Question about 2002 Mazda Miata

1 Answer

Replace brake light

Need to know how to replace the brake light bulb on a 2002 miata

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Open the trunk and remove the carpeted panel on the opposite side of the light. This is easy to do. At the top of the panel there are small round plastic fixtures that pull out, no tool is needed. Once removed, take the panel out and you will see the bulb sockets. Locate the one that is out. Twist slightly and pull the socket out. You will then pull the bulb straight out of the socket and replace with a new one. Once new bulb is in the socket you can put it all back together and test the light.

Posted on Aug 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 pt cruiser--no brake lights--have tail lights--replaced brake light switch 3 times--brake lights work for about a week--ideas?


I would like to know if you have turn signals working in the rear. These are the same bulbs that brake lights use. If you don't have turn signals, then you need to replace the bulbs. If you do, then there is probably a wiring issue, or a circurt breaker problem. Hope this helps?

Aug 20, 2014 | 2002 Chrysler PT Cruiser

1 Answer

Hi I have 2002 Lexus RX 300, no brake light warning, all 3 brake light off, all fuse and light bulbs ok, have battery voltage at the fuse block both sides, good ground at brake light bulb, but no no...


Have you checked the switch on the brake pedal?
Need to find out if computer is part of brake light circuit if everything else is working.

Sep 14, 2017 | 2002 Lexus RX 300

1 Answer

What bulb do i need to replace in order to fix the rear brake light


automatic answer would be the rear brake light bulb. So much for being funny. Look at the bulbs the bulb that you will want to replace with have 2 elements inside the bulb. The single element bulb is for your tail lights.

May 03, 2010 | 2002 Oldsmobile Silhouette

1 Answer

Why rear brake lights not working on 1990 Mazda Miata? Fuses and bulbs are good. Was blowing fuse for dash and parking lights prior to brake lights becoming inoperable,


You'll have to inspect the brake light switch at the pedal box assy. Damaged switch or wiring could give the previous symptoms you describe.! Good luck

Apr 02, 2010 | 1990 Mazda MX-5

1 Answer

Brake light bulb replacement for 2002 jeep grand


After removing the 2 expose screws. You will need to carefully & firmly rotate the assembly away from the vehicle until it releases from the ball pin socket that holds it in back.
The unit contain 3 same exact bulb type, can be removed by turning them counter-clockwise 1/4 turn.

Jan 21, 2010 | 2002 Jeep Grand Cherokee

2 Answers

2002 Toyota highlander passenger brake light not working


RE: 2002 Toyota Highlander 2.4cyl. 4X4 Base Model

I am a Certified Technician and have basic knowledge with electronics in electrical wiring. I searched the web and discovered this is a common problem.

I fixed the problem and it was a simple procedure... The problem is with the reverse light socket at the side with no brake light. This socket functions as a hub to direct current to the brake bulbs.

Remove reverse light socket and re-seat bulb. Check for loose or broken prongs. Replace if necessary.

Swap the reverse socket with the other side.

Oct 06, 2009 | 2002 Toyota Highlander

1 Answer

Right brake light is out and don't know which bulb to change


Have someone apply brakes. Observe which bulb lights in the left light housing. This is the bulb you want to replace.

May 07, 2009 | 2002 Jeep Grand Cherokee

1 Answer

Engine light on...now brake light on and will not go off


Dear Debra:

Your vehicle’s computer system has self-testing capability. When the computer senses that there is a problem with some of the components it stores the correspondent trouble code(s) in its memory and lights up the "Check Engine" or "Service Engine Soon" light to tell you that there is a problem and you will need to have the car diagnosed and repaired. The red brake light comes on for two reasons, the fluid level is at the minimum level or the parking brake is engaged. Take it to a service center you trust and let them inspect it very soon, brakes are a safety issue. Hope this helps you.

Nov 19, 2008 | 2002 Mazda Miata

4 Answers

1990 Mazda Miata, Tail lights, Interior lights not working! :\


I have a problem with my tail lights in my mazda. Brake lights working great but the light that supposed to be working during night time are not. By the way the front lights are working too! Also the light of the panel inside is not working. Can anyone please tell me how to fix it?
Thanks alot in advance!

Sep 06, 2008 | 1990 Mazda MX-5

Not finding what you are looking for?
2002 Mazda Miata Logo

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...