Question about 2000 Ford Focus

1 Answer

What size socket id need to remove reher drum

What size socket would i need to use to remove reher drums

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 14 Answers

30" OR 32"

Posted on Apr 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2.4. What tools are needed to remove crank sensor?


This probably isn't what you want to hear? If your going to work on your own vehicles, you need a basic set of wrenches and sockets, standard and metric sizes.
My info says you need to remove starter in order to remove that sensor. I don't know correct socket size, you need a basic set of tools, if one socket is the wrong size, grab another one.
Also, You may need to do a variation learn procedure after you replace that sensor, I have no experience in that area, you may need a scanner?

Dec 23, 2015 | 2008 Saturn VUE

1 Answer

What size socket do I use to remove a front rotor?


You don't need a socket. The rotor is held by a torx flathead screw. I stripped mine and drilled it out. It is not necessary. Remove the brakes and this little screw from the rotor and it will come off. If it won't. you need to watch a you tube video about removing a stuck rotor. It is fairly simple. But hard to explain in words.

Jun 22, 2014 | 2006 Buick Lucerne

1 Answer

How do you change rear brake drum on 2002 dodge ram 3500 dually


you have to get under truck look for access hole at backing plate you need brake adjusting tool to turn adjusting star wheel until drum brakes away from brake drum so you can remove the brake drum.you need tools to remove rear wheel from drums you need a large breaker bar and large hammer and a large socket remove spindle nut.

May 18, 2013 | 2002 Dodge Ram 3500 Truck

1 Answer

What size star socket cavalier brake cylinder


If its the cylinder for the rear drum brakes and not the caliper bolt it is a e6 female torx socket or wrench that will remove the two retaining bolts.

Jan 07, 2013 | 1994 Chevrolet Cavalier

1 Answer

Brake drum removeal and size


The maximum machining dimension is cast into the surface of the drum. On disc brakes it is cast into the rotor. Using that information you can determine the correct shoes/pads for you vehicle.

To remove the drums you simply have to remove the wheel. If the drums have never been off before remove and discard the sheet metal nuts that are over the wheel studs. They are only there to hold the drums from falling off during assembly. After that you can pry on both sides with prybars or large screwdrivers against the drum backing plate to work the drum off. I might take some effort if the shoes have worn a groove into the drums.

Dec 19, 2012 | Cars & Trucks

1 Answer

How do I remove rear wheel bearings for replacement?


The bearings are pressed in. You can remove them yourself and it's about a 45 mins per wheel job. You will need a brass punch, hammer, tub of grease,block of wood, and a socket the same size as the bearing and a bench to work on.
Best to take the drum to a break repair place and have them remove them and press in the new ones.

Jan 10, 2011 | 1992 Toyota Tercel

1 Answer

Rear wheel bearing


if its like the 99 winstar:

safely support the van, remove rear wheel, remove brake drum, remove grease cap. remove caged locknut assembly (38mm socket i think.) then pull the hub assembly from the axel. you may need to cut away the inner race if the bearing falls apart. clean axel, apply alittle anti size compound, then push on the new hub assembly. tighten down the hub nut to specifications (should be on the leaflet in the new bearing package), install dust cap, install drum, install wheel, lower and drive :)

May 25, 2010 | 1998 Ford Windstar

2 Answers

How do you remove the rear brake drum?


Before you begin make sure your emergency brake is off.

1. Jack up the car and remove rear tires.
2. With a 13mm socket and ratchet remove the 4 bolts that are on the back of the hub assembly. (You will need an extension and a universal joint adapter)
3. Pull the drum off and the spindle will come off with it, giving you access to the shoes, wheel cylinder, hold down hardware, etc... (you may need to adjust your brake shoes so the drum will slide off easier.)

Do not undo the nut in the middle of the drum (under the dust cap) unless you absolutely need to turn the drum or replace the drum as the threads on the spindle are known to strip very easily. Should you need to take it off the socket for the spindle nut is a 30mm.

Jan 05, 2010 | 2001 Ford Focus

2 Answers

What size socket do you need to remove the rotor . i can take of calipers and the bracket that holds cailper to drum but what size socket do i need to get the big nut off with.


any sockets are going to be metric its either a 16 or 17 . Just try all till they fit snug and thats the one. Also a auto repair manual from chiltons , would give you more exact information on your vehicle.

Jul 10, 2009 | 2000 Kia Sephia

Not finding what you are looking for?
2000 Ford Focus Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...