Question about 1999 Dodge Intrepid

2 Answers

ABS LIGHTS I deive a 98 dodge dakota 3.9 and my abs light is on also the break light it on. the breaks work ther new pads and new fluid but light is still on. whats the problem fuses are also good

Posted by on

  • Anonymous Mar 14, 2014

    ABS light on and off but the break is working good

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,011 Answers

Your rear abs sensor probably is bad this will turn on both lights. the sensor is located on the pumpkin in the rear axle assembly.

Posted on Apr 16, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 150 Answers

Unplug the abs control module and check for water in the connector

Posted on Apr 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1.Why is my break light indicator on dashboard on even when break is not engaged.Note,my break is active and fluid level is ok. 2. Why is my ABS light on and refused go off from dashboard.


Not sure about the Honda setup, but when my Dakota had those lights both lit, it was a bad speed sensor in the system. I had the additional symptom of no speedometer reading until about 30mph.
It seems that the VSS in my system was used at lower speeds by the ABS system to determine when to activate. If the ABS light goes on, many vehicles will also activate the brake light since the two are undoubtedly related.

Dec 10, 2015 | 2003 Honda Accord

1 Answer

Break lights on


Check the abs module for trouble codes. You will need a high end scan tool or a specific abs code reader to do it. The brake light is on likely because the abs light is on. The airbag light might be a different story. Does the horn and cruise work?

Jan 23, 2012 | 1999 Dodge Caravan

2 Answers

My ABS light came on in my 99 honda accord what does it mean?


Normally when your abs light comes on, that is referring to your breaks. This could be low break fluid, leak in break hose somewhere, or need breaks checked. Most cars now a days, have a sensor that is part of and hooked up to your breaks, and that will trigger your abs system (which is breaks) and let you know if your pads are low, or to the ware mark. So Here is what you first do, is check your break fluid and make sure that resavor is full, check under car to make sure there is no leaks, under car and inside each wheel area where breaks are, and then next step, is Les Swab can check your breaks for free and let you know if your pads are down to the ware mark. Let me know, Mike

Sep 14, 2011 | Honda Accord Cars & Trucks

1 Answer

I have a 98 dodge durango 4wheel drive 5.2 v8.. breaks are getting hot and wearing out the rear pads. rear have drum front have disk. all 4wheels are getting hot. new everything all the way around.pads,...


check the abs fuse to see if it as blown they system may just be putting more pressure on different parts at differnt times because it is not getting proper control, also if the breaks are new you might consider using a dab of break cement on the back side of the pads and shoes to allow for proper release from the drums/rotors.

Jun 30, 2011 | 1999 Dodge Durango

1 Answer

The ABS light comes on in my 1997 dodge ram van and I have no troubleshooting info. Also I need to know the location of the control module.


Hello,
Here are a few common causes for the ABS, ( Anti-lock Breaking system ), light.

1. Check brake fluid level, sometimes this can trigger the light.

2. When your brake pads get worn down, this too can trigger the ABS light.
Often new brakes will correct the problem.

The control module, ( onboard computer system ), is generally located near the front of the engine compartment. Most have a large plug with many wires.

I hope this helps.

Feb 16, 2011 | Dodge Ram 1500 Cars & Trucks

1 Answer

ABS and brake lights come on and off on my 2004 dodge 25004x4 pickup


Sometimes this can happen when your break fluid is low, so I would double check that first, but usually if the ABS and Brake warning or flashing, or staying on, you are in need of break service on your vehicle. It may only need new brake pads, but you should get it checked as soon as you can.

In the meantime, try to stay mindful to give yourself extra distance for stoping.

I hope this helps.

Jan 29, 2011 | 2004 Dodge Ram 2500

1 Answer

MY BREAK AND ABS LIGHTS KEEP COMMING ON.


It could be the ABS unit it's self that is at fault

Mar 18, 2010 | 1994 Ford F150 Styleside Supercab

1 Answer

I have a 1997 Dodge Dakota who ABS light and Brake


when brake light is constantly on it normally means the rear brake light dont work (bulb blown) ABS normally means sensors pushed too far or teeth on abs cv axle could be damaged or bent. check that first.

Jun 16, 2009 | 1999 Dodge Dakota

1 Answer

Speedometer won't work


IT SOUNDS LIKE YOU HAVE BROKEN WIRE LEADING TO SPEED SENSOR IN REAR DIFF..CHECK FOR ANY SPOTS IN HARNESS WHERE IT LOOKS OUT OF PLACE OR RUBBING ON SOMETHING..ALSO CHECK FOR SPREAD CONNECTIONS IN PLUG AT SENSOR..CHECK ALL FUSES RELATED TO ABS SYSTEM IN UNDERHOOD FUSE/RELAY CENTER

May 28, 2009 | 1998 Dodge Dakota

Not finding what you are looking for?
1999 Dodge Intrepid Logo

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...