Question about 2000 Dodge Caravan

1 Answer

Front wheel assembly o a dodge caravan

I need 2 studs replaced

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 73 Answers

Take the brake caliper off and rotor knock out the stud and get a stud installer at local parts store

Posted on Apr 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Broken front wheel stud 2003 grand caravan


jack up vehicle, remove tire. knock out old stud with a hammer and punch. put new stud in from back if need be. to draw it up tight.use a lug nut with something under it so when you tighten the nut it brings the stud into position. remove the nut you put on. and replace the tire. good-day! if the brakes and rotor are in the way. you will have to remove them to replace the wheel stud.

Mar 28, 2012 | 2000 Dodge Caravan

1 Answer

How to get drum pads off a 2000 dodge caravan


The pad drums of your 2000 Dodge Grand Caravan can wear with use. Heat buildup in the brakes can glaze, warp or crack the drum. If that happens, replacement of the drum is the only way to fix it. In most cases, you can remove the rear drums, replace them with a new set and leave the existing shoes on the van. Take a minute and inspect the brake shoes thoroughly while you have the drums off the van.


  1. Loosen the lug nuts on the rear of your 2000 Dodge Grand Caravan with a lug wrench. Do not take them off the wheel studs.
  2. Raise the rear of the van with a jack and support it on a set of jack stands. Place the stands under the rear suspension, making sure they are secure. Remove the lug nuts from the wheel studs and pull off the rear wheels.
  3. Check the rear drum where the wheel studs come through for retaining clips. These are used during the manufacturing process; and if they are still on your van, they need to be removed. Pry the clip off the wheel stud with a flat head screwdriver and discard them. Most vehicles will have two clips on each brake drum.
  4. Grasp the brake drum on the outer edges and pull it straight off the wheel studs and brake pads. Discard the old drum and slide the new drum into place, aligning the holes in the drum with the wheel studs. Push the drum in until it seats completely. Repeat the process on the opposite side of the van.
  5. Position the wheel back on the wheel studs and install the lug nuts by hand. Raise the back of the van with a jack and remove the jack stands from under the suspension. Lower the van to the ground and tighten the lug nuts with a lug wrench.

Jan 08, 2011 | 2000 Dodge Caravan

1 Answer

How do I replace a wheel stud on a 2000 dodge caravan? There is no clearance behind the stud plate.


If you can knock the old one out, get the new one in position, and do not mind destroying a wheel nut or two, I once watched a tire technician use a wheel nut , some washers, and an air gun with socket to pull the stud into position with air pressure.

Sep 09, 2010 | 2000 Dodge Caravan

2 Answers

2000 Dodge Caravan....broken wheel studs...


Yeah , it's a fairly simple repair, All the wheel studs must be replaced and lug nuts also.Closely examine the wheel or get competent tyre replacement company to double check for damage ! Remove the brake disc caliper and brake disc itself (usually 2 cross head screws) , tap off (gently) it may be stuck thru corrosion / rust etc , Broken studs can be knocked out(towards drive shaft ) of the hub assy with a suitable drift and hammer (splined into hub) . The studs are a servicable replacement part. Check all other wheel nuts as this is usually a result from poor fixing or wheel replacement recently .. Good luck

Apr 05, 2010 | 2000 Dodge Caravan

1 Answer

I need a diagram on front hub and brake assembly for 1999 dodge 1 ton dually 2 wheel drive. the front brake rotor is warped i need to replace it


8–Stud Rotor
  1. Raise and support the vehicle.
  2. Remove the wheel.
  3. Remove the hub extension.
  4. Remove the brake caliper assembly.
  5. Remove the axle nut cotter pin. Remove the axle nut.
  6. Disconnect the ABS wheel speed sensor wire from under the hood. Remove the sensor wire from the frame and steering knuckle, if equipped.
  7. Back off the hub/bearing mounting bolts 1/4 inch each. Then tap the bolts with a hammer to loosen the hub/bearing mounting bolts.
  8. Remove the bolts and remove the hub/bearing assembly.

Sep 16, 2009 | 2000 Dodge Ram 3500

2 Answers

How to replace rear wheel stud. 2003 dodge caravan


Should be a pressed in wheel stud, remove hub and have old one pressed out or you can do it the primitive way, by double nutting the old stud and striking it with a hammer to pound it out, if threads are bad then just strike the stud by itself , then replace new stud in opposite fashion...

Sep 15, 2009 | 2003 Dodge Caravan

2 Answers

Broken rear wheel stud how do i repair it


The stud has to be hammered out if you don't have the tools to do this then I suggest you take it to a tire shop they don't charge much. depending if it's front wheel or rear wheel drive will determine what has to be done. If it's a rear axle they will remove the tire and drum and knock out the old one with a hammer and punch and replace it with a new one same size, they can hammer it back in our use washers to pull it into place this is the same on the front wheel. You will need to measure the bolt to get the right length and width. tire shop will have the stud you need.

Sep 11, 2009 | 2002 Dodge Caravan

1 Answer

I need to replace a broken wheel stud but could not remove the drum in 2005 dodge grand caravan


get a 4lb sledge hammer and wack the outer face of the drum in a criss cross pattern being careful not to hit too hard or hit lug nut studs, use some liquid wrench around the studs before hitting to dislodge rust bond

Jul 02, 2009 | 2000 Dodge Caravan

1 Answer

2003 dodge Caravan FWD wheel stud replacement


I don't have a pic but there is usually not enough room to slide the stud out and in. However, we don't completely remove the hub assembly. On the back of the knuckle (item that the hub is installed into) there are 3 or 4 bolts that hold the hub. Remove these out about 1/2 an inch and you can slide the hub out just far enough to get the studs in and out. On some the outer cv joint is kind of in the way and you may need to remove the axle nut and push the axle in slightly in order to get a socket on the hub bolts. There isn't really any special tools needed but you have to make sure the new stud is fully installed (seated) otherwise the lug nut could back off. Hope this helps.

Jun 05, 2009 | 2003 Dodge Caravan

Not finding what you are looking for?
2000 Dodge Caravan Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...