Question about 1995 Oldsmobile Achieva

2 Answers

Brake lights and turn signals are not working

Bulbs are good, emergency flashers work.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 701 Answers

Hello jimijam6627: There is a way to try and isolate the turn signal switch as the problem. engine can turn on the 4 way flashers. Step on the brake pedal. If the flashers continue to work with the brakes applied then the problem is the multi function switch. Please rate the answer as it does help. Thank You for using FixYa. Roger.

Posted on Apr 16, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 145 Answers

Sounds like a bad combination switch, available through most after market suppliers

Posted on Apr 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1987. Why is there no power at the turn signal cam?


Do you have brake and parkng lights? The turnsignal switch on the column is just designed to relay a path to the flasher and then it is designed to interupt the brake and some of the parking lights lights, which cause the flashing on and off. Double check fuses double check bulb socks and bulbs for good contacts. Does the 4 ways work? If the lights all flash then locate the turn signal flasher and switch with emergency flasher if possible to rule out relay. If those are all good and the emergency flasher lights work and bulbs, then you would have a problem with the turn signal switch. Hope this all helps

Feb 22, 2016 | Ford E-150 Cars & Trucks

1 Answer

I have a 2003 S10. My rear turn signals work, emergency flashers work, and my 3rd brake light works, but my tail light brake lights don't work. What do I do?


Check for power and ground to the lamps. Most likely you have lost ground, since you replaced everything else.

Sep 09, 2014 | 2003 Chevrolet S-10

3 Answers

1994 Chevy C1500 truck. No rear brake lights


Most likely this is a brake light switch issue. Replace switch.

If your emergency flashers don't work, all flasher bulbs are fine, but flashing too fast, then check and replace Hazard light switch.

Oct 29, 2012 | 1994 Chevrolet C1500

1 Answer

1989 chevy 1/2 ton.brake lights or emergency flashers dont work.tail lights an blinkers work.


The Blinkers and the Brake Lights are the same bulb. So check the brake light switch. Flashers use a different flasher unit, than the turn signals

Dec 16, 2009 | 1989 Chevrolet K1500

1 Answer

Emergency Flashers totally out, Rear lights malfunctioning


Check the ground on the passenger side rear lights, it's likely bad. As for the hazards, sounds like a bad flasher or fuse.

Sep 03, 2009 | Ford Super Duty Cars & Trucks

2 Answers

Rear brake lights stopped working


Check your fuses of course,you probably did.Listen your not going to believe this,the wire at the brake light switch can be bad.sometines the wire can break inside the vinyl cover just a milameter.use a test light for presence of voltage at the switch and check a few inches back to see it voltage is present. MAKE SURE YOU HAVE VOLTAGE AT THE SWITCH!

Jul 23, 2009 | 1992 Cadillac Eldorado

1 Answer

1997 Chevy Tahoe both turn signals stopped working


Sounds like the flasher unit to me. Normally the emergency flasher and turn signal are separate.

Jul 21, 2009 | 2001 Chevrolet Tahoe

2 Answers

Turn signals dont work bulbs/fuses are good.


check to see if the emergency flashers work if they do its its either a wiring problem, bulb, or socket the bulb fits in. if it does not work than the flasher is the problem. it is located underdash on driver side in the kick panel( to left of the brake pedal) it is a blue or grey sguare relay looking plug. if it is factory flasher it will say flasher with the part # on it. it should also say toyota on it. good luck

Jul 09, 2009 | 2000 Toyota Camry

1 Answer

Signal and emergency ligths stop working


I would check the bulbs, first with just parking lights on - making sure all light - then to see if brake lights work.

If brake lights work, check you parking/signal lights, as they may be of the "two filament" variety. If this is the case, and they are not burned out, check to make sure that the FLASHER module works and that the button for the EMER FLASHER works.

If either is not working, neither will your turn signals, as they depend on the flasher module.

Good luck !!

Aug 13, 2008 | 1994 Ford Aerostar Extended

Not finding what you are looking for?
1995 Oldsmobile Achieva Logo

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...