Question about 1989 Chevrolet Caprice

2 Answers

Changing headlight how do I change headlight on 1998 chevy tahoe?

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

How do i take out the head light on a 1989 chevy caprice

Posted on May 29, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

They are usually changed from inside the engine compartment. you should be able to gain access to the bulb behind each headlight bazel. the socket often has to be turned to remove it. be careful not to touch the new bulb with your fingers as that will shorten it's lifespan. you may have to remove the battery if the burnt out bulb is on that side.


Please take a moment to rate this solution... thanks

Posted on Apr 16, 2009


4 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: changing inside door handle on

They break all the time. Pop the trim peice off around the handle. There are 3 tabs between the trim peice and the handle. Remove 2 screws in the arm rest of door where you grab it to close the door. Now it's best t o use a trim panel tool to pop the door panel off but a long screw driver will do in a pinch. Pop off triangle shaped peice by outside mirror first as it sits on top of door panel then the door panel. Once it's popped loose around sides and bottom it lifts off. Let it hang or unplug the wiring to completely remove. Should leave the broken handle. If it has not been replaced before it should have a silver rivet on the bottom side. Drill it out or cut the head off. Then push the handle assembly forward 1/2 inch and it should pull out.There will be 2 rods connected on the backside that should pull out. Re-install in reverse order. Some handles will have a screw to replace the rivet some won't, either way works.

Posted on Jul 06, 2008

  • 1986 Answers

SOURCE: How do you change the interior drivers door handle on a 1998

You'll need to remove your door panel (screws are by the door handle, arm rest, under door and side of door) and then unhook the rod attached to the handle lever and reverse to put on...

Posted on Aug 12, 2009

  • 5081 Answers

SOURCE: how do i change the headlight bulbs in my 2007

Pop the hood and locate the rubber piece that is behind the headlight. Remove the plastic screw that holds it in place and you can easily just bend down the rubber piece to gain access to the bulbs. The driver side is a little tighter to get into because it sits next to the windshield washer fluid container.The passenger is a lot easier but you do have to remove the air box which is very easy.

Posted on Nov 07, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Where is the fuel reset button on a 1998 Chevy Tahoe

There is no fuel reset button on Chevy vehicles . I suggest you watch this video on fuel pump relay testing . GM Fuel Pump Relay Testing Because this is what is involved in trouble shooting fuel pump systems on GM vehicles !

Sep 21, 2015 | Cars & Trucks

1 Answer

I have a 1998 Chevy tahoe that the parking lights will not shut off with the switch . The only way to get them turned off is by unhooking the battery. pulling the fuse wont even get them off... Whats

You've got a shorted switch. Change it. Try unplugging the switch and see what happens. You may have shorted wires somewhere. If you have a trailor hitch recepticle, check that for bad wiring also. Melted wires go unseen under tape or plastic protector sleeve. Mostlikely it's the switch for the headlights.

Jan 16, 2013 | 1998 Chevrolet Tahoe

1 Answer

How to disengage transfer switch 1998 tahoe

my 2001 chevy silverado would not swich some time and with a lot of agravation of repeat pushing of the buttons. change out the 4x4 switches in the dash solved the problem, the orginal switches soldering cracked makeing for bad connections "transfer case switch" Auto parts warehouse

Oct 10, 2012 | 1998 Chevrolet Tahoe

1 Answer

How to change the drl on a 2007 Chevy tahoe. Found on solution about a round metal lever u turn and pull the headlamp out, but mine does not have that?????

at the top of the headlight, there should be 2 metal rods to pull up and then remove the headlight, then you will need to release the bottom light housing. when you look at it, you will then be able to figure it out, its not rocket science.

Jun 05, 2010 | 2007 Chevrolet Tahoe

1 Answer

How do you change the interior drivers door handle on a 1998

You'll need to remove your door panel (screws are by the door handle, arm rest, under door and side of door) and then unhook the rod attached to the handle lever and reverse to put on...

Aug 10, 2009 | 1998 Chevrolet Tahoe

1 Answer

1998 Chevy Tahoe Need an exploded view of the head light on the passenger side can't figure out where to start to change the bulb. Needs a high and low beam change but it's behind the battary and a bunch...

When you raise the hood if you look at the top of the light you should see two round bars. They are silver in color. Pull gently on these towards the front of the vehicle. when they unsnap pull straight up on these. this should release the light. Make sure you are holding the headlight so it does not fall.

Mar 09, 2009 | 1998 Chevrolet Tahoe

1 Answer

How do i change a headlight

there is two l shaped bars that you turn and pull straight up then pull the headlight assembly out the front. after that you can snap the parking light assembly out and change the daytime running lights if they are burned out.

Nov 30, 2008 | 1999 Chevrolet Tahoe

1 Answer

2003 Chevy Tahoe

you have to pull the headlights out,by pulling out the bars on top of them.remove the headlight then each daytime lamp will have a clip at each end.when you unclip them you will see the bulbs.

Sep 14, 2008 | 2007 Chevrolet Tahoe

Not finding what you are looking for?
Cars & Trucks Logo

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides