Question about 2005 Chrysler 300

1 Answer

I have a 2005 300 model. I noticed that the blinker was going fast notifying of a burnt out rear light blinker bulb. I have replaced the burnt out bulb but the right blinker still goes very fast and the rear blinker does not work at all. Any ideas of what is wrong? Is there a fuse or anything? Thanks in Advance, Cheers, James

Posted by on

  • info29 Apr 16, 2009

    Thanks ascott44...I have all lights working on the rear assembly just not blinking. The lights all have power and will light up but just not blink. I have been reading that there may be a flasher to replace? do you know of anything to do with this on the 300? I will check the fuse though. Cheers.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Using a test light check to see if there is power to the wire at the plug where the bulb is for the blinker. if so the socket is bad. if not check to see if the light assembly is working for ex. the parking lights or the brake light ect If those lights dont work then check the fuse for the right rear tail light. Hope this helps.

Posted on Apr 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Left front blinker works fast, the rear not at all. Left rear brake light doesn't work, but the right one does


Fast blinkers are a result of a blown bulb. Based on your description the left rear bulb is burnt out.

Mar 24, 2016 | Cars & Trucks

1 Answer

What would cause the blinker to blink very fast and the left rear blinker doesn't work.


You obviously have a bad connection somewhere in the taillight. Some trucks it is a common problem and the taillight circuit board is the problem.

Dec 17, 2015 | Cars & Trucks

2 Answers

My brake lights and rear blinkers are not working. I have replaced the bulbs in both brake lights. What next?


most blinkers uses relays, and when they flashes fast one light is out, but you replaced your burnt bulb might be a bad relay.

Sep 17, 2012 | 2007 Hummer H2 SUT

2 Answers

When i use the sighnal it flashes fast and only the front lights up the back dosent but the brake lights do light up


The fast blink signals that you have a flasher bulb burnt out, as I suspect you do in your rear turn signal. The flasher sees a voltage drop through the burnt out bulb and signals a fast flash.

Mar 24, 2011 | Chevrolet Impala Cars & Trucks

2 Answers

Right turn signal blinks very fast I have changes the light and all other lights on the rear but the problem still exists. 2003 passat wagon 4 cylinder


I had the same problem with my 2002 Jetta. The front right bulb wasn't working. I replaced the bulb and it still didn't work, that's when I found that the bulb could be inserted backwards! I turned the bulb 180 degrees and now the blinkers are normal.

Another thing I noticed was that one of the contacts on the bulb and socket were burnt. I bought the car used in 2010 and I verified that the flasher relay was replaced as part of the recall, so I don't know if the damage was done before the relay was replaced or I still have a problem. I will keep an eye on the bulb about one a month.

May 21, 2010 | Cars & Trucks

3 Answers

My left blinker just started blinking really fast a few days ago. what causes this


You have a bulb out on the side that flashes too fast, either front or rear check them both.

Mar 18, 2010 | 2005 Ford Five Hundred

2 Answers

Fast Blinker


Usually a fast turn signal means that there is a light out. You should probably check all of your lights, including back-up lights, and turn signals. If there is one out then replacing the burnt out bulb should fix the problem.

May 10, 2017 | 1997 Jeep Grand Cherokee

1 Answer

TURN SIGNAL BLINKS TO FAST RIGHT


The blinker usually blinks fast when a turn signal light is burnt or not contacting. Check the signal bulbs to see if they are contacting or in good condition. If that is not it. Try replacing the blinker under the dash.

Apr 05, 2009 | 2003 Chrysler Town & Country

Not finding what you are looking for?
2005 Chrysler 300 Logo

480 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8575 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...