Question about 2002 Mazda MPV

1 Answer

I'm trying to repace the driver's side turn signal - 2002 MPV

I'm trying to repace the driver's side turn signal light in my 2002 Mazda MPV. I've removed the upper screw that hold in the light assembly, but can't get the assembly to pull out. I'm scared of applying too much force in case the light assembly breaks. Any suggestions? Thanks!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 54 Answers

If you have ll the screws out then you just need to work it out. there a ball on the lens that pops into a socket on the frame. if it never been removed its a bit of a struggle

Posted on Apr 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mazda mpv 2002. Cooling fans will only turn on


Also check your fan relays, they're located on the left side by the washer fluid in a rectangle black box. If your check engine light isn't on, leave be, they're ok..

Oct 05, 2014 | 2002 Mazda MPV

1 Answer

I have a mazda mpv 2002. Fans do not work unless the ac is on. Changed the cfm and still the same. Could cooling temp sensor be not signalling the module while still operating normal temperature readings


The fans will not come on till the temperature is above about 90 degrees so it sounds like yours is working ok! The fans will come on as soon as the AC is turned on!

Oct 05, 2014 | 2002 Mazda MPV

1 Answer

2000 mazda mpv turn signal repair


check the fuses . the box is under the steering column left side check the one which indicates turn signal

Apr 07, 2014 | 2000 Mazda MPV

1 Answer

Turn signal not working


your first place to look is the indicator bulb it self take the holder out of the back of the indicator hold bulb up to a light and check that it is not blowen if it is replace bulb at you local servo and away you go. if it is not the case check the wiring with a multimeter.

Apr 03, 2014 | 2002 Mazda MPV

1 Answer

Where is the turn signal relay on a 1998 Mazda MPV?


It could be a fault of the multifunction switch

Feb 24, 2013 | 1998 Mazda MPV

1 Answer

Indicator lights dont work but the rest do bulbs have just been changed where will i find fuse for mazda mpv 2002


Are you refering to your turn signal indicator lights? Do your turn signals work on the front and rear of the vehicle? If so, the problem is NOT a fuse.

If you are not talking about your turn indicators, I would need further explaination before I could tell you where any fuses are located

Please also review this article and post a "comment" if you would like further assistance:
Where's The Fuse?

Aug 28, 2011 | 2002 Mazda MPV

1 Answer

MAZDA MPV 2002 LJ102 - Drivers side door lock won't latch - small clip inside has broken - realise it is not separate lock and actuator but one sealed unit - need to source one ASAP - can you help??


The only place you are going to find those parts is at the dealer or a salvage yard. The dealer may even be able to get just the clip, but sometimes (especially with Mazda) you will have to buy the complete door latch assembly.

Feb 08, 2011 | 2002 Mazda MPV

1 Answer

2000 mpv . my dash and turn signals stopped working. i have no fuel guage, odometer, rpm, temp guage or turn signal. the turn signals do work if the hazard lights are turned on. the battery also goes dead...


drivers side kick pannel remove it and you will see lots of conectors make sure that they are pluged in i have see this problem befor. or boky controll mod is shot

Nov 28, 2010 | 2000 Mazda MPV

2 Answers

2002 Mazda MPV Alarm problems


I had the same problem on my moms Mazda MPV. The solution is simple... Go on the passenger side; turn the key clockwise then turn it counter clockwise. That should turn off the alarm. What you can do to get some silence is to just remove the appropriate fuse, you will find the alarm will also be dissabled but the emergency lights will still flash, indicating that you are not out of the woods

Jun 09, 2009 | 2002 Mazda MPV

Not finding what you are looking for?
2002 Mazda MPV Logo

Related Topics:

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...