Question about 2001 Chevrolet Tahoe

1 Answer

Need to repair passenger side window--2002 Tahoe. How do you remove door panel?

Posted by on

  • titzlerm Apr 17, 2009

    Thank you! I have succeeded in getting door panel off and now the job at hand is repacing window regulator.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 57 Answers

Take every crew that you see on the door panel out. (the arm rest screws) and when you have done that there are just plastic clips on the back holding the panel on just be careful pulling on the panel because the clips like to break.

Posted on Apr 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Passenger side power window inoperable on my 2003 Tahoe


If you have checked all the fuses and for unplugged connections of frayed or damaged wires, the next step would be to remove the drivers door panel, carefully, and check for voltage at the switch. If it is okay, and the switch is okay, remove the door panel on the Passenger side, check for voltage at the regulator motor while pressing the switch. If it is present, replace the regulator.

May 13, 2011 | 2003 Chevrolet Tahoe

1 Answer

Ive got a chevy tahoe 2002 and the passenger side window wont roll up all the way. When i get it up all the way it slides down about 4 inches


Assuming you have power windows. Had similar problem on 2000 Buick LaSabre. Had to replace electric motor drive assembly inside of door. The motor moves a steel cable around nylon/plastic pulleys. In time the cable cuts into the pulley. Access motor assembly by removing inner door panel. I had to purchase assembly from the dealer ($$$). Digital snapshots as you disassemble will help you reassemble. Job took about 1.5 hours, and I had never done it before.

Feb 20, 2011 | 2002 Chevrolet Tahoe

1 Answer

Passenger side window stop working all of a sudden. You can hear it clicking, but it will not roll down.


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and you should be able to see everything. Your regulator may be bad or the window's caught on somethign

Oct 08, 2009 | 2003 Chevrolet Tahoe

1 Answer

Tahoe passenger door won't open


remove vertical screws from arm rest. ther may be other screwscovered by plastic caps. pull small triangular cover at top near dash covering mirror mounting bolts. pop window and lock switches up and out of the door pannel and be carfull when removing electical connections from those switches. then pop plastic panel around inner door handel out and turn to free from handel. Now u can start to remove the door panel. U can by a special tool at your parts store to pop the clips on the inside of panel or just pull it off starting from the bottom and working yourwhay around the sides and up to the top. then push upwards from the bottlm and the top lip should pop free of the door.
hope this helps

Aug 09, 2009 | 1998 Chevrolet Tahoe

1 Answer

How to replace the front passenger window motor after I have the door panel off on a chev 2001 tahoe


you have to completely remove door panel. make sure all switches are disconected. and its tricky ti get hands in but it can be done.

Aug 07, 2009 | 2002 Chevrolet Tahoe

1 Answer

2002 Cougar passenger side window switch - remove & replace


remove the door panel switch comes off from inside

Jul 23, 2009 | 2002 Mercury Cougar

1 Answer

Window on passenger side will not come down need door panel instructions.


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

May 31, 2009 | 2002 Lincoln Continental

1 Answer

02 tahoe, left rear passenger window has fallen down.


it has jumped off track to fix this you need to take the door panel off and put it back on track

Apr 11, 2009 | 2002 Chevrolet Tahoe

1 Answer

Replace Passenger Side Mirror on 2002 Ford F-150


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Mar 27, 2009 | 2002 Ford F150 Regular Cab

1 Answer

No power on front passenger door


Check the connections between the door and the body, not the panel on the door. If a wire was pinched between the door and body that could be the problem. There should be a boot between door and body, peal that back and look for damaged or grounded wires. Repair as necessary.

Joel

Feb 20, 2009 | 2003 Chevrolet Tahoe

Not finding what you are looking for?
2001 Chevrolet Tahoe Logo

317 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...