Question about Chrysler Town and Country

1 Answer

Transmission with codes P0218 P0732 P0733 P0740 P0846 P1790

I replaced the transmission on my 2004 town and country 2wd 3.8L about 2 months ago, the other day I stopped at a light and the van wouldn't move RPMs went way up but nothing, I shifted it from park to drive to low gear a few times and eventually it kicked in hard and started driving fine now today it won't move at all and I got codes for P0218 High temp Operation activated, P0732 Second gear ratio error, P0753 3rd gear incorrect ratio, P0740 Tcc out of range, P0846 2nd and 4th clutch Pressure circuit, P1790 Fault after 1st shift. I can't believe with all these codes it would be internal but who knows?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 158 Answers

I agree, this is a lot of codes. I would tend to think this would be electrical, perhaps computer are a loose connection? These trannys I have rebuilt so far usually have a couple of codes related to the problem but not this many - all over the place.

Posted on Apr 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Chrysler Town and Country won't start. Lights, radio and horn works just fine. Even put in a new starter and still get nothing. Ran a wire from battery to the starter and got a little kick.


Chrysler Town & Country Questions - My van won't start ...

www.cargurus.com > Questions > Chrysler > Town & Country

CarGurusSep 29, 2008 - ckf2004 answered 4 years ago. I have a 96 chrysler town and countrylx and the engine died, turned over but wouldn't start, I researched and replace the flywheel .... My van sometimes won't start because it kills the battery.

My town & country 2004 wont start sometimes - CarGurus

www.cargurus.com > Questions > Chrysler > Town & Country

CarGurusMy town & country 2004 wont start sometimes - My van start doing something really weird. it will ... Asked by TownCountryguy May 03, 2013 at 03:31 PM about the 2004 Chrysler Town & Country Base .... Sometimes you tap it & it won't work.

Van won't start - Chrysler town and country - YouTube

? 1:01
https://www.youtube.com/watch?v=mkEL2vlLZr0
Jun 26, 2014 - Uploaded by Philip Walker
We have the same issue currently...very randomly...with our 2008 Caravan at the moment. Wife just got ...

2011 Chrysler Town & Country Engine Won't Turn Over, Will ...

www.carcomplaints.com/Chrysler/Town_Country/.../engine_wont_turn_...
The 2011 Chrysler Town & Country has 34 complaints for engine won't turn over, will not start. Average repair cost is $902.00 at 58178 miles.

Jan 14, 2016 | Chrysler Cars & Trucks

1 Answer

2003 Chryser Town and country - First to send gear bump, bump grab.


Then you have an internal transmission failure from poor workmanship on the rebuild.

Oct 28, 2012 | 2003 Chrysler Town & Country

3 Answers

My 1998 Chrysler Town & Country starting is disabled. Had a mobil locksmith come out to re-program the keys but he said that the reason the vehcile wouldn't start had nothing to do with the...


If your van starts about 3 times. Immediately stops 3 times. Then doesn't start. You have a bad solder in your dash. Usually, the way to test is this is to spank the dash briskly. This seems to rejoin the bad solder and your Van with start. If this does the trick, take it to your repair person. Tell him to take out the instrument cluster and resolder the connections. This will fix it. We have fixed 2 or three vans the same way.

Sep 09, 2011 | 1998 Chrysler Town & Country

1 Answer

Hi, This morning I was driving my 2000 Chrysler Town and Country van, and I was at a stop and I put my foot on the gas, and it revved really high, but wouldn't go anywhere. I turned it off, and...


Check your transmission fluid level as noted on the trans. dipstick. If low add to proper fill level but Do Not overfill ! If it is low this may solve your problem if not it mat require shop service. Possibly a new transmission filter or maybe worse a trans overhaul.

May 27, 2011 | Chrysler Town & Country Cars & Trucks

1 Answer

It will only drive in 3 and will not go in revverse


Turn the key on and off 3 cycles ending in on position (rapidly) watch odometer, codes should cycle through, if you see a p0700 it is going to be a transmission overhaul. :(

Jan 24, 2010 | 2001 Chrysler Town & Country

1 Answer

My van stalls when i let off the gas?`


i have replaced most things on the van due to same issue.. im going to do the map sensor next.. good luck.. if questions, email me at meduso99@yahoo.com

Nov 09, 2009 | 1994 Chrysler Town & Country

1 Answer

Coolant fans will not stop running on a 2001 crysler town and cou


You may need to replace the Temperature Control Sensor. Located at the engine near the thermostat housing.

Mar 03, 2009 | 2001 Chrysler Town & Country

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

5,747 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

85108 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...