Question about 1998 Land Rover Discovery

1 Answer

I would like to know if it is possible to unlock the differential on my 1998 landrover discovery so that I dont have to be in 4wd all of the time.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Short answer no! The vehicle is designed to be in 4x4 mode all the time. Long answer is Yes! But you will have to remove the Front propshaft and select Diff lock on (Small gear lever in front of main gear lever). When the diff lock is on a green light will illuminate on the dash near the speedo. This is not recommended for long duration, but is pefectly OK for a short trip on road to get you out of a fix, or for fault finding.

Posted on Apr 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Installing brake light switch on 1998 landrover discovery


Make sure your 4wd shifter is in correct position and hasn\'t slipped out. I had that problem and pulled my hair out for a day until I found that something bumped the stick out of its normal spot.

Mar 24, 2013 | 1998 Land Rover Discovery

1 Answer

I need a free wire diagram for 98 landrover discovery. any ideas?


you can google free wiring diagrams for 1998 land rover discovery.they show many different diagrams

Jan 21, 2011 | 1998 Land Rover Discovery

1 Answer

Need radio code for 1999 landrover discovery 1


Hi,

Can you confirm what brand the stereo is? If it is the Visteon brand that Landrover fit then I can help. Just let me know.

Thanks.

Apr 03, 2010 | 1999 Land Rover Discovery

1 Answer

The center differential moves but does not dissengauge the 4x4


Landrover Discovery is a permanent 4x4.
Its four wheel drive only (or freewheeling in neutral)

Feb 03, 2010 | 1998 Land Rover Discovery

1 Answer

Landrover discovery, automatic... i cannot


could be eithor

AAMCO gives free estaments and they are the experts in this feild

Jan 19, 2010 | 1995 Land Rover Discovery

1 Answer

Is it possible to buy the washers for my landrover discovery 1998 shock absorbers. maybe I should just buy the shock absorbers. I find there is a squeeking sound on my right tire. at close inspectino, i...


Are we talking about the plastic-rubber cover on the shock absorbers?
Yes they can be replaced.However if they are worn then you better replace them quickly before dirt and dust damages your shocks.

Jul 23, 2009 | 1998 Land Rover Discovery

1 Answer

I connect a 1997 landrover discovery computer to the 1994 landrover discovery and it won't start.


if it is a mems unit , it will need to be programed to the key fob and alarm . (there is no way round it).

May 21, 2009 | 1994 Land Rover Discovery

2 Answers

Landrover 96


The differentials should be disengaged or you going to do damage. They should only be locked in when moving at low speeds.

May 07, 2009 | 1996 Land Rover Discovery

1 Answer

Landrover discovery wont start but battery is good


This usually is the starter, especially if your truck has had an oil leak going for a while as the oil will run down into the starter and cause it to intermittenly fail. Also check your battery terminals and make sure you have a good connectivity.

Mar 27, 2009 | 1998 Land Rover Discovery

1 Answer

Cylinderhead bolts torque settings


According to my haynes manual for Landrover 200tdi, G - S reg,1989-1998 it goes as follows,
Stage 1:- Tighten all bolts to 30lb ft or 40Nm then
Stage 2:- Angle tighten a further 60 degrees then
Stage 3:- Angle tighten a further 60 degrees again.

Nov 29, 2008 | 1994 Land Rover Discovery

Not finding what you are looking for?
1998 Land Rover Discovery Logo

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...