Question about 1991 Jeep Wrangler

1 Answer

My 91 jeep won,t start.I had it in a shop they (scoped it)and proceded to simply replace everything.from spark plugs to the cap rotor, wires you name it.So I have spark to #2 cylinder but to no other. The mechanic finally decided it was the computer,he told me the computer runs the timing and that I should buy acomputer and plug er in.they cost 500 bones and I hate flushing my cash.can you guys help?

Posted by on

  • 2 more comments 
  • shanehedley4 Apr 16, 2009

    4.0 litre

  • shanehedley4 Apr 16, 2009

    Thanks I will check that,this website is a nice find

  • Richard Scordino May 11, 2010

    Has anyone checked that a proper signal is coming from the distributor? If not the stator inside may be malfunctioning and only triggering spark @ #2. Exactly what was replaced already (no etc....everything.)

  • Richard Scordino May 11, 2010

    Which engine?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 25 Answers

Go to a juck yard there 50 to 100 bones

Posted on May 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jeep 95 wrangler power to coil no spark changed wires cap coil need help never gave me a problem before won't sart checked ground everything looks good


Remove distributor cap have someone tap the key while you watch the rotor inside the distributor if it does not move that is the problem then it could be the gear shear pin has broke or cam is not turning distributor.

Sep 23, 2012 | Jeep Cars & Trucks

1 Answer

My 1994 Jeep grand cherokee won't start. It tries to start but doesn't. Tried replacing cap and rotor and still will not start. When I checked the spark it was yellow. What does that mean?


Yellow means weak spark should be blue check the coil tower where the coil wire attaches on the coil for corrosion. Also check the spark plugs for wear.

Feb 03, 2012 | 1994 Jeep Grand Cherokee

1 Answer

Had a friend change my water pump and belt in my 91 cherokee and its still not turning the rest of the way.Sounds like its outta gas but its not.Is it the timing?


was it running before the work was done .if it was it has to do with your rotor cap ,spark plug wires rotor button and spark plugs change out and see what happens good luck

Feb 12, 2011 | 1991 Jeep Cherokee Limited

1 Answer

I have a 1994 Jeep Grand Cherokee Laredo 6 Cyl. The vehicle was kind of running rough on idle. Take in consideration that I have replaced the spark plugs, spark plug wires a while ago. So I decided to...


CHECK ASD RELAY THAT IS AUTOMATIC SHUTDOWN RELAY IN THE POWER DISTRIBUTION CENTER UNDER THE HOOD IN ENGINE COMPARTMENT.IF ASD RELAY GOOD PROBLEM COULD BE CAMSHAFT SENSOR IN THE DISTRIBUTOR.TO SAVE TIME AND MONEY HAVE JEEP SCANNED FOR CAMSHAFT SENSOR AND CRANKSHAFT SENSOR FAULTS.

Apr 23, 2010 | 1994 Jeep Grand Cherokee

2 Answers

91 jeep no spark


wd 40 your flywheel sensor plug

Sep 02, 2009 | 1996 Jeep Grand Cherokee

1 Answer

Turns over fine, I replace spark plugs, wire rotor and cap but still fires whenever it want. I performed the secondary spark test and I had no spark. Later I tryed again and starts perfectly. I don't know...


it sounds like your crank positions sensor is going bad, take it out and clean it up and then see if it works, you might have to replace it but try to clean it first.

Jul 05, 2009 | 1988 Jeep Cherokee

2 Answers

Diagram for 91 jeep cherokee plug wires


For a 4 the firing order is 1234 front to back and the distributor fires clockwise. Find one and run wires from there.

For a 6 its 123456 front to back and is also clockwise.

Joel

Dec 27, 2008 | 1991 Jeep Cherokee Briarwood

Not finding what you are looking for?
1991 Jeep Wrangler Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...