Question about 1984 Nissan Pickup

1 Answer

Constant starter noise after Ignition turned off

1984 Nissan 720 truck, 5spd stick. Just replaced starter.
Drove the truck a couple of miles, started hearing noise and vibration.
Pulled over stopped truck, turned off ignition. Still lot of noise.
Hot wire from starter to battery vibrating and warm. I had to disconnect the negative wire on battery to get it to stop making noise.

Please advise and thanks.

Posted by on

  • harvey_green Apr 17, 2009

    I appreciate the answer. Can you explain why it kept doing something while the ignition was off? Thanks again.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 255 Answers

Defective starter

shack

Posted on Apr 16, 2009

  • james shack Apr 17, 2009

    your solenoid welded together keeping the circuit closed if your a lucky folk tap solenoid with hammer a few turns. it might free up.
    otherwise drop starter test thru solenoid, not just thru the starter motor

    hope2help shack


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need Diagram of firing order foe 1984 nissan pickup 720


Here's a link Samson to your firing order. Need Diagram of firing order for 1984 nissan pickup 720 Google Search Ihave a 85 Nissan 720 4x4 with the 2.4 engine,I have put a weber carb in mine,here's a video to see. 85 Nissan 720 4x4 2 4 Weber conversion If you want to join a cool Nissan site,here's a link,type in 720world.com,I am a member,

Apr 22, 2015 | 1984 Nissan Pickup

2 Answers

Carburetor in my 84 nissan pickup will not idle down from 3500 rpm, why won't it idle down


Hi Shane,I have a 85 Nissan 720 4x4 with the 2.4 engine,had her for 22 years,our trucks have bad carburators,when I bought mine used,it had 108,000 miles on it and my carb started giving me problems,with the ideling,took it and had it rebuilt by 3 different carb shops at 200 a whop,no one could get it right,so I took it to the Nissan Dealer,they told me that they couldn't rebuilt it cause the bottom part is not assible,and told me that they were a bad design,so I did some research and found out about Weber carburators,so I bought one from redline,they cost 269.00 with kit,it's been on my 720 for 6 years now,plus I got a new remanufactured engine from Jasper engines and had a jasper installer put in in at the same time I put the new weber in.I spent a fortune trying to get the stock carb. right.I have 328,000 miles on the truck and it runs perfect.I plan on keeping my truck forever and that's the reason I put alot of money in it,A couple of months ago I redid the interior,it is now gray,was black,I live in Georgia and it is hot.Here's a video of mt Weber conversion,I have more pics and videos in you would like to see.My phone number is 706-580-6110 and my name is Tommy.https://www.youtube.com/watch?v=v5Fe9N0q2Kk

Apr 07, 2015 | 1984 Nissan Pickup

1 Answer

How come my 91 talon tsi awd 5spd wont start


Possible bad starter , low voltage in battery meaning dead battery or just bad and corroded connections at battery post and starter. Try cleaning connections and recharge battery if needed.

Nov 08, 2009 | 1991 Eagle Talon

2 Answers

After changing the starter and alternator and installed a new ignition switch my 1997 Nissan p/u started up fine. Drove it around town, stopped, turned off the engine and it started again right away. Drove...


Check and make sure you are getting power to the ignition switch and to the stator wire on the starter. Turn the key on and and measure the volts going to the starter on both wires. You should a atleast 12 volts going to the stator wire and to the main wire from the battery. If you are not getting power there it could be a fuseable link in the power wire from the ignition. I noticed that you replaced the ignition switch make sure the rod from the key switch has not come out of the switch.

Sep 16, 2009 | 1997 Nissan Pickup

1 Answer

HIGH IDLE AFTER HAVING NEW TIMING CHAIN INSTALLED,ALSO TAPPING NO


Hi,I have a 85 nissan 720 4x4 2.4 with a Weber carb,never had to mess with the timing chain,but I do have another engine in it.These trucks have carb, issues,I got rid of my stock carb,couldn't do nothing with it,dealer said they were junk,so I put a Weber on it and it is so awesome now.The valves should be adjusted when the engine is hot.Could be the person that put the new timing chain in did it wrong.Here's a video I did after I installed the Weber carb.I never had a issue with having to adjust the valves.My old carb at the end would always idle high.The timing might not of been set right with the new timing chain.I have the factory repair manual I bought from the nissan dealer.I've had my Truck since 92,it's mint,speedo has 343,000 miles on it,Jasper engine has 53,000 miles on it,transmission is a remanufactured one,it has 3000 miles on it. 85 Nissan 720 4x4 2 4 Weber conversion Here's the carb I put on it.Here's a cool Nissan 720 site to join,it cost 5 bucks,I am a member,it's like a forum where 720 owners react with helping each other,you have a page where you can post pics of your ride and you can see other peoples 720's. http://720world.com/Weber Carb Conversion fits Nissan Pickup 83 86 Z24 Electric Choke Weber...

Jul 07, 2017 | 1984 Nissan Pickup

1 Answer

Wont start


May have put the battery in backwards. I did the same thing.

Sep 08, 2008 | 1984 Nissan Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

723 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...