Question about 2000 Dodge Durango

1 Answer

Need to change AC Resistor in 2000 Dodge Durango

I need to change the AC Resistor in my 2000 Dodge Durango but I can not find where it is located. The only information I have found online is for a 2001 and nothing in those pics look anything like the way mine looks like. I have looked all over under the dash on the passenger side and nothing.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 6,674 Answers

Look on passenger side under dash area, where housing & floor meet, just about dead center. Blower should be right of where you'll see harness going to the resistor

Posted on Apr 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the heater resistor on a 2005 dodge dakota? Behind glove box?


should be just above the blower motor. You will need to remove the glove box door to gain access.

Dec 12, 2015 | 2005 Dodge Dakota Club

1 Answer

1999 dodge durango front blower on Ac not working rear is working fine


I think the front resistor is right at the base of the windsheild under the cowl ...take off wipers, cowl. and underneath you should see an access

Jul 04, 2014 | 1999 Dodge Durango

1 Answer

2000 durango blower


The blower motor is located under the passenger side of the dash. there should be power on the dark green wire at the blower motor. If there is no power check the 40 amp blower fuse and the blower relay. If there is power than ground the light green with white wire with the blower motor plugged in. If the blower does not come on than the blower is bad. If the blower comes on than you have a ground issue. The system is ground side controlled which means the switch provides ground. If the blower does not work on high I would suspect the ground wire is burnt on the backside of the switch since high speed bypasses the resistor.

Apr 30, 2013 | 2000 Dodge Durango

2 Answers

Hello i have a 2000 durango 4.7 and my ac only works on one speed. when i put it higher or lower it shuts off. do you know where my resistor is located. i keep hearing different areas


Hello John---On the 2000 Durango the resistor should be directly underneath the passenger side glove box. So if you look directly up from underneath the passenger floor, you should see the long skinny rectangular wiring harness with one -8mm screw on each end...A 1/4" drive ratchet with extension and swivel joint will make it easier to reach and remove. A new resistor is a dealer item only i believe, that costs about $18...I hope this helps...good luck with your Durango.

Jul 12, 2011 | 2000 Dodge Durango

1 Answer

2000 caravan,need location of rear ac blower switch resistor.


i had the same problem last year with the same model, what you need to change is the blower motor resistor/power module. this is located under the hood on the passenger side right on the core housing. i used a flat screwdriver to pull it out. you will get a better idea of the part to change when you get a new one. inspect the old one and for sure you will see that the wire type connection inside is burnt and or corroded. Enjoy !

Jul 02, 2010 | 2000 Dodge Caravan

1 Answer

2000 dodge durango with 5.9L. AC compessor clutch smoked, but still turning and AC still cold. Is the clutch assembly available seperate from the compressor and how difficult is this to change by average...


Yes the assembly is available but you will need a clutch pulling and a clutch installing special tools. They might be rentable, if not I dont think they cost alot.Its not a bad job.
You might want to read up on the job.Dont forget the gap spec.

Sep 21, 2009 | 2000 Dodge Durango

1 Answer

The AC stopped blowing through my front vents but blows through the rear AC. The compressor is working fine but it seems like the front vent system is not ducting the AC through.


replace the blower motor resistor located on the passenger side were your toes point there are two 9mm screws you will need a universal joint socket to remove the back screw drop down the resistor and remove the red saftey clip and press together the two black pieces together and pull apart. If the problems happens again you will have to replace the resistor again and also replace the blower motor because the blower moter is woren and drawing to many amps. The blower has three 9mm screw and one wire harness. I purchased all my parts thru Rockauto .com

Aug 17, 2009 | 2000 Dodge Durango

6 Answers

Replace durango blower motor resistor instructions


2003 Dodge durango, the blower motor stoppped came back on and stopped again and never came back on. I replaced the blower motor and still no air. Can anyone help?

Aug 01, 2008 | 2001 Dodge Durango

Not finding what you are looking for?
2000 Dodge Durango Logo

Related Topics:

291 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...