battery ground cable (14301) .
  1. Remove screws holding instrument panel reinforcement (017A28) .
  1. Remove screws holding instrument panel lower shield (045G02) .
  1. Remove fasteners holding steering wheel column as outlined in Section 11-04 . Gently lower steering column.
  1. Remove fasteners holding the instrument panel finish panel (044D70) and gently pry off.



  1. Remove four instrument cluster retaining screws. (Do not remove screws from the instrument cluster main lens (10887) and instrument cluster mask (10890) ).
  1. Slide the instrument cluster (10849) to the right of the instrument panel opening and unhook the instrument panel harness from the back of the instrument cluster .
  1. Remove the instrument cluster from the instrument panel (04320) .
-----------------------
Speedometer/Odometer Federal law requires that the odometer in any replacement speedometer (17255) must register the same mileage as that registered in the removed speedometer . Since the speedometer mileage cannot be reset on this unit, affix odometer sticker to driver's door pillar and record original vehicle mileage. Removal
  1. Disconnect battery ground cable (14301) .
  1. Remove the instrument cluster (10849) as outlined.
  1. Remove seven screws retaining the instrument cluster mask (10890) and instrument cluster main lens (10887) .
  1. Remove speedometer assembly.
Installation
  1. Position the speedometer assembly to the instrument cluster back plate (10848) and install.
  1. Position the instrument cluster mask and instrument cluster main lens to the instrument cluster back plate and install the seven retaining screws.
  1. Install the instrument cluster as outlined.
  1. Connect battery ground cable and check the operation of the speedometer .
please rate if this helps

Mar 24, 2009 | 1994 Mercury Cougar

Not finding what you are looking for?
2000 Chrysler Grand Voyager Logo

1,007 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...