Question about 1994 Chevrolet K2500

1 Answer

Low clearance in from on vehicle......

Hi, i have a Chevrolet Cheyenne K2500....it is a work truck.....so it has very litle clearance in the front axle....diferential...you..know...

and i wonder if "TURNING THE "TORSION BARS" WILL HELP A LITTLE......I WANT TO GET 2 INCH LIFT..AT LEAST.....

will this help? plx answer...! XD

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 122 Answers

To my way of thinking, turning the torsion bars will only lift the body....if I wanted more clearance on the axle and the differential, I would put taller and bigger tires on the front end to give more clearance on where you want it.....

Posted on Apr 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bracket by the power steering reservoir on 89 chevy 2500 cheyenne broke when belt jumped off


Hi Kitty,here's a link to the power steering parts,these are what parts the GM dealers have available for the power steering pump,if your's is not there,then you will need to call the local junkyards to see if they have one has one and keep the broken part to match up.Other years and engine sizes might be the same. STEERING PUMP HOSES for 1988 Chevrolet K2500 Pickup

Jul 04, 2017 | Cars & Trucks

1 Answer

My stop hazard fuse keeps blowing on my 95 chevrolet k2500 Cheyenne. I do not have cruise control. i have disconnected the break relay and my turn/hazard switch. It still blows, yet when i unplug my break...


check the AMPS for all your fuses sometime a low amps fuse in the wrong slot can blow otherones. also sometime you can increase the fuse that keep blowing. try that first if that do not work you might need to run and electrican test on your fuse box to check if you have a short. also check your fuseable link on the fuse panel under the hood.

Nov 13, 2010 | 1995 Chevrolet K2500

1 Answer

New battery, new alternator, new starter, still won't start, 1994 chevy cheyenne 5.57 v8 ck2500


Get a fuel pressure gauge and measure on the fuel supply line on the rear of the inlet manifold. In my experience you need close to 4Bar while cranking. Priming pressure should be about 4.4Bar. This test will eliminate a variety of possible problems. I need more history to be more specific.

Oct 09, 2010 | 1994 Chevrolet K2500

1 Answer

Rear drum brake to disk brake conversion


Disc brakes on rear when OEM is drum may cause over breaking of rear axle when bed is empty on less than desire traction conditions are present.

Jan 28, 2010 | 1994 Chevrolet K2500

2 Answers

Need Rear Brake Diagram for 1994 Chevy K2500 4x4


Here is the diagram,It is always a good idea to only disaasemble one side so you can use the other side as a reference,I also reccomend using a set od brake pliers,they will the disassembly and reassembly much easier.
0900c1528008f6a2.gif

May 30, 2009 | 1994 Chevrolet K2500

1 Answer

I am going to install a new car stereo/cd player system. but my car wanst equip with one already. and i need a wiring diagram to try to sort out the wires and to know which goes were and why... can i get a...


All you need to do is go to the parts store, and get a wiring kit for your vehicle. It will plug into the factory harness, and the colors on the new pigtail will be same as the aftermarket c/d player. Hope this helps.

Mar 24, 2009 | 1994 Chevrolet K2500

2 Answers

Wire schematics for a 1995 chevy cheyenne 2500


You only have a few choices. Buy a repair manual at a parts store. Go online and google wiring for your truck and you might find it posted for free. Go to Alldata .com and pay for the info you need or ask nicely at a repair shop or dealer that can print off the required info.

Mar 12, 2009 | 1995 Chevrolet K2500

1 Answer

Brake shoe positioning on -88 K2500


Short shoe goes towards front. Also: check for any contamination on shoes or hardware from either axle seal or wheel cyls. Any contamination will make vehicle pull when brake applied. Technically, if contaminated shoes need replacement but if not heavy, on new shoes I usually just give a light sanding on friction material and the remainder will usually burn off.

Feb 12, 2009 | 1988 Chevrolet K2500

2 Answers

Clicking noise coming from under the passengers side.


Probably the vent door actuator......
Vent doors are controlled by small elect. Motors.

Feb 10, 2009 | 1994 Chevrolet K2500

Not finding what you are looking for?
1994 Chevrolet K2500 Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...