Question about Pontiac Grand Prix

1 Answer

Replace water pump 93 grand prix

How do you change water pump on 93 grand prix 3.1L engine, thank you

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 594 Answers

Here is a step by step instruction on how to replace your water pump. please do not forget to rate and comment about your experience today with fixya.

  1. Disconnect the negative battery cable.
  2. Remove the air cleaner assembly.
  3. If necessary for access, remove the coolant recovery reservoir.
  4. Partially drain the coolant, into a suitable container, to a level below the water pump.
  5. If equipped, remove the serpentine belt guard/cover.
  6. Remove the serpentine belt.
  7. Remove the retaining bolts, then remove the water pump pulley.
  8. Unfasten the 5 water pump attaching bolts, then remove the water pump and gasket. Discard the gasket.
To install:
  1. Thoroughly clean the water pump mounting surfaces.
  2. Position a new gasket, then install the water pump.
  3. Install the attaching bolts and tighten them to 89 inch lbs. (10 Nm).
  4. Install the water pump pulley.
  5. Install the serpentine belt and belt cover/guard (if equipped).
  6. Refill the cooling system with the specified type and amount amount of engine coolant.
  7. Install the air cleaner assembly.
  8. Connect the negative battery cable, then start the engine and check for coolant leaks.

Posted on Apr 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I recently bought a 93' Grand Prix, it's only 130k


If it acted like it wanted to start, then I would suspect the fuel pump. Try hitting the bottom of the tank, this sometimes jars the pump to start working again. If it works you can drive it, but you will need to replace the pump, it will only do this so many times.

Aug 04, 2011 | 1993 Pontiac Grand Prix

1 Answer

How much does it cost to fix a water pump in a 2005 Pontiac Grand Prix.


The price of the water pump depends on which engine you have in your car. There are three different size engines for a 2005 grand prix. If your not going to do the work yourself, I cant give you an acurate quote as all mechanics charge differently. You'll just have to go to differend mechanics and get some quotes.

Jul 07, 2010 | 2005 Pontiac Grand Prix

1 Answer

Need to replace my water pump do you have a diagram


5.3L Grand Prix Engine
  1. Place a drain pan underneath the radiator. When the engine is cool, drain the cooling system from the radiator into the pan.
  2. Remove the battery from the engine along with its tray.
  3. Take the drive belt out of the engine.
  4. Loosen and remove the three bolts to the water pump and remove the pump, throwing away the gasket.
  5. Clean the gasket mating surfaces and install the new water pump with a new gasket, tightening the bolts to 89 inch pounds (10 Nm).
  6. Reinstall the drive belt and the battery with the battery tray.
  7. Refill the engine's cooling system with coolant. Start the car and check for leaks when the engine reaches normal operating temperature.
3.5L Grand Prix Engine
  1. Partially drain the coolant from the cooling system.
  2. Disconnect the surge tank outlet hose and remove the drive belt.
  3. Remove the idler pulley and the water pump pulley, making sure to note the locations of the bolts as you remove them as they are various lengths.
  4. Loosen and remove the bolts to the water pump, also taking note at their locations, and remove the pump.
  5. Install the new water pump with a new gasket, tightening the bolts to 124 inch pounds (14 Nm).
  6. Reattach the water pump pulley, tightening the bolts to 106 inch pounds (12 Nm).
  7. Reinstall the idler pulley, tightening the bolts to 37 foot pounds (50 Nm) and install the surge tank hose and drive belt.
  8. Refill the engine's cooling system with coolant.
  9. Start the car and check for leaks when the engine reaches normal operating temperature.
3.4L and 3.1L Grand Prix Engines

  1. Place a drain pan underneath the radiator. When the engine is cool, drain the cooling system from the radiator into the pan.
  2. Disconnect the negative battery cable.
  3. Remove the accessory drive belt guard and the accessory drive belt.
  4. Loosen and remove the water pump pulley bolts and remove the water pump pulley.
  5. Remove the water pump bolts and remove the water pump.
  6. Install the new water pump along with a new gasket, tightening the bolts to 89 inch pounds (10 Nm).
  7. Reinstall the water pump pulley and tighten the bolts to 18 foot pounds (25 Nm).
  8. Reattach the accessory drive belt with the drive belt guard.
  9. Refill the engine's cooling system with coolant.
  10. Start the car and check for leaks when the engine reaches normal operating temperature.

Dec 31, 2009 | 1999 Pontiac Grand Prix

2 Answers

I need to know where the water pump is in a Pontiac


Try this: http://www.ehow.com/how_5417718_remove-pump-pontiac-grand-prix.html

Dec 05, 2009 | 2001 Pontiac Grand Prix

4 Answers

My 1993 pontiac grand prix with the 3.1 engine stalls when it idles at a stop light but it starts right back up. it has plenty of power. we changed the o2 sensor did the vaccum leaks and ths spark plugs....


The next thing to try in regards to the stalling would be to change out the Throttle Position Sensor this sensor is the usual cause of this symptom.

Nov 05, 2009 | 1993 Pontiac Grand Prix

1 Answer

Change spark plugs 93 grand prix


ok you should remove the doge mounts in the front and tilt the motor forwers

Apr 18, 2009 | Pontiac Grand Prix Cars & Trucks

1 Answer

Engine light on, scan code said thermostat


93 grand cherokee limited signal lights don't work could u help me/

Feb 16, 2009 | 2004 Pontiac Grand Prix

1 Answer

Dtknog@yahoo.com


Are you sure you put the thermostat in the right direction? The 195 degree copper bulb shold be on the bottom side. If it is a stock one.

Jan 26, 2009 | 2000 Pontiac Grand Prix

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

744 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...