Question about 2005 Dodge Caravan

1 Answer

Need to the torque for the oil pan for a 2005 dodge caravan with a 2.4 engine

Posted by on

  • yadayada
    yadayada May 11, 2010

    tighten evenly in an X pattern.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 701 Answers

Hello rkz3: The correct torque specs for the oil pan is 105 inch pounds. Should you need further help just ask.Thak you for using FixYa. Please rate the information as it helps a lot. Thank you again Roger

Posted on Apr 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tighing sequence for oil pan on 96 Dodge caravan


Note the picture. That is for 3.0L,but, the other engines should be about the same. The actual torque spec is in inch lbs depending on engine size
25661956-chr4ovfijeufamn1wbyoau23-5-0.jpg

Apr 23, 2015 | Dodge Cars & Trucks

1 Answer

How to replace oil pan gasket dodge caravan 2005 3.3l


jack up on jack stands, drain oil, remove all pan bolts, clean pan, use new gasket, replace bolts to torque specs do not over tighten it will tear the gasket. DO NOT USE GASKET SEALER OR PERMATEX IT MAKES GASKET SLIP

Mar 09, 2015 | 2005 Dodge Caravan

1 Answer

How much trans fluid needed after filter change on 1997 dodge caravan


My 1997 Caravan manual states that the trans fluid capacity is 8.5 quarts. However, in the transmission oil change section, it says to drop the pan, drain the oil, replace the filter and add 4 quarts of new fluid. This tells me that the torque converter is not draining so you are in fact, only changing "half" of the transmission fluid.

Oct 07, 2010 | 1997 Dodge Caravan

1 Answer

Oil pump ,,,where is the oil pump located on a 1997 dodge caravan


Hello
Welcome!
Oil pump is located on the oil pan.
Parts needed,,,oil,,,, oil filter,,,, oil pan gasket,,, oil pump,,,, oil pump pickup tube..
time to do this,, about 3 hours
Instructions,
Raise van place on 2 jack stands
drain oil remove oil filter fill new filter install.
remove bolts from oil pan,
remove oil pan..
remove 2 bolts that hold oil pump and tube.

install new pump and tube tork bolts to 45 fp
replace oil pan gasket and install oil pan
tork pan bolts to 35" pounds
install drain plug
fill with oil
start and check for leaks

let me know if i can help more

Jul 17, 2010 | 1997 Dodge Caravan

1 Answer

How to change oil pan gasket for 2005 dodge caravan


Caravan, Grand Voyager, Town and Country, Voyager, 2000-2004

Oil Pan - Removal & Installation

2.4L Engine
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Drain the engine oil.
  3. Remove or disconnect the following:
    Negative battery cable Structural collar A/C compressor bracket to oil pan bolt Oil pan
  4. Clean the oil pan and all gasket mating surfaces.
To install:
  1. Install or connect the following:
    Oil pan gasket to the block after applying engine RTV at the oil pump parting line Oil pan. Torque the bolts to 105 inch lbs. (12 Nm). Structural collar Negative battery cable
  2. Fill the crankcase to the correct level.
  3. Start the engine, check for leaks and repair if necessary.

3.0L Engine
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Drain the engine oil.
  3. Remove or disconnect the following:
    Negative battery cable Starter motor Front motor mount bracket Bending braces Torque converter dust shield Oil pan

    e6c7cfd.jpg
    Fig. Oil pan mounting bolt tightening sequence-3.0L engine

To install:
  1. Clean the oil pan all mating surfaces.
  2. Apply RTV gasket material to the oil pan.
  3. Install or connect the following:
    Oil pan. Tighten the bolts in sequence to 50 inch lbs. (6 Nm). Torque converter dust shield Bending braces Front motor mount bracket Starter motor Negative battery cable
  4. Fill the crankcase to the correct level.
  5. Start the engine, check for leaks and repair if necessary.

3.3L & 3.8L Engines
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Drain the engine oil.
  3. Remove or disconnect the following:
    Negative battery cable Engine oil dipstick Drive belt splash shield Strut to transaxle attaching bolt and loosen the strut to engine attaching bolts Transaxle case cover Oil pan fasteners Oil pan and gasket

To install:
  1. Clean the oil pan and all mating surfaces.
  2. Apply a 1 / 8 inch bead of gasket material at the parting line of the chain case cover and the real seal retainer.
  3. Install or connect the following:
    New gasket on the oil pan Oil pan. Torque the bolts to 105 inch lbs. (12 Nm). Transaxle case cover All bending brace bolts Drive belt splash shield Engine oil dipstick Negative battery cable
  4. Fill the crankcase to the correct level.
  5. Start the engine, check for leaks and repair if necessary.

Hope helps (remember rated this).

Jun 24, 2010 | 2005 Dodge Caravan

2 Answers

How to locate oil drain plug on 2005 dodge caravan sxt


easyest way to find it look under van. on the pan it will say dont lift it here. on side of that pan you will see a bolt thats a 17 mill rench

Apr 24, 2010 | 2005 Dodge Caravan

1 Answer

How do you remove the oil pan from a 1990 Dodge Caravan SE?


FIRST OF ALL REMOVE NEGATIVE BATTERY CABLE.REMOVE OIL DIP STICK.RAISE THE VAN SUPPORT IT USING JACKSTANDS.MAKE SURE YOU ARE ON HARD LEVEL GROUND.ALSO USE PROPS TO BACK WHEELS LIKE A LARGE PIECE SPLIT WOOD.THAT KEEP VAN FROM ROLLING BACKWARD WHEN YOU JACK IT UP.ALSO APPLY EMERGENCY BRAKES.NOW WITH VAN UP AND SECURE.DRAIN OUT ENGINE OIL.REMOVE ENGINE TO TRANSAXLE STRUTS IF EQUIPPED.REMOVE THE TORQUE CONVERTER OR CLUTCH INSPECTION COVER.REMOVE OIL PAN RETAINING SCREWS.AND REMOVE OIL PAN AND SIDE SEALS REMOVE ALL OLD GASKET FROM OIL PAN.CLEAN OIL PAN GASKET SURFACE AND CLEAN ENGINE SURFACE WHERE GASKET MEET.USE PAPER TOWELS AND ACETONE CLEANER IT WILL REMOVE OIL.YOU CAN USE BRAKES PARTS CLEANER ON OIL PAN.IT WILL REMOVE OIL QUICKLY.WHEN EVERYTHING IS CLEAN AND DRY.NOW APPLY SILICONE SEALER TO THE 4 ENDS SEAL TO BLOCK CORNERS AND INSTALL THE END SEALS MAKING SURE THE CORNERS ARE NOT TWISTED.THEN APPLY SILICONE TO THE 4 PAN TO BLOCK CORNERS.INSTALL A NEW PAN GASKET.INSTALL RETAINING SCREWS AND TORQUE THEM TO 17 FT LBS.WHEN YOU PUT EVERYTHING BACK IN PLACE DONT FORGET TO PUT OIL BACK IN ENGINE BEFORE CRANKING IT UP.WHEN CRANKING ENGINE UP GETTING IT RUNNING CHECK FOR OIL LEAKS.

Apr 18, 2010 | 1990 Dodge Caravan

1 Answer

What is the sequence for the bolts on oil pan, for 2000 dodge grand caravan? What is the torque for bolts for oil pan for 2000 dodge grand caravan?


For the 2.8L there is no sequence. Torque for the bolts are 105 in.lbs.

For the 3.0L torque is 50 in.lbs. in sequence:




40be0ec.gif

30fedd0.gif
For the 3.3L and the 3.8L, no sequence but torque each bolt to 105 in.lbs.

Please don't forget to rate!

Jul 12, 2009 | 2005 Dodge Caravan

1 Answer

Need to replace oil pump assembly


Remove the Oil Pump
1.
Step 1

Drive your Dodge Caravan up onto ramps or lifts so you have room to work as you pull out the oil pump. You could also use a jack, but make sure you brace the front wheels and engage the parking break so the car doesn't roll.
2.
Step 2

Disconnect the negative battery cable on your Dodge Caravan. Drain the engine oil and coolant into separate pans. Take the vehicle off the ramps or lifts. Remove the accessory drive belts and use an engine support tool to hold the weight of the engine.
3.
Step 3

Take out the right engine mount and bracket. Take off the timing belt cover and loosen the bolts on the timing belt tensioner. Remove both the tensioner and the timing belt then raise the vehicle back on the ramps or lifts.
4.
Step 4

