Question about 1993 Toyota Camry V6

1 Answer

Toyota camry 1993 4 cyl car the hydraulic fluid line entering the pump close to the left rear wheel got rusted and is leaking,and needs replacement.Please let me know what parts will be required and what should be the cost to get the job done.

Posted by on

  • haikoi Apr 16, 2009

    Thanks countrycurt. My mechanic will do the job. I just wanted to guess the work involved and the cost. Thank you

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Toyota Master
  • 1,779 Answers

Brake lines are not expensive, you can purchase different diameters, and lengths at any parts store. If the line is rusted and leaking, the rest of the brake line system needs to be visually inspected, as usually when a line rusts through, the rest of the system is probably rusting away and may also need replacement.
So, although the parts are not expensive, this is a lousy labor intensive job. The lines will be rusted at connections and difficult to separate, and brake system will have to be bled to remove all air. Your safety is of the utmost importance, so get this fixed before you drive it. To fix the one line should not cost much, to replace all the brake lines could cost several hundred $. If you can do it yourself, you can save a lot, but as I said, it's a lousy job, especially if you don' have a lift to raise the car for easier access. Good luck.

Posted on Apr 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power steering fluid leak in 99 Toyota Corolla


look for split in the hard line where fluid is leaking. If you see split, change the line only. make sure power steering reservoir is filled and rack and pinion is full (charge with steering wheel left/right motion). You should be able to remove wheel and inside wheel panel to see power steering fluid shooting out of any hole. There is hydraulic pressure on the lines.

Apr 03, 2014 | 2003 Kia Spectra

2 Answers

Replaced some brake line, rear pads and one rear wheel cylinder. Now no pressure and nothing happening when trying to bleed.


Does the car have ABS ? And does it have an equalizer block for the 4 wheels ?
It sounds like the ABS has been affected, or there is an equalizer block that is stuck on the front wheels only.
Can you open the bleeder or the rear line on the master cyl and get fluid to come out by depressing the pedal ?

Jul 07, 2013 | 1997 Mercury Tracer

1 Answer

1996 camery station wagon , 4 wheel disc brakes. need to replace brake lines in the rear. what is the name of the junction block , with the actuator in the rear? All 4 rear lines go to and leave this...


Hello, first you Toyota has dual braking system. It goes like this: Left front brake with right rear brake, the right front brake with left rear brake. This a braking safety system that has been incorporated in auto/trucks for a few years now. If brake line is broken. loose wheel caliper, blow caliper piston, any thing that happens to the brake system. You will still have two wheels that have their hydraulic system. Also, the emergency brake will a manual system for the rear wheels.


Why do you need to change your auto brake lines? That valve you are talking about is a load stabilizer valve. It used to limit the amount of hydraulic fluid as more load is place in the rear of your Toyota. Example. by press on the brake pedal, it activates hydraulic pressure to the four wheel disk braking system. The braking system needs to stabilize the hydraulic pressure to the wheel to keep the vehicle moving in a forward motions. Now, by loading the rear of the vehicle this transfer the load disposition of the vehicle by making it heaver in the rear. Therefore, the load compensator valve limit the amount of hydraulic pressure to the rear brakes.



Another thing to remember about this rear load valve, they will get plugged. and the vehicle will not have enough braking pressure for the rear wheels. I hope I answer you question about this load portion valve in the rear of Toyota. GB...stewbison

Sep 21, 2011 | 1996 Toyota Camry

4 Answers

How to air bleeding in break system by step by


you need two persons
open the bleeder screw on the wheel that is furthest from the master cylinder and do the nearest last.
have a person pump on the brake pedal and hold firm while you open the screw, then close it before tell the person pump again
repeat until you see no more air come out
make sure you fill up the master cylinder, do not let it run out of fluid

Feb 26, 2010 | 1998 Toyota Camry

1 Answer

1987 CAMRY. back brake lines were replaced 9


sound like the wheel cylinder is bad

Feb 01, 2010 | 1987 Toyota Camry

1 Answer

Break line leaking to the rear left wheel


If it is the line itself, it will have to be replaced. There are some very high pressures generated within the hydraulic system. If this is since having repair work done I suggest returning the vehicle ASAP. if the line blows you may loose one brake circuit.

Jan 17, 2010 | 1993 Toyota Corolla

4 Answers

Is it the power steering pump or the line that's leaking?


Stop driving it before you ruin the pump or steering rack. Replace any leaking hoses, flush the system with correct fluid and fill.

Sep 27, 2009 | 1991 Toyota Camry

1 Answer

No pressure when i press break, slight leak under left rear tire,


1st need to know where the leak is? Is it a rusted line, or? To bleed after repairing leak, do the following: Have a helper start the Jeep, go to the wheel the greatest distance from the master cylinder, have helper pump brake pedal 3 times, pushing down about 1/2 way on pedal each time. 3rd time, he should hold pedal at 1/2 way down point while you open bleeder to let air/fluid out. As flow is about to stop, close bleeder. Repeat til all air removed. Check master cyl and refill often, because if you draw in air, you have to start all over. Go to the next wheel that's now the greatest distance from master cyl, repeat, til you get to wheel closest to master cyl. Done!!

Apr 22, 2009 | 1999 Jeep Cherokee

1 Answer

Replacing the cooling fan on a 1993 toyota camry


On the '92-95 V6 Camry, the radiator fan is hydraulically operated by the power steering fluid and power steering pump. If the fan isn't running as fast as it should be, check your power steering fluid level.

Feb 03, 2009 | 1993 Toyota Camry V6

Not finding what you are looking for?
1993 Toyota Camry V6 Logo

243 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...