Question about 1999 Pontiac Grand Am GT

2 Answers

Engine 3.4L Pontiac Grand AM 1999, Looking to fine out what is the name of Water Pump Pressare release Valve to bleed off air from the line of coolent on the Water Pump

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

For a 2002 Pontiac Grand AM SE (with 3.4L V6) the correct General Motors Part Number is 10070107 and they describe it as an "Engine Coolant Air Bleed Valve". If you're a dumb*ss like me who dropped the part into the grass and you need another, you have to go to the dealership to get one and it will set you back around $11 to $12. Hope this information helps!

Posted on Apr 21, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,201 Answers

Coolant air bleeder valve is what I've always known it to be.

Posted on Apr 16, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the bleed valve located on a 1998 pontiac grand prix 2.8 engine? The auto parts store has never heard of a bleed valve.

Was the thermostat changed? I would suggest replacing the thermostat refill the system with new coolant and purge the air out of the system.

Mar 09, 2012 | Cars & Trucks

2 Answers

I ran my 2000 Pontiac Grand Am out of gas and now won't start. Put 4 gallons of gas in it. Fuel pump turns on with key. Don't know where the filter is...

not the filter that iam sure off ,try bleeding the fuel rail where the injectors are is a valve on the end of the supply line ,it looks like a car tyre valve take the cap off and turn ignition on and push the end in with a matchstick and you will release any air then try it but it should self bleed but we all know that in theory and practise it doesnt all work

Feb 10, 2011 | Pontiac Grand Am Cars & Trucks

1 Answer

I ran out of gas, I tried to pump the air line by pushing in the knob valve to release the air in the gas line, not sure if this is the right valve, it's a 2002 grand am, do you have a picture where the...

Just turn the key on, wait for a few seconds, turn it off. Turn it on again, wait for a few seconds, and repeat this about 5 or six times. Then turn the engine over and see if it will start. When you first turn the key to the "run" position, you should be able to hear the fuel pump cut in for a couple of seconds, and then stop. Listen at the gas cap if you can't hear it from leaning under the car.

Jan 09, 2011 | 1999 Pontiac Grand Am GT

1 Answer

Cooling system airlocked

Airlocked? Often by pulling a line of an air buble will be relased. moving hoses so they can fill with water and the air can pass works too. You did not mention the engine you have. Mine is the 2.3, when I drained, flushed and refilled the system had no major problems. there is a air bleed line from the water outlet (under ps pump, left side of engine) to the plastic bottle, right front. the restriction is in the niple at the pastic bottle is it pluged preventing the air to bleed? I always drill a 1/16 hole in the flange of a new thermostat when replacing it, that helps the air to escape and the system to better fill. The thermostat is on the return to the engine, water pump inlet, under the exhaust manifold (not a great design)

Nov 13, 2010 | 1995 Pontiac Grand Am

2 Answers

What line are you suppose to let bleed when you change the water pump

If it has a bleeder it will be on the thermostat housing or on a coolant tube that run's along the front (side) of the engine by the valve cover.

Jun 28, 2010 | 1999 Pontiac Grand Am GT

1 Answer

Where is the radiator bleed valve located on a 1997 pontiac grand prix

looking at the car its on the bottom right corner facing the engine looks like black wing nut turns out counterclockwise

Jun 20, 2010 | 1999 Pontiac Grand Prix

1 Answer

Location of radiator bleed valve on a 1999 pontiac grand prix.

Looking at the engine from the front of the car, on the LH side there is a black pipe that comes up from the water pump housing and on top of that is a small screw that will bleed the air in the coolant system.

May 29, 2010 | 1999 Pontiac Grand Prix

1 Answer

I ran out of gas, gasline is air locked help

on the to of the fuel line the is a valve plug look like a tire air valve take a small screw driver and push the pin to release air turn vehicle a few second to activate fuel pump then start vehilce

Jul 01, 2009 | 1999 Pontiac Grand Am GT

Not finding what you are looking for?
1999 Pontiac Grand Am GT Logo

Related Topics:

254 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides