Question about 2002 Ford Taurus

1 Answer

Misfire in 1 & 2 cylinders after changing wires plugs and coil

Ive change the plugs wires and the coil and i now get a misfire in #1 and #2 cylinders it first was #2 but now both i change the coil again and it reads the same thing

Posted by on

  • chefshah1 Apr 16, 2009

    thanks shack i will try this and i'll hit you back with the outcome thanks so much

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 255 Answers

Since the problems appeared after the work, it is in the work. prob is in wires or plugs.. take no 1 plug out put it back in wire terminal, re install one of you old plugs into no 1 cylnder have someone turn eng. over ck for bright spark repeat for no 2. make sure plug gap is correct. if no fire to you plugs. then you know what to do replace the wires.

hope2help shack

Posted on Apr 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ive a 2004 520i i had a warning coming up saying engine fault could damage catalytic converter, so i checked it on my mates dyiagnostic computer and said cylinder 2 misfire. i replaced all plugs and t


I would have swapped coils first. If the code goes for one to the other, it is the coil. If it stays the same, change that plug and or wire/boot. Next check the wiring . Breaks mostly close the the coil plug. Then head towards the injector.

Jan 24, 2015 | 2005 BMW 520i

1 Answer

What does this mean ? P1313 Misfire Rate Catalyst Damage Fault - Bank 1


This is an ignition error. that could one of several things wrong. since it is noted in Bank 1 it is a problem with the right side of the engine Cylinders 1, 3 or 5. located under the intake manifold (close to the firewall)
Other causes:
1. Fouled plug (cylinders 1, 3 or 5)
2. Bad ignition Coil (cylinders 1, 3 or 5)
3. Wire fault to Coils (cylinders 1, 3 or 5)
4. Fault with the O2 sensors (Right side bank 1)

1. Start by checking /changing the plugs. You have to remove the intake manifold to get to plugs (cylinders 1, 3 or 5). if the mileage is high and they have not been changed, then its probably due.
2. Inspect the coil wires for cracks or faults.
3. Swapping the coils cylinders 2, 4 & 6 for cylinders 1, 3 & 5. if the fault changes to bank 2 then you have a bad coil on 2, 4 or 6.

Oct 01, 2014 | 2003 Jaguar X-Type

1 Answer

Cylinder #1 continues to Misfire


What DTC code(s) are you getting?
You performed a compression test on cylinder #1; did you test cylinder #2?
Compare the readings, if there is a significant difference in compression readings between the two, you may have a bad head gasket, a bad valve, etc.
The bottom line, the problem is internal to the engine.

Dec 09, 2013 | 2002 Buick LeSabre

1 Answer

Cylinder 4 misfire the guy at autozone told me from the code it most likely can be the coil which is 64 dollars don't know if he's just trying to make a sale. And just found out the belt by the pulleys is...


Belt usually isnt the reason for a misfire, when was the last time you changed plugs and wires? If you hold the brake and put it in gear while still holding the brake apply the gas does it miss more then? Ive had to replace upper intake rubber gaskets that had 1 cylinder misfiring but ive also had it be a wire or a plug and yes even just a coil.

Jul 25, 2010 | 2003 Ford Escape

2 Answers

MY #2 CYLINDER IS MISFIRING ON A 2004 F-150 SUPER CREW CAB


Check spark plugs and wires. Could also be defective Coil.
I recommend replacing all plugs and wires at the same time.

Feb 27, 2009 | 2004 Ford F150

1 Answer

1998 Cavalier No Spark in cylinders 1 & 4


ignition mod. grounds,pcm or timing belt could all be it but, I would have to look at timing first.

Jan 13, 2009 | 1998 Chevrolet Cavalier

4 Answers

HI I HAVE A 2001 MAZDA TRIBUTE AND THE CODES PO301 AND PO303 CAME UP IN THE DIAGNOSTIC REPORT. THE CAR TURNS OFF WHEN I WARM IT UP IN THE MORNING IN THE COLD AND AFTER THAT ITS FINE I ALREADY CHANGED THE...


cylinder 1 misfire and low compression. Plugs and wires changed plus new fuel injectors. The engines still misses and no one can find the cause. When put on the computer it read misfire cylinder 1.

Dec 31, 2008 | 2004 Mazda Tribute

1 Answer

5vz-fe misfire codes


Replace the coil pack.

Dec 26, 2008 | 1999 Toyota 4Runner

2 Answers

99 4runner 5vz-fe 3.4 misfire


Replace the coil packs.
Your issue is NOT the converter, or you would have a P0420/P0430 code

Dec 26, 2008 | 2001 Toyota Tacoma

Not finding what you are looking for?
2002 Ford Taurus Logo

Related Topics:

300 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...