Take out the oil pan assembly and remove the oil pump pick-up and the O-ring. Take the crankshaft damper out with a good puller. Use a puller to also draw the crankshaft sprocket from the front of the crankshaft.
5.
Step 5

Loosen the bolts on the oil pump and take them off. Remember where they were since you'll need to replace them later. Unscrew the relief valve.
Install the New Oil Pump
6.
Step 1

Clean all the parts to remove contaminants and debris then install the inner rotor. Make sure the chamfer faces the cast iron oil pump cover on the back. Torque the bolts to 105 in. lb.
7.
Step 2

Install the relief valve, followed by the spring, gasket and cover cap. The cover cap should be tightened to 40 ft. lb.
8.
Step 3

Fill the rotor cavity with clean engine oil to prime it then insert a new O-ring seal into the oil pump. Put Mopar Gasket Maker or equivalent anaerobic type gasket sealer on the flange of the oil pump body.
9.
Step 4

Align the oil pump rotor flats with the flats on the crankshaft and install the pump slowly, tightening the fasteners to 20 ft. lb. Add the new front oil seal and install it with the spring side facing the inside of the engine. Even it out with the engine cover.
10.
Step 5

Install the crankshaft sprocket with the special sprocket tool. Put on the oil pump pick-up tube and O-ring and torque the bolt to 20 ft. lb.
11.
Step 6

Insert the oil pan and install a new oil filter. Lower your vehicle then install the timing belt and covers and crankshaft damper with a tool specialized for the 2 mm by 1.75 by 150 mm bolt. Tighten the center bolt to 105 ft. lb.
12.
Step 7

Put on the accessory drive belts and adjust them to the right tension. Put on the engine mount and bracket then take out the engine support tool.
13.
Step 8

Add fresh oil to the engine and refill the cooling system. Use a 50/50 mixture of clean, ethylene glycol antifreeze and water in the cooling system. Start your engine and check for leaks.

May 21, 2009 | 2000 Dodge Caravan

2 Answers

Dodge 2005 Grand Caravan water Pump replacement


JUST COMPLETED THIS JOB TODAY. MAKE SURE THE ENGINE HAS COOLED DOWN . IT TOOK APPROX 2 1/2 HRS. DISCONNECT THE NEGATIVE POST ON THE BATTERY. JACK UP PASSENGER SIDE FRONT AND SUPPORT ON JACK STANDS. REMOVE PASS. FROUNT TIRE. DRAIN RADIATOR INTO CONTAINER FOR PROPER DISPOSAL OR REUSE. USING FLOOR JACK PROVIDE SLIGHT TENSION ON OIL PAN WITH A SHORT 2 X 4 WOOD PIECE TO PROTECT OIL PAN. LOOSEN 3 ENGINE MOUNT BOLTS ON PASS. SIDE OF ENGINE COMPARTMENT. ALLOW APPROX 1" BETWEEN SHOULDER OF BOLTS AND MOUNT. LOWER ENGINE UNTILL BOLTS ARE SET ONTO MOUNT. REMOVE ENGINE SPLASH SHIELD INSIDE WHEEL WELL OF REMOVED TIRE. LOCATE WATER PUMP AND LOOSEN 3 PULLEY MOUNTING BOLTS (THIS IS WHILE BELT IS ON PULLEY) REMOVE SURPENTINE BELT AND CONTINUE TO FULLY REMOVE THE PUMP PULLEY. IT WONT COME OUT AS THE PUMP & PULLEY HAVE TO COME OUT TOGEATHER. REMOVE 5 WATER PUMP BOLTS AND CAREFULLY WORK WATER PUMP OUT BETWEEN THE ENGINE AND VEHICLE FRAME. CLEAN ALL MATING/GASKET SURFACES AND BOLTS. USING A SMALL AMOUNT OF TACKY SEALENT TO INSURE THE NEW WATER PUMP SEAL STAYS IN PLACE, THE INSTALL IS PRITTY MUCH THE REVERSAL OF REMOVAL.

GOOD LUCK, REMEMBER TO TIGHTEN ALL BOLTS TO MFR SPECS AND BLEED THE AIR OUT OF THE COOLANT AS REQUIRED.

Mar 30, 2009 | 2005 Ford F-150

Not finding what you are looking for?
2005 Dodge Caravan Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...